3D extrusion bioprinting

[1]  Y. S. Zhang,et al.  Emerging Technologies in Multi‐Material Bioprinting , 2021, Advanced materials.

[2]  Y. S. Zhang,et al.  A 3D‐Bioprinted Multiple Myeloma Model , 2021, Advanced healthcare materials.

[3]  Carlos Ezio Garciamendez-Mijares,et al.  State-of-art affordable bioprinters: A guide for the DiY community , 2021, Applied Physics Reviews.

[4]  Qingyang Wu,et al.  Ferromagnetic soft catheter robots for minimally invasive bioprinting , 2021, Nature Communications.

[5]  L. Geris,et al.  Self-Oxygenation of Tissues Orchestrates Full-Thickness Vascularization of Living Implants , 2021, Advanced functional materials.

[6]  Carlos Ezio Garciamendez-Mijares,et al.  Engineering (Bio)Materials through Shrinkage and Expansion , 2021, Advanced healthcare materials.

[7]  A. Tamayol,et al.  Controlling cellular organization in bioprinting through designed 3D microcompartmentalization. , 2021, Applied physics reviews.

[8]  Y. S. Zhang,et al.  Handheld bioprinting strategies for in situ wound dressing. , 2021, Essays in biochemistry.

[9]  W. Hwang,et al.  Light‐Activated Decellularized Extracellular Matrix‐Based Bioinks for Volumetric Tissue Analogs at the Centimeter Scale , 2021, Advanced Functional Materials.

[10]  Juan F Yee-de León,et al.  High-Throughput and Continuous Chaotic Bioprinting of Spatially Controlled Bacterial Microcosms. , 2021, ACS biomaterials science & engineering.

[11]  Ibrahim T. Ozbolat,et al.  Intra‐Operative Bioprinting of Hard, Soft, and Hard/Soft Composite Tissues for Craniomaxillofacial Reconstruction , 2021, Advanced functional materials.

[12]  Zhizhou Zhang,et al.  Monitoring Anomalies in 3D Bioprinting with Deep Neural Networks. , 2021, ACS biomaterials science & engineering.

[13]  Y. S. Zhang,et al.  Programmable microbial ink for 3D printing of living materials produced from genetically engineered protein nanofibers , 2021, Nature Communications.

[14]  P. Janmey,et al.  Programmable and contractile materials through cell encapsulation in fibrous hydrogel assemblies , 2021, bioRxiv.

[15]  D. Kelly,et al.  3D Bioprinting of Prevascularised Implants for the Repair of Critically Sized Bone Defects , 2021, Acta biomaterialia.

[16]  Juan F Yee-de León,et al.  Continuous chaotic bioprinting of skeletal muscle-like constructs , 2021 .

[17]  C. Marquette,et al.  Rheology, simulation and data analysis toward bioprinting cell viability awareness , 2021 .

[18]  M. Zenobi‐Wong,et al.  Bioprinting of Cartilaginous Auricular Constructs Utilizing an Enzymatically Crosslinkable Bioink , 2021, Advanced Functional Materials.

[19]  Wei Sun,et al.  Printability in extrusion bioprinting , 2021, Biofabrication.

[20]  Daniel J. Shiwarski,et al.  Emergence of FRESH 3D printing as a platform for advanced tissue biofabrication , 2021, APL bioengineering.

[21]  Zainab N. Khan,et al.  Ultrashort Peptide Bioinks Support Automated Printing of Large-Scale Constructs Assuring Long-Term Survival of Printed Tissue Constructs. , 2021, Nano letters.

[22]  Lianqing Liu,et al.  Valve-based consecutive bioprinting method for multimaterial tissue-like constructs with controllable interfaces , 2021, Biofabrication.

[23]  Daniel J. Shiwarski,et al.  3D Bioprinting using UNIversal Orthogonal Network (UNION) Bioinks , 2020, Advanced functional materials.

[24]  Y. S. Zhang,et al.  Symbiotic Photosynthetic Oxygenation within 3D-Bioprinted Vascularized Tissues. , 2020, Matter.

[25]  Y. S. Zhang,et al.  Composite Inks for Extrusion Printing of Biological and Biomedical Constructs. , 2020, ACS biomaterials science & engineering.

[26]  Robert H. Utama,et al.  Mechanical Mapping of Bioprinted Hydrogel Models by Brillouin Microscopy , 2020, bioRxiv.

[27]  J. Burdick,et al.  3D bioprinting of high cell-density heterogeneous tissue models through spheroid fusion within self-healing hydrogels , 2020, Nature Communications.

[28]  W. Świȩszkowski,et al.  Multimaterial bioprinting and combination of processing techniques towards the fabrication of biomimetic tissues and organs , 2021, Biofabrication.

