Hydrogen-free amorphous carbon films: correlation between growth conditions and properties

Abstract Hydrogen-free amorphous carbon films with properties ranging between those of graphite and diamond were deposited using a variety of experimental methods. All the different deposition systems apply energetic ( E > 10 eV) species to modify the properties of the films (usually called diamond-like carbon (DLC), a name that describes films very different from one another), but they vary in the way in which the energy is transferred to the evolving film and in the amount of control over the deposition parameters. This study reviews our present understanding of DLC growth mechanisms and discusses the correlation between the deposition parameters (e.g. species energy, substrate temperature, substrate material, angle of incidence, deposition rate and environment) and the film properties (density, surface morphology, sp 3 /sp 2 ratio) studied using a host of experimental methods. The data are described in terms of the “subplantation model” which regards the deposition process as a shallow implantation. The properties of the films are determined by the amount of carbon species trapped in subsurface positions (internal growth governed by stress) or on the surface (surface growth).

[1]  T. Frauenheim,et al.  Model studies of the structure and chemical bonding in amorphous carbon films prepared by magnetron sputtering , 1995 .

[2]  J. Bruley,et al.  Energetic carbon deposition at oblique angles , 1992 .

[3]  H. Hofsäss,et al.  Doping and growth of diamond-like carbon films by ion beam deposition , 1994 .

[4]  James P. Doyle,et al.  Vapor deposition processes for amorphous carbon films with sp3 fractions approaching diamond , 1991 .

[5]  P. E. Mijnarends,et al.  Effect of ion beam assistance on the microstructure of nonhydrogenated amorphous carbon , 1994 .

[6]  K. Ogata,et al.  Crystallization of carbon films by ion beam assist technology , 1988 .

[7]  M. Kitabatake,et al.  Diamond films by ion‐assisted deposition at room temperature , 1988 .

[8]  A. Anttila,et al.  Preparation and Properties of High Density, Hydrogen Free Hard Carbon Films with Direct Ion Beam or Arc Discharge Deposition , 1991 .

[9]  W. Möller.  Modeling of the sp3/sp2 ratio in ion beam and plasma‐deposited carbon films , 1991 .

[10]  R. Kalish,et al.  The influence of substrate temperature during ion beam deposition on the diamond-like or graphitic nature of carbon films , 1993 .

[11]  Marton.,et al.  Auger-electron-spectroscopy analysis of chemical states in ion-beam-deposited carbon layers on graphite. , 1991, Physical review. B, Condensed matter.

[12]  D. Joy,et al.  Ion‐beam‐deposited polycrystalline diamondlike films , 1976 .

[13]  G. L. Trigg,et al.  Encyclopedia of Applied Physics , 1994 .

[14]  Lifshitz,et al.  Subplantation model for film growth from hyperthermal species: Application to diamond. , 1989, Physical review letters.

[15]  G. Gard,et al.  The epitaxial synthesis of diamond by the deposition of low energy carbon ions , 1984 .

[16]  S. Alterovitz,et al.  Properties and Characterization of Amorphous Carbon Films , 1990 .

[17]  Eitan Grossman,et al.  Growth mechanisms of DLC films from C+ ions: experimental studies , 1995 .

[18]  Mckenzie,et al.  Neutron-scattering studies of the structure of highly tetrahedral amorphous diamondlike carbon. , 1991, Physical review letters.

[19]  G. Amaratunga,et al.  Optical and electronic properties of amorphous diamond , 1993 .

[20]  C. B. Collins,et al.  Noncrystalline films with the chemistry, bonding, and properties of diamond , 1993 .

[21]  P. T. Murray,et al.  Dynamics of amorphous carbon film growth by pulsed laser deposition: kinetic energy of the incident particles☆ , 1994 .

[22]  F. Davanloo,et al.  Microstructure of amorphic diamond films , 1991 .

[23]  W. Eckstein,et al.  Subplantation model for film growth from hyperthermal species. , 1990, Physical review. B, Condensed matter.

[24]  W. Eckstein,et al.  Analysis of carbon film growth from low energy ion beams using dynamic trajectory simulations and Auger electron spectroscopy , 1993 .

[25]  S. Aisenberg,et al.  Ion‐Beam Deposition of Thin Films of Diamondlike Carbon , 1971 .

[26]  P. Hess,et al.  Characterization of thin diamond-like carbon films by ultrasonic surface waves , 1993 .

[27]  John Robertson,et al.  Deposition mechanisms for promoting sp3 bonding in diamond-like carbon , 1993 .

[28]  Gehan A. J. