Subarrayed 4D antenna arrays with tapered amplitude excitations

A modified approach of tapered amplitude weighting for subarrayed 4D antenna arrays is proposed in this paper. Based on the combination of time weighted subarray outputs and constant element static weightings in subarrays, this approach can significantly suppress the quantitative sidelobe level of subarrayed 4D arrays. Numerical examples with three different approaches of amplitude tapers in 4D linear arrays are presented and compared to demonstrate the effectiveness of the proposed modified approach. Simulation results validate that this approach is a good trade-off of low sidelobe level and simplicity of design.

[1]  Chong He,et al.  Space-Division Multiple Access Based on Time-Modulated Array , 2015, IEEE Antennas and Wireless Propagation Letters.

[2]  Randy L. Haupt Optimization of subarray amplitude tapers , 1995, IEEE Antennas and Propagation Society International Symposium. 1995 Digest.

[3]  Shiwen Yang,et al.  Design of a uniform amplitude time modulated linear array with optimized time sequences , 2005, IEEE Transactions on Antennas and Propagation.

[4]  Ruilin Yao,et al.  Directional Modulation Based on 4-D Antenna Arrays , 2014, IEEE Transactions on Antennas and Propagation.

[5]  Alessandra Costanzo,et al.  Dynamic wireless power transfer by time-modulated arrays , 2015, 2015 IEEE International Symposium on Antennas and Propagation & USNC/URSI National Radio Science Meeting.

[6]  A. Tennant,et al.  A Two-Element Time-Modulated Array With Direction-Finding Properties , 2007, IEEE Antennas and Wireless Propagation Letters.

[7]  Shiwen Yang,et al.  Design of a uniform amplitude time modulated linear array with optimized time sequences , 2005 .

[8]  P. Rocca,et al.  Synthesis of Sub-Arrayed Time Modulated Linear Arrays Through a Multi-Stage Approach , 2011, IEEE Transactions on Antennas and Propagation.

[9]  Aaas News,et al.  Book Reviews , 1893, Buffalo Medical and Surgical Journal.