[29]  D. Cho,et al.  Construction of a Novel In Vitro Atherosclerotic Model from Geometry‐Tunable Artery Equivalents Engineered via In‐Bath Coaxial Cell Printing , 2020, Advanced Functional Materials.

[30]  C. Stefanini,et al.  An overview of extrusion-based bioprinting with a focus on induced shear stress and its effect on cell viability , 2020 .

[31]  Alice E. Chen,et al.  Cellular extrusion bioprinting improves kidney organoid reproducibility and conformation. , 2020, Nature Materials.

[32]  A. Abate,et al.  High‐Definition Single‐Cell Printing: Cell‐by‐Cell Fabrication of Biological Structures , 2020, Advanced materials.

[33]  Mario Chopin-Doroteo,et al.  Tailoring of the rheological properties of bioinks to improve bioprinting and bioassembly for tissue replacement. , 2020, Biochimica et biophysica acta. General subjects.

[34]  Michael C. McAlpine,et al.  3D-printed multifunctional materials enabled by artificial-intelligence-assisted fabrication technologies , 2020, Nature Reviews Materials.

[35]  Michael C. McAlpine,et al.  3D printed self-supporting elastomeric structures for multifunctional microfluidics , 2020, Science Advances.

[36]  Vahid Serpooshan,et al.  Bioprintability: Physiomechanical and Biological Requirements of Materials for 3D Bioprinting Processes , 2020, Polymers.

[37]  Yanju Liu,et al.  A Review of Shape Memory Polymers and Composites: Mechanisms, Materials, and Applications , 2020, Advanced materials.

[38]  Martin L. Tomov,et al.  Embedded 3D Bioprinting of Gelatin Methacryloyl-Based Constructs with Highly Tunable Structural Fidelity. , 2020, ACS applied materials & interfaces.

[39]  M. Lutolf,et al.  Recapitulating macro-scale tissue self-organization through organoid bioprinting , 2020, Nature Materials.

[40]  Y. S. Zhang,et al.  Bioprinted Injectable Hierarchically Porous Gelatin Methacryloyl Hydrogel Constructs with Shape‐Memory Properties , 2020, Advanced functional materials.

[41]  Liliang Ouyang,et al.  Expanding and optimizing 3D bioprinting capabilities using complementary network bioinks , 2020, Science Advances.

[42]  L. Mongeau,et al.  Triggered micropore-forming bioprinting of porous viscoelastic hydrogels. , 2020, Materials horizons.

[43]  S. Maharjan,et al.  An open-source handheld extruder loaded with pore-forming bioink for in situ wound dressing , 2020, Materials today. Bio.

[44]  Tao Xu,et al.  Preliminary engineering for in situ in vivo bioprinting: a novel micro bioprinting platform for in situ in vivo bioprinting at a gastric wound site , 2020, Biofabrication.

[45]  J. Malda,et al.  Melt electrowriting onto anatomically relevant biodegradable substrates: Resurfacing a diarthrodial joint , 2020, Materials & design.

[46]  Michael C. McAlpine,et al.  3D printed patient-specific aortic root models with internal sensors for minimally invasive applications , 2020, Science Advances.

[47]  D. Kelly,et al.  3D bioprinting spatiotemporally defined patterns of growth factors to tightly control tissue regeneration , 2020, Science Advances.

[48]  Ali Khademhosseini,et al.  Crosslinking Strategies for 3D Bioprinting of Polymeric Hydrogels. , 2020, Small.

[49]  B. Fabry,et al.  Flow and hydrodynamic shear stress inside a printing needle during biofabrication , 2020, PloS one.

[50]  M. Zenobi‐Wong,et al.  3D Bioprinting of Macroporous Materials Based on Entangled Hydrogel Microstrands , 2020, Advanced science.

[51]  Yu Shrike Zhang,et al.  Improving Bioprinted Volumetric Tumor Microenvironments In Vitro. , 2020, Trends in cancer.

[52]  W. Yeong,et al.  Engineering macroscale cell alignment through coordinated toolpath design using support-assisted 3D bioprinting , 2020, Journal of the Royal Society Interface.

[53]  Alex J. Hughes,et al.  Guiding Cell Network Assembly using Shape‐Morphing Hydrogels , 2020, Advanced materials.

[54]  S. Ahadian,et al.  3D Bioprinting of Oxygenated Cell‐Laden Gelatin Methacryloyl Constructs , 2020, Advanced healthcare materials.

[55]  Alexander Pasko,et al.  Software for Bioprinting , 2020, International journal of bioprinting.

[56]  Eamon J. Sheehy,et al.  3D printing of fiber-reinforced cartilaginous templates for the regeneration of osteochondral defects. , 2020, Acta biomaterialia.

[57]  A. Boccaccini,et al.  3D printed oxidized alginate-gelatin bioink provides guidance for C2C12 muscle precursor cell orientation and differentiation via shear stress during bioprinting , 2020, Biofabrication.

