Forming of metal-based composite parts
暂无分享,去创建一个
M. Merklein | S. Bruschi | J. Cao | J. Yanagimoto | M. Merklein | S. Bruschi | J. Yanagimoto | J. Cao
[1] R. Winand,et al. Electron conducting organic coating of mild steel by electropolymerization , 1992 .
[2] Jiaying Gao,et al. A Data-Driven Multiscale Theory for Modeling Damage and Fracture of Composite Materials , 2017, Meshfree Methods for Partial Differential Equations IX.
[3] V. Kräusel,et al. Development of hybrid assembled composites with sensory function , 2015 .
[4] Ke Han,et al. Microstructure and texture evolution of Cu–Nb composite wires , 2013 .
[5] Y. Mahajan,et al. Interfaces in discontinuously reinforced metal matrix composites: An overview , 1995 .
[6] L. Ceschini,et al. Forming of Metal Matrix Composites , 2014 .
[7] M. Pietrzyk,et al. Multi billet extrusion technology for manufacturing bi-layered components , 2012 .
[8] P. K. Mallick,et al. Composites engineering handbook , 1997 .
[9] R. Drew,et al. Wettability and spreading kinetics of Al and Mg on TiC , 2003 .
[10] A. Tekkaya,et al. Simultaneous deep drawing and cold forging of multi-material components: Draw-forging , 2019, CIRP Annals.
[11] I. Anderson,et al. Determining the role of surfaces and interfaces in the powder metallurgy processing of aluminum alloy powders , 2001 .
[12] A. Erman Tekkaya,et al. The non-hydrostatic response of polymer melts as a pressure medium in sheet metal forming , 2012, Production Engineering.
[13] Hiroshi Utsunomiya,et al. Ultra-fine grained bulk aluminum produced by accumulative roll-bonding (ARB) process , 1998 .
[14] Fabrizio Micari,et al. Joining by plastic deformation , 2013 .
[15] M. M. Aghdam,et al. Effects of Interphase Damage and Residual Stresses on Mechanical Behavior of Particle Reinforced Metal-Matrix Composites , 2014, Applied Composite Materials.
[16] E. Lavernia,et al. Thermal residual stresses in metal matrix composites: A review , 1995 .
[17] Hong D. Kang,et al. Failure criteria of unidirectional carbon fiber reinforced polymer composites informed by a computational micromechanics model , 2019, Composites Science and Technology.
[18] M. Merklein,et al. Embossing of Metal Inserts for Subsequent Assembly Injection Moulding of Media Tight Electronic Systems , 2015 .
[19] M. Wisnom. Factors Affecting the Transverse Tensile Strength of Unidirectional Continuous Silicon Carbide Fibre Reinforced 6061 Aluminum , 1990 .
[20] J. Llorca,et al. Micromechanical modelling of deformation and failure in Ti-6al-4V/SiC composites , 2001 .
[21] Miguel A. Bessa,et al. Self-consistent clustering analysis: An efficient multi-scale scheme for inelastic heterogeneous materials , 2016 .
[22] Peter Groche,et al. Icremental bulk metal forming , 2007 .
[23] V. Kräusel,et al. Heat supported single point incremental forming of hybrid laminates for orthopedic applications , 2019, Procedia Manufacturing.
[24] J. Yanagimoto,et al. Hybrid joining process for carbon fiber reinforced thermosetting plastic and metallic thin sheets by chemical bonding and plastic deformation , 2013 .
[25] Jason J. Williams,et al. Mechanical behavior and microstructure characterization of sinter-forged SiC particle reinforced aluminum matrix composites , 2002 .
[26] Onur Çoban,et al. A review: Fibre metal laminates, background, bonding types and applied test methods , 2011 .
[27] Hybrid and conventional particle reinforced metal matrix composites by squeeze infiltration casting , 2002 .
[28] F. Karimzadeh,et al. Fabrication and evaluation of mechanical and tribological properties of boron carbide reinforced aluminum matrix nanocomposites , 2011 .
[29] A. V. Konovalov,et al. A gravitational approach to modeling the representative volume geometry of particle-reinforced metal matrix composites , 2018, Engineering with Computers.
[30] H. Zoch,et al. Characterisation of the bonding zone of co‐extruded aluminium‐titanium‐compounds , 2012 .
[31] Jürgen Fleischer,et al. Composite materials parts manufacturing , 2018 .
