Analysis and comparison of high power semiconductor device losses in 5MW PMSG MV wind turbines

This paper provides a comparison of high power semiconductor devices in 5MW-class Permanent Magnet Synchronous Generator (PMSG) Medium Voltage (MV) wind turbines. High power semiconductor devices of press-pack type IGCT, module type IGBT, press-pack type IEGT, and press-pack type IGBT of both 4.5kV and 6.5kV are considered in this paper. Benchmarking is performed based on neutral point clamped 3-level back-to-back type voltage source converter supplied from grid voltage of 4160V. The feasible number of semiconductor devices in parallel is designed through the loss analysis considering both conduction and switching losses under the given operating conditions of 5MW-class PMSG wind turbines, particularly for the application in offshore wind farms. The loss analysis is confirmed through PLECS simulations. The comparison result shows that press-pack IGCT type semiconductor device has the highest efficiency.

[1]  Hirofumi Akagi,et al.  A New Neutral-Point-Clamped PWM Inverter , 1981, IEEE Transactions on Industry Applications.

[2]  Bin Wu,et al.  High-Power Converters and ac Drives: Wu/High-Power Converters and ac Drives , 2006 .

[3]  M. Tsukakoshi,et al.  Higher efficiency three-level inverter employing IEGTs , 2004, Nineteenth Annual IEEE Applied Power Electronics Conference and Exposition, 2004. APEC '04..

[4]  Bin Wu,et al.  Recent Advances and Industrial Applications of Multilevel Converters , 2010, IEEE Transactions on Industrial Electronics.

[5]  L. Clotea,et al.  Power losses evaluation of two and three-level NPC inverters considering drive applications , 2012, 2012 13th International Conference on Optimization of Electrical and Electronic Equipment (OPTIM).

[6]  Bin Wu,et al.  High-Power Converters and AC Drives , 2006 .

[7]  S. Bernet,et al.  Comparison of IGCT and IGBT for the use in the modular multilevel converter for HVDC applications , 2012, International Multi-Conference on Systems, Sygnals & Devices.

[8]  Yongsug Suh,et al.  Efficiency Comparison of Voltage-Source and Current-Source Drive Systems for Medium-Voltage Applications , 2007, IEEE Transactions on Industrial Electronics.

[9]  S. Bernet,et al.  State of the art and developments of medium voltage converters - an overview , 2006 .

[10]  P. Steimer,et al.  10 kV IGCTs , 2005, IEEE Industry Applications Magazine.

[11]  S. Bernet,et al.  Recent developments of high power converters for industry and traction applications , 2000 .

[12]  Steffen Bernet,et al.  Characterization of a new 4.5 kV press pack SPT+ IGBT for medium voltage converters , 2009, 2009 IEEE Energy Conversion Congress and Exposition.

[13]  Marco Liserre,et al.  Grid-Filter Design for a Multimegawatt Medium-Voltage Voltage-Source Inverter , 2011, IEEE Transactions on Industrial Electronics.

[14]  Yongsug Suh,et al.  Efficiency comparison of voltage source and current source drive system for medium voltage applications , 2005, 2005 European Conference on Power Electronics and Applications.

[15]  Bin Wu,et al.  Multilevel Voltage-Source-Converter Topologies for Industrial Medium-Voltage Drives , 2007, IEEE Transactions on Industrial Electronics.

[16]  H. Kon,et al.  The 4500 V-750 A planar gate press pack IEGT , 1998, Proceedings of the 10th International Symposium on Power Semiconductor Devices and ICs. ISPSD'98 (IEEE Cat. No.98CH36212).

[17]  P. Steimer,et al.  Design, simulation and realization of high power NPC converters equipped with IGCTs , 1998, Conference Record of 1998 IEEE Industry Applications Conference. Thirty-Third IAS Annual Meeting (Cat. No.98CH36242).