[58]  Y. S. Zhang,et al.  3D bioprinting of glioblastoma models. , 2020, Journal of 3D printing in medicine.

[59]  Zhijie Zhu,et al.  3D printed deformable sensors , 2020, Science Advances.

[60]  Ibrahim T. Ozbolat,et al.  Intraoperative Bioprinting: Repairing Tissues and Organs in a Surgical Setting. , 2020, Trends in biotechnology.

[61]  Ali Khademhosseini,et al.  Direct-write 3D printing and characterization of a GelMA-based biomaterial for intracorporeal tissue engineering , 2020, Biofabrication.

[62]  Gordon G Wallace,et al.  Multitechnology Biofabrication: A New Approach for the Manufacturing of Functional Tissue Structures? , 2020, Trends in biotechnology.

[63]  Wei Sun,et al.  Three-dimensional bioprinted hepatorganoids prolong survival of mice with liver failure , 2020, Gut.

[64]  A. Lode,et al.  3D Bioprinting of osteochondral tissue substitutes – in vitro-chondrogenesis in multi-layered mineralized constructs , 2020, Scientific Reports.

[65]  Y. S. Zhang,et al.  Faithful Fabrication of Biocompatible Multicompartmental Memomicrospheres for Digitally Color-Tunable Barcoding. , 2020, Small.

[66]  Michael H. Durham,et al.  Advances in Extrusion 3D Bioprinting: A Focus on Multicomponent Hydrogel‐Based Bioinks , 2020, Advanced healthcare materials.

[67]  Lorenzo Moroni,et al.  Bio-Fabrication: Convergence of 3D Bioprinting and Nano-Biomaterials in Tissue Engineering and Regenerative Medicine , 2020, Frontiers in Bioengineering and Biotechnology.

[68]  Yu Shrike Zhang,et al.  Investigating Lymphangiogenesis in a Sacrificially Bioprinted Volumetric Model of Breast Tumor Tissue. , 2020, Methods.

[69]  Seung Ja Oh,et al.  Machine learning-based design strategy for 3D printable bioink: elastic modulus and yield stress determine printability , 2020, Biofabrication.

[70]  Xuanhe Zhao,et al.  Designing complex architectured materials with generative adversarial networks , 2020, Science Advances.

[71]  Michael C. McAlpine,et al.  In Situ Expansion, Differentiation, and Electromechanical Coupling of Human Cardiac Muscle in a 3D Bioprinted, Chambered Organoid , 2020, Circulation research.

[72]  Juan F Yee-de León,et al.  Using chaotic advection for facile high-throughput fabrication of ordered multilayer micro- and nanostructures: continuous chaotic printing , 2020, Biofabrication.

[73]  T. Kawai,et al.  DICOM segmentation and STL creation for 3D printing: a process and software package comparison for osseous anatomy , 2020, 3D Printing in Medicine.

[74]  Y. S. Zhang,et al.  Complexation-induced resolution enhancement of 3D-printed hydrogel constructs , 2020, Nature Communications.

[75]  Ibrahim T. Ozbolat,et al.  Aspiration-assisted bioprinting for precise positioning of biologics , 2020, Science Advances.

[76]  Lorenzo Moroni,et al.  Dynamic Bioinks to Advance Bioprinting , 2020, Advanced healthcare materials.

[77]  J. Shim,et al.  Bioprinting of Multiscaled Hepatic Lobules within a Highly Vascularized Construct. , 2020, Small.

[78]  A. Lode,et al.  Engineering considerations on extrusion-based bioprinting: interactions of material behavior, mechanical forces and cells in the printing needle , 2020, Biofabrication.

[79]  Jie Cao,et al.  Cell‐Inspired All‐Aqueous Microfluidics: From Intracellular Liquid–Liquid Phase Separation toward Advanced Biomaterials , 2020, Advanced science.

[80]  J. Malda,et al.  From Shape to Function: The Next Step in Bioprinting , 2020, Advanced materials.

[81]  Sahar Salehi,et al.  In Situ Printing of Adhesive Hydrogel Scaffolds for the Treatment of Skeletal Muscle Injuries. , 2020, ACS applied bio materials.

[82]  Lan Li,et al.  Application of robotic-assisted in situ 3D printing in cartilage regeneration with HAMA hydrogel: An in vivo study , 2020, Journal of advanced research.

[83]  Jingchao Jiang,et al.  A Perspective on Using Machine Learning in 3D Bioprinting , 2020, International journal of bioprinting.

[84]  Ferry P W Melchels,et al.  3D Printing in Suspension Baths: Keeping the Promises of Bioprinting Afloat. , 2020, Trends in biotechnology.