[32] Richard Butler,et al. Static strength of metal-composite joints with penetrative reinforcement , 2014 .
[33] A. Jalali Aghchai,et al. Drawing potential of fiber metal laminates in hydromechanical forming: A numerical and experimental study , 2018, Journal of Sandwich Structures & Materials.
[34] C. Zopp,et al. Quasi-static and fatigue bending behavior of a continuous fiber-reinforced thermoplastic/metal laminate , 2019, Composites Part B: Engineering.
[35] Zerong Ding,et al. A review on forming technologies of fibre metal laminates , 2021 .
[36] Brad L. Kinsey,et al. Wrinkling behavior of laminated steel sheets , 2004 .
[37] Dieter H. Pahr,et al. Experimental investigation of a novel hybrid metal–composite joining technology , 2010 .
[38] W. Volk,et al. Fabrication and processing of metallurgically bonded copper bimetal sheets , 2019, Journal of Materials Processing Technology.
[39] M.S.J. Hashmi,et al. Metal matrix composites: production by the stir casting method , 1999 .
[40] M. Parsa,et al. Experimental and finite element study on the spring back of double curved aluminum/polypropylene/aluminum sandwich sheet , 2010 .
[41] Kotobu Nagai,et al. Progress in cold roll bonding of metals , 2008, Science and technology of advanced materials.
[42] Y. Nishida. Recycling of metal matrix composites , 2001 .
[43] K. Chawla,et al. Metal Matrix Composites , 2013 .
[44] H. Ding,et al. The influence of particles size and its distribution on the degree of stress concentration in particulate reinforced metal matrix composites , 2018, Materials Science and Engineering: A.
[45] Liangchi Zhang,et al. Microstructure-based modelling of fracture of particulate reinforced metal matrix composites , 2019, Composites Part B: Engineering.
[46] M.S.J. Hashmi,et al. The enhancement of wettability of SiC particles in cast aluminium matrix composites , 2001 .
[47] Faye Smith. Comeld™: An Innovation in Composite to Metal Joining , 2005 .
[48] Matthias Kleiner,et al. Composite Extrusion – Determination of the Influencing Factors on the Positioning of the Reinforcing Elements , 2006 .
[49] L. Lang,et al. Research of Different Processes for Forming Fiber Metal Laminates , 2019, International Journal of Automotive Technology.
[50] D. Mohr,et al. Plasticity of formable all-metal sandwich sheets: Virtual experiments and constitutive modeling , 2012 .
[51] Mathilda Karlsson Hagnell,et al. The economic and mechanical potential of closed loop material usage and recycling of fibre-reinforced composite materials , 2019, Journal of Cleaner Production.
[52] Orion L. Kafka,et al. Self-consistent clustering analysis for multiscale modeling at finite strains , 2019, Computer Methods in Applied Mechanics and Engineering.
[53] Beom-Soo Kang,et al. Hole and lead plug effect on fiber reinforced elastomeric isolator for seismic isolation , 2003 .
[54] Salah U. Hamim,et al. Carbon fiber reinforced metal matrix composites: Fabrication processes and properties , 2017 .
[55] G. A. Steinlage,et al. A comparison of three mechanical models for cold roll bonding metal laminates , 1996 .
[56] A. Kawasaki,et al. Investigation of carbon nanotube reinforced aluminum matrix composite materials , 2010 .
[57] N. Yoshikawa,et al. Localization simulation of a representative volume element with prescribed displacement boundary for investigating the thermal residual stresses of composite forming , 2020 .
[58] Xudong Cheng,et al. Ultrasonic-assisted fabrication of metal matrix nanocomposites , 2004 .
[59] M. Surappa,et al. Preparation and properties of cast aluminium-ceramic particle composites , 1981 .
[60] J. Lewandowski,et al. Mechanical behaviour of laminated metal composites , 1996 .
[61] Somnath Ghosh,et al. Concurrent multi-level model for damage evolution in microstructurally debonding composites , 2007 .
[62] G. Kumar,et al. Studies on Al6061-SiC and Al7075-Al2O3 Metal Matrix Composites , 2010 .
[63] Dong-Gyu Ahn,et al. Research trends of metallic sandwich plates with single layer periodically repeated metallic inner structures (PRMIS) - focused on design, manufacturing and formability , 2015 .
