Design and Simulation of a Micro-coiled Digitally-Controlled Variable Inductor with a Monolithically Integrated MEMS Switch

: This work introduces the design, analysis, simulation, and a standard MEMS fabrication process for a three-dimensional micro-coil with a magnetic core and a digital switch configuration using a completely integrated, fully MEMS-compatible process to achieve a digitally controlled inductance. The proposed design can also be utilized as a micro-transformer. The proposed design consists of five identical 3D coils and their corresponding MEMS switches. These coils are digitally controlled to achieve a variable inductor ranging from one-fifth of the coil inductance up to five times the coil inductance. A standard five-layer Polymumps process is proposed to fabricate the micro-coils and the integrated switches. Each micro coil is anchored directly on-chip, which is connected to the input signal from one side, and the other is connected to the switch. The Ni-based magnetic core improves the coil (cid:182)(cid:86)(cid:3) (cid:85)(cid:72)(cid:86)(cid:83)(cid:82)(cid:81)(cid:86)(cid:72)(cid:3) by confining and guiding the magnetic field in the magnetic device compared to Si core based by more than five times. The presented coil has the number of windings limited by the designed length and the minimum spacing that can be realized by standard optical lithography. The coil (cid:182)(cid:86) diameter is also restricted by the limits defined by optical lithography, whereas the maximum height realizable by the Polymumps process limits the height of the magnetic core and accordingly results in lower inductor performance. Based on this technique, we present coils ranging from 100 (cid:541) m length and ten winding up to 1000 (cid:541) m length and 100 windings. The new monolithically integrated MEMS switches act as selectors to achieve a variable inductance with digital control to allow the selection among n(n+1)/2 inductance steps, where n is the number of coils.

[1]  A. Elshurafa,et al.  Design analysis and simulation of a digital RF MEMS varactor with high capacitive ratio , 2022, Microsystem Technologies.

[2]  Hoa Thanh Le,et al.  MEMS inductor fabrication and emerging applications in power electronics and neurotechnologies , 2021, Microsystems & nanoengineering.

[3]  M. Woytasik,et al.  Reusable Embedded Microcoils for Magnetic Nano-Beads Trapping in Microfluidics: Magnetic Simulation and Experiments , 2020, Micromachines.

[4]  R. Hida,et al.  Ultra-Low Profile Integrated Magnetic Inductors and Transformers for HF Applications , 2019, IEEE Transactions on Magnetics.

[5]  Rama Komaragiri,et al.  Fabrication, characterization, and modelling of a novel via-less single metal level magnetic microcoil sensor for biosensing applications , 2019, Sensors and Actuators A: Physical.

[6]  Xue-cheng Sun,et al.  An innovative micro magnetic separator based on 3D micro-copper-coil exciting soft magnetic tips and FeNi wires for bio-target sorting , 2019, Microfluidics and Nanofluidics.

[7]  Sima Noghanian,et al.  A Literature Survey on Wireless Power Transfer for Biomedical Devices , 2018 .

[8]  T. Prodromakis,et al.  Magnetic stimulation in the microscale: the development of a 6 × 6 array of micro-coils for stimulation of excitable cells in vitro , 2018 .

[9]  Xue-cheng Sun,et al.  An integrated microfluidic system using a micro-fluxgate and micro spiral coil for magnetic microbeads trapping and detecting , 2017, Scientific Reports.

[10]  Vania Silverio,et al.  Challenges and trends in magnetic sensor integration with microfluidics for biomedical applications , 2017 .

[11]  Omer Faris Hikmat,et al.  RF MEMS Inductors and Their Applications—A Review , 2017, Journal of Microelectromechanical Systems.

[12]  Seung Woo Lee,et al.  Implantable microcoils for intracortical magnetic stimulation , 2016, Science Advances.

[13]  M. Allen,et al.  Anisotropic nanolaminated CoNiFe cores integrated into microinductors for high-frequency dc–dc power conversion , 2015 .

[14]  Mehdi Ghasemzadeh,et al.  An electrostatic tunable RF MEMS capacitor with improved quality factor , 2014, 2014 22nd Iranian Conference on Electrical Engineering (ICEE).

[15]  M. Allen,et al.  Microfabricated, ultra-dense, three-dimensional metal coils , 2009, TRANSDUCERS 2009 - 2009 International Solid-State Sensors, Actuators and Microsystems Conference.

[16]  M. Esashi,et al.  Process for the fabrication of hollow core solenoidal microcoils in borosilicate glass , 2008 .

[17]  I. Shimoyama,et al.  A Standing Micro Coil for a High Resolution MRI , 2007, TRANSDUCERS 2007 - 2007 International Solid-State Sensors, Actuators and Microsystems Conference.

[18]  J. Bird.  Electrical Circuit Theory and Technology , 2007 .

[19]  Radivoje Popovic,et al.  Microfabricated solenoids and Helmholtz coils for NMR spectroscopy of mammalian cells. , 2007, Lab on a chip.

[20]  I. Young,et al.  Batch fabrication of micro-coils for MR spectroscopy on silicon , 2005, IEEE Sensors, 2005..

[21]  V. T. Srikar,et al.  Materials selection in micromechanical design: an application of the Ashby approach , 2003 .

[22]  Nimit Chomnawang,et al.  On-chip 3D air-core microinductor for high-frequency applications using deformation of sacrificial polymer , 2001, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[23]  L. Ciobanu,et al.  Design and testing of high sensitivity microreceiver coil apparatus for nuclear magnetic resonance and imaging , 2001 .

[24]  Stephanus Büttgenbach,et al.  Microcoils and microrelays — an optimized multilayer fabrication process , 2000 .

[25]  Susan C. Mantell,et al.  Simulation and fabrication of piezoresistive membrane type MEMS strain sensors , 2000 .

[26]  G. Boero,et al.  An NMR magnetometer with planar microcoils and integrated electronics for signal detection and amplification , 1998 .

[27]  B. Löchel,et al.  Microcoils fabricated by UV depth lithography and galvanoplating , 1996 .

[28]  P C Lauterbur,et al.  Design and analysis of microcoils for NMR microscopy. , 1995, Journal of magnetic resonance. Series B.

[29]  W. Menz,et al.  Fully Batch Fabricated Magnetic Microactuators Using A Two Layer Liga Process , 1995, Proceedings of the International Solid-State Sensors and Actuators Conference - TRANSDUCERS '95.

[30]  M. Allen,et al.  A planar micromachined spiral inductor for integrated magnetic microactuator applications , 1993 .

[31]  Bahram Azizollah Ganji,et al.  Analytical Optimization of High Performance and High Quality Factor MEMS Spiral Inductor , 2014 .

[32]  M. T. Mustaffa,et al.  Evaluation and analysis of methods for fixed and variable MEMS inductors design , 2014 .

[33]  N. Anjum,et al.  Analysis of active resistors realized using CMOS technology , 2014 .

[34]  I. Shimoyama,et al.  A micro planar coil for local high resolution magnetic resonance imaging , 2007, 2007 IEEE 20th International Conference on Micro Electro Mechanical Systems (MEMS).

[35]  A. Niknejad,et al.  Analysis of eddy-current losses over conductive substrates with applications to monolithic inductors and transformers , 2001 .

[36]  Mehran Mehregany,et al.  Deposition and Characterization of In-Situ Boron Doped Polycrystalline Silicon Films for Microelectromechanical Systems Applications , 1999 .

[37]  Umesh Kumar,et al.  Analytical Study of Inductor Simulation Circuits , 1989 .