[85]  Ashley M. Compaan,et al.  Cross-linkable Microgel Composite Matrix Bath for Embedded Bioprinting of Perfusable Tissue Constructs and Sculpting of Solid Objects. , 2020, ACS applied materials & interfaces.

[86]  T. Mirabella,et al.  3D-printed vascular networks direct therapeutic angiogenesis in ischaemia , 2017, Nature Biomedical Engineering.

[87]  Yong He,et al.  Synchronous 3D Bioprinting of Large‐Scale Cell‐Laden Constructs with Nutrient Networks , 2019, Advanced healthcare materials.

[88]  Boyang Zhang,et al.  New Frontiers for Biofabrication and Bioreactor Design in Microphysiological System Development. , 2019, Trends in biotechnology.

[89]  Ho Cheung Shum,et al.  Emerging aqueous two-phase systems: from fundamentals of interfaces to biomedical applications. , 2019, Chemical Society reviews.

[90]  Paolo De Coppi,et al.  Opportunities and challenges of translational 3D bioprinting , 2019, Nature Biomedical Engineering.

[91]  Mark A. Skylar-Scott,et al.  Voxelated soft matter via multimaterial multinozzle 3D printing , 2019, Nature.

[92]  Soyoung Hong,et al.  Coaxial bioprinting of cell-laden vascular constructs using a gelatin-tyramine bioink. , 2019, Biomaterials science.

[93]  Zhou Liu,et al.  Freeform, Reconfigurable Embedded Printing of All‐Aqueous 3D Architectures , 2019, Advanced materials.

[94]  J. Hyun,et al.  Solid matrix-assisted printing for three-dimensional structuring of a viscoelastic medium surface , 2019, Nature Communications.

[95]  Eben Alsberg,et al.  Individual cell-only bioink and photocurable supporting medium for 3D printing and generation of engineered tissues with complex geometries. , 2019, Materials horizons.

[96]  P. Datta,et al.  Anisotropy Properties of Tissues: A Basis for Fabrication of Biomimetic Anisotropic Scaffolds for Tissue Engineering , 2019, Journal of Bionic Engineering.

[97]  Sebastien G M Uzel,et al.  Biomanufacturing of organ-specific tissues with high cellular density and embedded vascular channels , 2019, Science Advances.

[98]  Y. S. Zhang,et al.  Coaxial Extrusion of Tubular Tissue Constructs Using a Gelatin/GelMA Blend Bioink. , 2019, ACS biomaterials science & engineering.

[99]  Y. S. Zhang,et al.  Hydrogel Bioink with Multilayered Interfaces Improves Dispersibility of Encapsulated Cells in Extrusion Bioprinting. , 2019, ACS applied materials & interfaces.

[100]  P. G. Campbell,et al.  3D bioprinting of collagen to rebuild components of the human heart , 2019, Science.

[101]  W. Świȩszkowski,et al.  3D bioprinting of hydrogel constructs with cell and material gradients for the regeneration of full-thickness chondral defect using a microfluidic printing head , 2019, Biofabrication.

[102]  M. Lutolf,et al.  Engineering Stem Cell Self-organization to Build Better Organoids. , 2019, Cell stem cell.

[103]  A. Feinberg,et al.  Cryopreserved cell-laden alginate microgel bioink for 3D bioprinting of living tissues. , 2019, Materials today. Chemistry.

[104]  Y. S. Zhang,et al.  Effective bioprinting resolution in tissue model fabrication. , 2019, Lab on a chip.

[105]  Y. S. Zhang,et al.  Sacrificial Bioprinting of a Mammary Ductal Carcinoma Model. , 2019, Biotechnology journal.

[106]  S. Van Vlierberghe,et al.  Additive manufacturing of photo-crosslinked gelatin scaffolds for adipose tissue engineering. , 2019, Acta biomaterialia.

[107]  Xiongbiao Chen,et al.  Printability and Cell Viability in Bioprinting Alginate Dialdehyde-Gelatin Scaffolds. , 2019, ACS biomaterials science & engineering.

[108]  W. Świȩszkowski,et al.  3D bioprinted hydrogel model incorporating β-tricalcium phosphate for calcified cartilage tissue engineering , 2019, Biofabrication.

[109]  Y. S. Zhang,et al.  A Tumor‐on‐a‐Chip System with Bioprinted Blood and Lymphatic Vessel Pair , 2019, Advanced functional materials.

[110]  Ning Hu,et al.  3D Bioprinting: from Benches to Translational Applications. , 2019, Small.

[111]  S. Shackelford,et al.  Outcomes of traumatic hemorrhagic shock and the epidemiology of preventable death from injury , 2019, Transfusion.

[112]  Jacqueline Kort-Mascort,et al.  Extrusion bioprinting of soft materials: An emerging technique for biological model fabrication , 2019, Applied Physics Reviews.

[113]  Wai Yee Yeong,et al.  Resolution and shape in bioprinting: Strategizing towards complex tissue and organ printing , 2019, Applied Physics Reviews.

[114]  Sanlin S. Robinson,et al.  Renal reabsorption in 3D vascularized proximal tubule models , 2019, Proceedings of the National Academy of Sciences.

[115]  Dong-Woo Cho,et al.  Recent Strategies in Extrusion-Based Three-Dimensional Cell Printing toward Organ Biofabrication. , 2019, ACS biomaterials science & engineering.

[116]  C. Highley,et al.  Jammed Microgel Inks for 3D Printing Applications , 2018, Advanced science.

[117]  J. Malda,et al.  Simultaneous Micropatterning of Fibrous Meshes and Bioinks for the Fabrication of Living Tissue Constructs , 2018, Advanced healthcare materials.

[118]  Ke Li,et al.  Programmable and printable Bacillus subtilis biofilms as engineered living materials , 2018, Nature Chemical Biology.

[119]  M Gelinsky,et al.  A definition of bioinks and their distinction from biomaterial inks , 2018, Biofabrication.

[120]  Y. S. Zhang,et al.  Three-dimensional bioprinting of gelatin methacryloyl (GelMA) , 2018, Bio-Design and Manufacturing.

[121]  Wojciech Święszkowski,et al.  Co-axial wet-spinning in 3D bioprinting: state of the art and future perspective of microfluidic integration , 2018, Biofabrication.

[122]  Shabir Hassan,et al.  Aqueous Two‐Phase Emulsion Bioink‐Enabled 3D Bioprinting of Porous Hydrogels , 2018, Advanced materials.

[123]  Christoph Fahrenson,et al.  Optimization of cell-laden bioinks for 3D bioprinting and efficient infection with influenza A virus , 2018, Scientific Reports.

[124]  Roberto Parra-Saldivar,et al.  Digitally Tunable Microfluidic Bioprinting of Multilayered Cannular Tissues , 2018, Advanced materials.

[125]  G. Wallace,et al.  Biofabrication of human articular cartilage: a path towards the development of a clinical treatment , 2018, Biofabrication.

[126]  David Eglin,et al.  Three-Dimensional Printing of a Tyramine Hyaluronan Derivative with Double Gelation Mechanism for Independent Tuning of Shear Thinning and Postprinting Curing. , 2018, ACS biomaterials science & engineering.

[127]  Anthony Atala,et al.  Optimization of gelatin–alginate composite bioink printability using rheological parameters: a systematic approach , 2018, Biofabrication.

[128]  Yu Shrike Zhang,et al.  A General Strategy for Extrusion Bioprinting of Bio-Macromolecular Bioinks through Alginate-Templated Dual-Stage Crosslinking. , 2018, Macromolecular bioscience.

[129]  Andreas Mark,et al.  Simulations of 3D bioprinting: predicting bioprintability of nanofibrillar inks , 2018, Biofabrication.

[130]  Michael C. McAlpine,et al.  3D Printed Functional and Biological Materials on Moving Freeform Surfaces , 2018, Advanced materials.

[131]  Navid Hakimi,et al.  Handheld skin printer: in situ formation of planar biomaterials and tissues. , 2018, Lab on a chip.

[132]  Ahmed Hosny,et al.  Making data matter: Voxel printing for the digital fabrication of data across scales and domains , 2018, Science Advances.

[133]  Neel S. Joshi,et al.  Engineered Living Materials: Prospects and Challenges for Using Biological Systems to Direct the Assembly of Smart Materials , 2018, Advanced materials.

[134]  V. Pillay,et al.  A 3D bioprinted in situ conjugated-co-fabricated scaffold for potential bone tissue engineering applications. , 2018, Journal of Biomedical Materials Research. Part A.

[135]  Ali Khademhosseini,et al.  Bioinks for 3D bioprinting: an overview. , 2018, Biomaterials science.

[136]  Lorenzo Moroni,et al.  Biofabrication strategies for 3D in vitro models and regenerative medicine , 2018, Nature Reviews Materials.

[137]  Jessica Nulty,et al.  3D printed microchannel networks to direct vascularisation during endochondral bone repair. , 2018, Biomaterials.

[138]  Yu Shrike Zhang,et al.  Embedded Multimaterial Extrusion Bioprinting , 2018, SLAS technology.

[139]  Kelsey N. Retting,et al.  Bioprinted 3D Primary Human Intestinal Tissues Model Aspects of Native Physiology and ADME/Tox Functions , 2018, iScience.

[140]  Anthony Atala,et al.  Microphysiological Systems: automated fabrication via extrusion bioprinting , 2018 .

[141]  Zichen Zhao,et al.  3D Printed Organ Models with Physical Properties of Tissue and Integrated Sensors , 2018, Advanced materials technologies.

[142]  Peter Pivonka,et al.  In situ handheld three‐dimensional bioprinting for cartilage regeneration , 2018, Journal of tissue engineering and regenerative medicine.

[143]  Akhilesh K Gaharwar,et al.  Nanoengineered Ionic-Covalent Entanglement (NICE) Bioinks for 3D Bioprinting. , 2018, ACS applied materials & interfaces.

[144]  Xingchen Yang,et al.  Collagen-alginate as bioink for three-dimensional (3D) cell printing based cartilage tissue engineering. , 2018, Materials science & engineering. C, Materials for biological applications.

[145]  Ali Khademhosseini,et al.  Coaxial extrusion bioprinting of 3D microfibrous constructs with cell-favorable gelatin methacryloyl microenvironments , 2018, Biofabrication.

[146]  Qing Li,et al.  Biofabrication: A Guide to Technology and Terminology. , 2017, Trends in biotechnology.

[147]  Scott A. Wilson,et al.  Shear-Thinning and Thermo-Reversible Nanoengineered Inks for 3D Bioprinting. , 2017, ACS applied materials & interfaces.

[148]  Manuel Schaffner,et al.  3D printing of bacteria into functional complex materials , 2017, Science Advances.

[149]  J Malda,et al.  Assessing bioink shape fidelity to aid material development in 3D bioprinting , 2017, Biofabrication.

[150]  Tim B. F. Woodfield,et al.  Thiol–Ene Clickable Gelatin: A Platform Bioink for Multiple 3D Biofabrication Technologies , 2017, Advanced materials.

[151]  Y. S. Zhang,et al.  Structural analysis of photocrosslinkable methacryloyl-modified protein derivatives. , 2017, Biomaterials.

[152]  Ali Khademhosseini,et al.  Bioprinted 3D vascularized tissue model for drug toxicity analysis. , 2017, Biomicrofluidics.

[153]  Peter Pivonka,et al.  Handheld Co-Axial Bioprinting: Application to in situ surgical cartilage repair , 2017, Scientific Reports.

[154]  W. Świȩszkowski,et al.  Microfluidic-enhanced 3D bioprinting of aligned myoblast-laden hydrogels leads to functionally organized myofibers in vitro and in vivo. , 2017, Biomaterials.

[155]  Pekka Pursula,et al.  3D-Printable Bioactivated Nanocellulose-Alginate Hydrogels. , 2017, ACS applied materials & interfaces.

[156]  Ali Khademhosseini,et al.  Extrusion Bioprinting of Shear‐Thinning Gelatin Methacryloyl Bioinks , 2017, Advanced healthcare materials.

[157]  Stuart Kyle,et al.  ‘Printability' of Candidate Biomaterials for Extrusion Based 3D Printing: State‐of‐the‐Art , 2017, Advanced healthcare materials.

[158]  Ali Khademhosseini,et al.  Advances in engineering hydrogels , 2017, Science.

[159]  Hans Clevers,et al.  Converging biofabrication and organoid technologies: the next frontier in hepatic and intestinal tissue engineering? , 2017, Biofabrication.

[160]  Ibrahim T. Ozbolat,et al.  The bioink: A comprehensive review on bioprintable materials. , 2017, Biotechnology advances.

[161]  Liliang Ouyang,et al.  A Generalizable Strategy for the 3D Bioprinting of Hydrogels from Nonviscous Photo‐crosslinkable Inks , 2017, Advanced materials.

[162]  Koichi Nakayama,et al.  Principles of the Kenzan Method for Robotic Cell Spheroid-Based Three-Dimensional Bioprinting. , 2016, Tissue engineering. Part B, Reviews.

[163]  Marcel A. Heinrich,et al.  Rapid Continuous Multimaterial Extrusion Bioprinting , 2017, Advanced materials.

[164]  Marco Rasponi,et al.  Bioprinting 3D microfibrous scaffolds for engineering endothelialized myocardium and heart-on-a-chip. , 2016, Biomaterials.

[165]  Ali Khademhosseini,et al.  4D bioprinting: the next-generation technology for biofabrication enabled by stimuli-responsive materials , 2016, Biofabrication.

[166]  Wai Yee Yeong,et al.  Design and Printing Strategies in 3D Bioprinting of Cell‐Hydrogels: A Review , 2016, Advanced healthcare materials.

[167]  Ali Khademhosseini,et al.  Direct 3D bioprinting of perfusable vascular constructs using a blend bioink. , 2016, Biomaterials.

[168]  Kimberly A. Homan,et al.  Bioprinting of 3D Convoluted Renal Proximal Tubules on Perfusable Chips , 2016, Scientific Reports.

[169]  S. Shin,et al.  Cold Water Fish Gelatin Methacryloyl Hydrogel for Tissue Engineering Application , 2016, PloS one.

[170]  S. Van Vlierberghe,et al.  Bioink properties before, during and after 3D bioprinting , 2016, Biofabrication.

[171]  Wei Sun,et al.  Effect of bioink properties on printability and cell viability for 3D bioplotting of embryonic stem cells , 2016, Biofabrication.

[172]  Feng Xu,et al.  4D Bioprinting for Biomedical Applications. , 2016, Trends in biotechnology.

[173]  Ibrahim T. Ozbolat,et al.  Bioprinting towards Physiologically Relevant Tissue Models for Pharmaceutics. , 2016, Trends in biotechnology.

[174]  Cynthia A. Reinhart-King,et al.  3D Bioprinting of Spatially Heterogeneous Collagen Constructs for Cartilage Tissue Engineering. , 2016, ACS biomaterials science & engineering.

[175]  Ibrahim T. Ozbolat,et al.  Three-dimensional bioprinting using self-assembling scalable scaffold-free “tissue strands” as a new bioink , 2016, Scientific Reports.

[176]  Ali Khademhosseini,et al.  A Bioactive Carbon Nanotube‐Based Ink for Printing 2D and 3D Flexible Electronics , 2016, Advanced materials.

[177]  Elisabetta A. Matsumoto,et al.  Biomimetic 4D printing. , 2016, Nature materials.

[178]  Dong-Woo Cho,et al.  Tailoring mechanical properties of decellularized extracellular matrix bioink by vitamin B2-induced photo-crosslinking. , 2016, Acta biomaterialia.

[179]  Mark A. Skylar-Scott,et al.  Three-dimensional bioprinting of thick vascularized tissues , 2016, Proceedings of the National Academy of Sciences.

[180]  Ling Wang,et al.  Automated quantitative assessment of three-dimensional bioprinted hydrogel scaffolds using optical coherence tomography. , 2016, Biomedical optics express.

[181]  James J. Yoo,et al.  A 3D bioprinting system to produce human-scale tissue constructs with structural integrity , 2016, Nature Biotechnology.

[182]  Horst Fischer,et al.  Controlling Shear Stress in 3D Bioprinting is a Key Factor to Balance Printing Resolution and Stem Cell Integrity , 2016, Advanced healthcare materials.

[183]  Nupura S. Bhise,et al.  A liver-on-a-chip platform with bioprinted hepatic spheroids , 2016, Biofabrication.

[184]  Dong-Woo Cho,et al.  Biofabrication: reappraising the definition of an evolving field , 2016, Biofabrication.

[185]  Chee Kai Chua,et al.  A Perspective on 4D Bioprinting , 2016 .

[186]  Ibrahim T. Ozbolat,et al.  Current advances and future perspectives in extrusion-based bioprinting. , 2016, Biomaterials.

[187]  A. Khademhosseini,et al.  Microfluidic Bioprinting of Heterogeneous 3D Tissue Constructs Using Low‐Viscosity Bioink , 2016, Advanced materials.

[188]  D. L. Taylor,et al.  The Microphysiology Systems Database for Analyzing and Modeling Compound Interactions with Human and Animal Organ Models. , 2016, Applied in vitro toxicology.

[189]  Aleksandr Ovsianikov,et al.  Development of the Biopen : a handheld device for surgical printing of adipose stem cells at a chondral wound site , 2016 .

[190]  D. Kenkel,et al.  Bioprinting Complex Cartilaginous Structures with Clinically Compliant Biomaterials , 2015 .

[191]  F. Rybicki,et al.  Medical 3D Printing for the Radiologist. , 2015, Radiographics : a review publication of the Radiological Society of North America, Inc.

[192]  Joon Hyung Park,et al.  Three-dimensional printing of complex biological structures by freeform reversible embedding of suspended hydrogels , 2015, Science Advances.

[193]  Anthony Atala,et al.  A hydrogel bioink toolkit for mimicking native tissue biochemical and mechanical properties in bioprinted tissue constructs. , 2015, Acta biomaterialia.

[194]  Thomas J Ober,et al.  Active mixing of complex fluids at the microscale , 2015, Proceedings of the National Academy of Sciences.

[195]  C. Highley,et al.  Direct 3D Printing of Shear‐Thinning Hydrogels into Self‐Healing Hydrogels , 2015, Advanced materials.

[196]  Tapomoy Bhattacharjee,et al.  Writing in the granular gel medium , 2015, Science Advances.

[197]  Liang Ma,et al.  Coaxial nozzle-assisted 3D bioprinting with built-in microchannels for nutrients delivery. , 2015, Biomaterials.

[198]  Wojciech Matusik,et al.  MultiFab , 2015, ACM Trans. Graph..

[199]  Thomas J Ober,et al.  Microfluidic Printheads for Multimaterial 3D Printing of Viscoelastic Inks , 2015, Advanced materials.