[64] Wei Chen,et al. Uncertainty quantification in multiscale simulation of woven fiber composites , 2018, Computer Methods in Applied Mechanics and Engineering.
[65] N. Baskar,et al. Magnesium matrix composite for biomedical applications through powder metallurgy – Review , 2020 .
[66] L. Alves,et al. Joining of polymer and metal tubes by cold forming , 2017 .
[67] William A. Curtin,et al. THEORY OF MECHANICAL-PROPERTIES OF CERAMIC-MATRIX COMPOSITES , 1991 .
[68] M. Hayat,et al. Titanium metal matrix composites: An overview , 2019, Composites Part A: Applied Science and Manufacturing.
[69] M. Benzeggagh,et al. Mixed-mode delamination fracture toughness of unidirectional glass/epoxy composites under fatigue loading , 1997 .
[70] Jia-lie Ren,et al. Characteristics and formation mechanism of porosities in CFRP during laser joining of CFRP and steel , 2015 .
[71] Jeffrey Wadsworth,et al. Ancient Blacksmiths, The Iron Age, Damascus Steels, and Modern Metallurgy , 2000 .
[72] A. Erman Tekkaya,et al. Forming properties of additively manufactured monolithic Hastelloy X sheets , 2019, Materials Science and Engineering: A.
[73] Haoran Chen,et al. Flexural strength and energy absorption of carbon-fiber–aluminum-honeycomb composite sandwich reinforced by aluminum grid , 2014 .
[74] J. Pelleg. Reactions in the matrix and interface of the Fe–SiC metal matrix composite system , 1999 .
[75] R. Müller,et al. Process Design for Hybrid Sheet Metal Components , 2015, Acta Metallurgica Sinica (English Letters).
[76] Jang‐Kyo Kim,et al. Separation behaviour of sheet steel laminate during forming , 1990 .
[77] Jinglei Yang,et al. A review on the hybrid titanium composite laminates (HTCLs) with focuses on surface treatments, fabrications, and mechanical properties , 2020 .
[78] D. Ray,et al. Novel thermoplastic fibre-metal laminates manufactured by vacuum resin infusion: The effect of surface treatments on interfacial bonding , 2019, Materials & Design.
[79] N. Khalifa,et al. Process Limits of Extrusion of Multimaterial Components , 2015 .
[80] Toru Kizaki,et al. Bendable metal-based composite sheets with a truncated dome core made of carbon fibre reinforced thermoplastics , 2020 .
[81] A. Esawi,et al. Effect of carbon nanotube (CNT) content on the mechanical properties of CNT-reinforced aluminium composites , 2010 .
[82] M. D. Huda,et al. MMCs: Materials, Manufacturing and Mechanical Properties , 1995 .
[83] Ramana G. Reddy,et al. Recycling of aluminum metal matrix composite using ionic liquids:: Effect of process variables on current efficiency and deposit characteristics , 2005 .
[84] M. Sadighi,et al. Investigation of high velocity impact of cylindrical projectile on sandwich panels with fiber–metal laminates skins and polyurethane core , 2014 .
[85] M. Krishna,et al. Magnesium matrix composites for biomedical applications: A review , 2019, Journal of Magnesium and Alloys.
[86] B. M. Dariani,et al. An Analytical Model for Nonhydrostatic Sheet Metal Bulging Process by Means of Polymer Melt Pressure , 2018, Journal of Manufacturing Science and Engineering.
[87] M. Chmielewski,et al. The Influence of the Particle Size on the Adhesion Between Ceramic Particles and Metal Matrix in MMC Composites , 2016, Journal of Materials Engineering and Performance.
[88] R. Hill. A self-consistent mechanics of composite materials , 1965 .
[89] A. Tekkaya,et al. Analytical and experimental bond strength investigation of cold forged composite shafts , 2019, Journal of Materials Processing Technology.
[90] J. Tirillò,et al. Effect of temperature and fiber type on impact behavior of thermoplastic fiber metal laminates , 2019, Composite Structures.
[91] Young-Rae Cho,et al. Effects of annealing on the mechanical and interface properties of stainless steel/aluminum/copper clad-metal sheets , 2007 .
[92] Dong-Yol Yang,et al. Bendable metallic sandwich plates with a sheared dimple core , 2010 .
[93] P. Bazhin,et al. Ti-B-based composite materials: Properties, basic fabrication methods, and fields of application (review) , 2018 .
[94] R. Baptista,et al. Joining aluminium profiles to composite sheets by additive manufacturing and forming , 2020 .
[95] D. Fang,et al. A data-driven self-consistent clustering analysis for the progressive damage behavior of 3D braided composites , 2020 .
[96] W. Cantwell,et al. Stretch forming studies on a fibre metal laminate based on a self-reinforcing polypropylene composite , 2012 .
[97] Niels Bay,et al. A Numerical Model for Cold Welding of Metals , 1996 .
[98] K. Al-Ghamdi,et al. On the comparison of formability of roll-bonded steel-Cu composite sheet metal in incremental forming and stamping processes , 2016 .
[99] J. Allwood,et al. Incremental Forming of Sandwich Panels , 2007 .
[100] C. Venkatesh,et al. A comprehensive review on material selection, processing, characterization and applications of aluminium metal matrix composites , 2019, Materials Research Express.
[101] S. Nutt,et al. Ductile-Phase Toughening in TiBw/Ti-Ti3Al Metallic-Intermetallic Laminate Composites , 2015, Metallurgical and Materials Transactions A.
[102] K. Chawla,et al. Metal Matrix Composites , 2006 .
[103] M. Liewald,et al. Production of Aluminium Based Interpenetrating Phase Composites Using Semi-Solid Forming , 2016 .
[104] Rob Boom,et al. Recycling of composite materials , 2012 .
[105] D. McDowell. A perspective on trends in multiscale plasticity , 2010 .
[106] E. Maire,et al. On the competition between particle fracture and particle decohesion in metal matrix composites , 2004 .
[107] J. Yanagimoto,et al. Enhancement of bending formability of brittle sheet metal in multilayer metallic sheets , 2010 .
[108] Xin-Mingm Zhang,et al. Finite element analysis of forming of sheet metal blank in manufacturing metal/polymer macro-composite components via injection moulding , 2002 .
[109] Rafael Wertheim,et al. Energy-efficiency in a Hybrid Process of Sheet Metal Forming and Polymer Injection Moulding , 2016 .
[110] T. Masui,et al. Development of Nonferrous Clad Plate and Sheet by Warm Rolling with Different Temperature of Materials. , 1991 .
[111] P. Withers,et al. An introduction to metal matrix composites , 1993 .
[112] Merton C. Flemings,et al. Solidification processing of metal-matrix composites , 1988 .
[113] Min Song,et al. Effects of particle size and distribution on the mechanical properties of SiC reinforced Al–Cu alloy composites , 2011 .
[114] I. Sinclair,et al. Simulation and quantitative assessment of homogeneous and inhomogeneous particle distributions in particulate metal matrix composites , 2001, Journal of microscopy.
[115] A. Mamalis,et al. Macroscopic and microscopic phenomena of nickel/titanium “shape-memory” bimetallic strips fabricated by explosive cladding and rolling , 1994 .
[116] M. Salimi,et al. Analytical and experimental analysis of the formability of copper-stainless-steel 304L clad metal sheets in deep drawing , 2016 .
[117] N. Khalifa,et al. Thermoplastic fibre metal laminates: Stiffness properties and forming behaviour by means of deep drawing , 2018 .
[118] R. Trivedi,et al. Development of solidification microstructures in the presence of fibers or channels of finite width , 1989 .
[119] M. R. Toroghinejad,et al. Application of ARB process for manufacturing high-strength, finely dispersed and highly uniform Cu/Al2O3 composite , 2010 .
[120] A. Erman Tekkaya,et al. An Experimental and Numerical Investigation on Polymer Melt Injected Sheet Metal Forming , 2012 .
[121] Antal Dér,et al. Economic evaluation of alternative process chains for the large-scale manufacturing of metal-fibre laminates , 2019 .
[122] B. Behrens,et al. Forming sheets of metal and fibre-reinforced plastics to hybrid parts in one deep drawing process , 2014 .
[123] Marion Merklein,et al. Tailored Heat Treated Accumulative Roll Bonded Aluminum Blanks: Microstructure and Mechanical Behavior , 2012, Metallurgical and Materials Transactions A.
[124] Tongxi Yu,et al. Forming and failure behaviour of coated, laminated and sandwiched sheet metals: a review , 1997 .
