Traveling and abrasion characteristics of wheels for lunar exploration rover in vacuum

Abstract This paper investigates the traveling and abrasion characteristics of rigid wheels for a lunar exploration rover at atmospheric pressure and in a vacuum. For this investigation, a traveling test system that enables the wheel to continuously travel over a long distance was developed. Using this system, tests on traveling performance and abrasion were conducted with the wheel on a lunar regolith simulant surface. In the initial tests, various wheels traveled over different ground conditions and their performances were evaluated based on the relationship between the drawbar pull and slippage. In the later tests, a wheel with grousers traveled a distance of 3 km and the abrasion was analyzed at various intervals. From the traveling performance tests, it was found that for a soft ground condition, the traveling performance of the wheels in vacuum was slightly lower than that in atmosphere. This indicates that ground tests performed in atmosphere overestimate the actual performance on the lunar surface. The abrasion tests suggested that the scratching of wheels occurs more easily in vacuum than in atmosphere. These experiments confirmed that the abrasion of the wheels do not cause any critical problem for a traveling distance of up to 3 km in a simulated lunar environment.

[1]  Dale C. Ferguson,et al.  Evidence for Martian electrostatic charging and abrasive wheel wear from the Wheel Abrasion Experiment on the Pathfinder Sojourner rover , 1999 .

[2]  Genya Ishigami,et al.  Development of in-wheel sensor system for accurate measurement of wheel terrain interaction characteristics , 2015 .

[3]  Steven Dubowsky,et al.  Mobile Robots in Rough Terrain - Estimation, Motion Planning, and Control with Application to Planetary Rovers , 2004, Springer Tracts in Advanced Robotics.

[4]  Yoshinori Sato,et al.  Experimental Study for Rover Mobility on Lunar Simulant Terrain in Vacuum Condition , 2006 .

[5]  Sachiko Wakabayashi,et al.  Design and mobility evaluation of tracked lunar vehicle , 2009 .

[6]  Tetsuji Yoshida,et al.  Properties of Lunar Soil Simulant Manufactured in Japan , 1998 .

[7]  M. G. Bekker,et al.  Off-the-road locomotion , 1960 .

[8]  Julie Kleinhenz,et al.  ISRU Soil Mechanics Vacuum Facility: Soil Bin Preparation and Simulant Strength Characterization , 2012 .

[9]  Masatsugu Otsuki,et al.  Japanese moon lander SELENE-2.Present status in 2009 , 2011 .

[10]  David Wettergreen,et al.  Visualizing and Analyzing Machine-soil Interactions using Computer Vision , 2014, J. Field Robotics.

[11]  Jo Yung Wong,et al.  Theory of ground vehicles , 1978 .

[12]  Kiyoshi Omine,et al.  Mobility performance of a rigid wheel in low gravity environments , 2010 .

[13]  Aloysius F. Hepp,et al.  Mars Pathfinder wheel abrasion experiment: Ground and Flight Results , 1998 .

[14]  Joseph K. Norwood,et al.  MSFC Lunar Environments Test System (LETS) System Development , 2009 .

[15]  Masatsugu Otsuki,et al.  Terramechanics evaluation of low-pressure wheel on deformable terrain , 2011, 2011 IEEE International Conference on Robotics and Automation.

[16]  Julie E. Kleinhenz,et al.  Development and Testing of an ISRU Soil Mechanics Vacuum Test Facility , 2014 .

[17]  Grant Heiken,et al.  Book-Review - Lunar Sourcebook - a User's Guide to the Moon , 1991 .

[18]  Keiji Nagatani,et al.  Experimental study and analysis on driving wheels' performance for planetary exploration rovers moving in deformable soil , 2011 .