A Methodology for Robust Load Reduction in Wind Turbine Blades Using Flow Control Devices

Decades of wind turbine research, development and installation have demonstrated reductions in levelized cost of energy (LCOE) resulting from turbines with larger rotor diameters and increased hub heights. Further reductions in LCOE by up-scaling turbine size can be challenged by practical limitations such as the square-cube law: where the power scales with the square of the blade length and the added mass scales with the volume (the cube). Active blade load control can disrupt this trend, allowing longer blades with less mass. This paper presents the details of the development of a robust load control system to reduce blade fatigue loads. The control system, which we coined sectional lift control or SLC, uses a lift actuator model to emulate an active flow control device. The main contributions of this paper are: (1) Methodology for SLC design to reduce dynamic blade root moments in a neighborhood of the rotor angular frequency (1P). (2) Analysis and numerical evidence supporting the use of a single robust SLC for all wind speeds, without the need for scheduling on wind speed or readily available measurements such as collective pitch or generator angular speed. (3) Intuition and numerical evidence to demonstrate that the SLC and the turbine controller do not interact. (4) Evaluation of the SLC using a full suite of fatigue and turbine performance metrics.

[1]  M. Rotea,et al.  Design of a 3.4‐MW wind turbine with integrated plasma actuator‐based load control , 2021, Wind Energy.

[2]  Mario A. Rotea,et al.  Active Structural Control of Offshore Wind Turbines , 2010 .

[3]  Neal E. Fine,et al.  The Development and Demonstration of a Plasma Flow Control System on a 20 kW Wind Turbine , 2016 .

[4]  Active Aerodynamic Load Control for Improved Wind Turbine Design , 2020 .

[5]  B. Jonkman,et al.  TurbSim User's Guide , 2005 .

[6]  Torben J. Larsen,et al.  Active load reduction using individual pitch, based on local blade flow measurements , 2005 .

[7]  G.A.M. van Kuik,et al.  Review of state of the art in smart rotor control research for wind turbines , 2010 .

[8]  William Leithead,et al.  Combined wind turbine fatigue and ultimate load reduction by individual blade control , 2014 .

[9]  G. Bir.  Multi-Blade Coordinate Transformation and its Application to Wind Turbine Analysis , 2008 .

[10]  Matthew A. Lackner,et al.  A comparison of smart rotor control approaches using trailing edge flaps and individual pitch control , 2009 .

[11]  Ervin Bossanyi,et al.  Wind Energy Handbook , 2001 .

[12]  Niels Kjølstad Poulsen,et al.  Full‐scale test of trailing edge flaps on a Vestas V27 wind turbine: active load reduction and system identification , 2014 .

[13]  G.A.M. van Kuik,et al.  Model predictive control for wind turbines with distributed active flaps: incorporating inflow signals and actuator constraints , 2012 .

[14]  Wolf Fichtner,et al.  Key challenges and prospects for large wind turbines , 2016 .

[15]  Ian Postlethwaite,et al.  Multivariable Feedback Control: Analysis and Design , 1996 .

[16]  Alan Wright,et al.  Adding feedforward blade pitch control to standard feedback controllers for load mitigation in wind turbines , 2011 .

[17]  J. Doyle,et al.  Essentials of Robust Control , 1997 .

[18]  David Schlipf,et al.  Nonlinear model predictive control of wind turbines using LIDAR , 2013 .

[19]  Keith Glover,et al.  A loop-shaping design procedure using H/sub infinity / synthesis , 1992 .

[20]  Ervin Bossanyi,et al.  Further load reductions with individual pitch control , 2005 .

[21]  B. Ll. Jones,et al.  Analysis and design of Coleman transform‐based individual pitch controllers for wind‐turbine load reduction , 2015 .

[22]  L. Sethuraman,et al.  IEA Wind TCP Task 37: Systems Engineering in Wind Energy - WP2.1 Reference Wind Turbines , 2019 .

[23]  Mario A. Rotea,et al.  Structural control of floating wind turbines , 2011 .

[24]  Scott J. Johnson,et al.  An overview of active load control techniques for wind turbines with an emphasis on microtabs , 2010 .

[25]  Mate Jelavić,et al.  MPC framework for constrained wind turbine individual pitch control , 2019, Wind Energy.

[26]  Ervin Bossanyi,et al.  Individual Blade Pitch Control for Load Reduction , 2003 .

[27]  W.E. Leithead,et al.  A novel approach to structural load control using intelligent actuators , 2009, 2009 17th Mediterranean Conference on Control and Automation.

[28]  Christian Bak,et al.  Deformable trailing edge flaps for modern megawatt wind turbine controllers using strain gauge sensors , 2010 .

[29]  Yaoyu Li,et al.  NREL Fast Modeling for Blade Load Control with Plasma Actuators , 2018, 2018 IEEE Conference on Control Technology and Applications (CCTA).

[30]  Abhineet Gupta,et al.  Multi-Sectional Lift Actuation for Wind Turbine Load Alleviation , 2020 .

[31]  Zhe Chen,et al.  Proportional resonant individual pitch control for mitigation of wind turbines loads , 2013 .

[32]  Martin Kühn,et al.  Smart rotor control of wind turbines under actuator limitations , 2019, 2019 American Control Conference (ACC).

[33]  Michel Verhaegen,et al.  Feedback–feedforward individual pitch control for wind turbine load reduction , 2009 .

[34]  William Leithead,et al.  Alleviation of unbalanced rotor loads by single blade controllers , 2009 .

[35]  Qian Lu,et al.  Fundamental performance similarities between individual pitch control strategies for wind turbines , 2017, Int. J. Control.

[36]  R. Digumarthi,et al.  Wind Shear and Turbulence Effects on Rotor Fatigue and Loads Control , 2003 .