[125] M. Li,et al. Evaluation and simulation on deformation instability mechanism in laminated sheet incremental forming , 2019, Procedia Manufacturing.
[126] J. Lewandowski,et al. Forging of Discontinuously Reinforced Aluminum Composites , 2013 .
[127] R. Müller,et al. Process combinations for the manufacturing of metal-plastic hybrid parts , 2016 .
[128] T. Nieh,et al. Development of Isotropic, Micro-Toughened Titanium-Base Intermetallic Composites for High-Temperature Service Final Report CRADA No. TC-0497-93A , 1998 .
[129] Stefania Bruschi,et al. An Approach to Modelling the Forming Process of Sheet Metal-Polymer Composites , 2007 .
[130] W. Drossel,et al. Electromagnetic joining of hybrid tubes for hydroforming , 2014 .
[131] Wei Liu,et al. Forming limit diagram prediction of AA5052/polyethylene/AA5052 sandwich sheets , 2013 .
[132] R. M. Afonso,et al. A new type of bi-material coin , 2019, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture.
[133] Michael Schmidt,et al. A New Process Chain for Joining Sheet Metal to Fibre Composite Sheets , 2014 .
[134] de R René Borst,et al. Delamination buckling of fibre–metal laminates , 2001 .
[135] B. Liu,et al. Compositionally gradient Ti-Ta metal-metal composite with ultra-high strength , 2018 .
[136] Yingbin Hu,et al. A review on laser deposition-additive manufacturing of ceramics and ceramic reinforced metal matrix composites , 2018, Ceramics International.
[137] Markus Bambach,et al. Experimental and numerical investigation of grid sheet bending behavior in four-roll bending , 2010 .
[138] V. L. Acoff,et al. Using cold roll bonding and annealing to process Ti/Al multi-layered composites from elemental foils , 2004 .
[139] Farghalli A. Mohamed,et al. Particulate reinforced metal matrix composites — a review , 1991, Journal of Materials Science.
[140] Birgit Awiszus,et al. Forging of Lightweight Hybrid Metallic-Plastic Components , 2017 .
[141] Veera Aditya Yerra,et al. Analysis of a hybrid process for manufacturing sheet metal-polymer structures using a conceptual tool design and an analytical-numerical modelling , 2020 .
[142] On the role of shear strength in sandwich sheet forming , 2005 .
[143] Huang-Chi Tseng,et al. Experimental and numerical analysis of titanium/aluminum clad metal sheets in sheet hydroforming , 2011 .
[144] Jun Yanagimoto,et al. Design and fabrication of formable CFRTP core sandwich sheets , 2019, CIRP Annals.
[145] E. A. Flores-Johnson,et al. Mechanical characterization of fiber metal laminate based on aramid fiber reinforced polypropylene , 2017 .
[146] Taylan Altan,et al. Testing and modelling of material behaviour and formability in sheet metal forming , 2014 .
[147] K. Drechsler,et al. The effect of fiber undulation on the strain field for pinned composite/titanium joints under tension , 2017 .
[148] George J. Dvorak,et al. Micromechanics of composite materials , 2013 .
[149] S. Richter,et al. Roll‐Bonded Titanium/Stainless‐Steel Couples, Part 1: Diffusion and Interface‐Layer Investigations , 2009 .
[150] R. M. Pillai,et al. Reinforcement coatings and interfaces in aluminium metal matrix composites , 1998 .
[151] Mica Grujicic,et al. An overview of the polymer-to-metal direct-adhesion hybrid technologies for load-bearing automotive components , 2008 .
[152] Behrens Bernd-Arno,et al. Forming and Joining of Carbon-Fiber-Reinforced Thermoplastics and Sheet Metal in One Step , 2017 .
[153] M. Merklein,et al. Potential of Joining Dissimilar Materials by Cold Formed Pin-Structures , 2020 .
[154] P. C. Mishra,et al. Properties of ceramic-reinforced aluminium matrix composites - a review , 2014 .
[155] J. Shiomi,et al. Hot extrusion to manufacture the metal matrix composite of carbon nanotube and aluminum with excellent electrical conductivities and mechanical properties , 2015 .
[156] H. Nassar,et al. On the gas pressure forming of aluminium foam sandwich panels: Experiments and numerical simulations , 2012 .
[157] L. Philippe,et al. Composite Metamaterials: Types and Synthesis , 2021 .