[200]  P. Gatenholm,et al.  3D Bioprinting Human Chondrocytes with Nanocellulose-Alginate Bioink for Cartilage Tissue Engineering Applications. , 2015, Biomacromolecules.

[201]  Dongsheng Liu,et al.  Rapid formation of a supramolecular polypeptide-DNA hydrogel for in situ three-dimensional multilayer bioprinting. , 2015, Angewandte Chemie.

[202]  Thomas Bley,et al.  Green bioprinting: Fabrication of photosynthetic algae‐laden hydrogel scaffolds for biotechnological and medical applications , 2015 .

[203]  Ibrahim T. Ozbolat,et al.  In Vitro Study of Directly Bioprinted Perfusable Vasculature Conduits. , 2015, Biomaterials science.

[204]  A. Atala,et al.  Biomaterials for Integration with 3-D Bioprinting , 2015, Annals of Biomedical Engineering.

[205]  Marco Costantini,et al.  Rapid prototyping of chitosan-coated alginate scaffolds through the use of a 3D fiber deposition technique. , 2014, Journal of materials chemistry. B.

[206]  S. Yoo,et al.  Creating perfused functional vascular channels using 3D bio-printing technology. , 2014, Biomaterials.

[207]  Anthony Atala,et al.  3D bioprinting of tissues and organs , 2014, Nature Biotechnology.

[208]  A. Khademhosseini,et al.  Hydrogel bioprinted microchannel networks for vascularization of tissue engineering constructs. , 2014, Lab on a chip.

[209]  J. Lewis,et al.  3D Bioprinting of Vascularized, Heterogeneous Cell‐Laden Tissue Constructs , 2014, Advanced materials.

[210]  Skylar Tibbits,et al.  4D Printing: Multi‐Material Shape Change , 2014 .

[211]  Wim E Hennink,et al.  25th Anniversary Article: Engineering Hydrogels for Biofabrication , 2013, Advanced materials.

[212]  Shoji Takeuchi,et al.  Metre-long cell-laden microfibres exhibit tissue morphologies and functions. , 2013, Nature materials.

[213]  Ibrahim T. Ozbolat,et al.  Direct Bioprinting of Vessel-Like Tubular Microfluidic Channels , 2013 .

[214]  B. Duan,et al.  3D bioprinting of heterogeneous aortic valve conduits with alginate/gelatin hydrogels. , 2013, Journal of biomedical materials research. Part A.

[215]  John J. Vericella,et al.  High‐Throughput Printing via Microvascular Multinozzle Arrays , 2013, Advanced materials.

[216]  Shoji Takeuchi,et al.  Cell Origami: Self-Folding of Three-Dimensional Cell-Laden Microstructures Driven by Cell Traction Force , 2012, PloS one.

[217]  Ali Khademhosseini,et al.  Gelatin methacrylate as a promising hydrogel for 3D microscale organization and proliferation of dielectrophoretically patterned cells. , 2012, Lab on a chip.

[218]  D. Cho,et al.  Bioprinting of a mechanically enhanced three-dimensional dual cell-laden construct for osteochondral tissue engineering using a multi-head tissue/organ building system , 2012 .

[219]  Murat Guvendiren,et al.  Shear-thinning hydrogels for biomedical applications , 2012 .

[220]  Brendon M. Baker,et al.  Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues , 2012 .

[221]  Ali Khademhosseini,et al.  Digitally tunable physicochemical coding of material composition and topography in continuous microfibres. , 2011, Nature materials.

[222]  J. Lewis,et al.  Omnidirectional Printing of 3D Microvascular Networks , 2011, Advanced materials.

[223]  J Malda,et al.  Bioprinting of hybrid tissue constructs with tailorable mechanical properties , 2011, Biofabrication.

[224]  Xin Cai,et al.  Chronic label-free volumetric photoacoustic microscopy of melanoma cells in three-dimensional porous scaffolds. , 2010, Biomaterials.

[225]  A. Khademhosseini,et al.  Cell-laden microengineered gelatin methacrylate hydrogels. , 2010, Biomaterials.

[226]  Vladimir Mironov,et al.  Bioprinting is coming of age: report from the International Conference on Bioprinting and Biofabrication in Bordeaux (3B'09) , 2010, Biofabrication.

[227]  L. Niklason,et al.  Scaffold-free vascular tissue engineering using bioprinting. , 2009, Biomaterials.

[228]  Vladimir Mironov,et al.  Organ printing: tissue spheroids as building blocks. , 2009, Biomaterials.

[229]  Tobias Schmelzle,et al.  Engineering tumors with 3D scaffolds , 2007, Nature Methods.

[230]  R. Landers,et al.  Rapid prototyping of scaffolds derived from thermoreversible hydrogels and tailored for applications in tissue engineering. , 2002, Biomaterials.

[231]  A. Lendlein,et al.  Shape-memory polymers , 2002 .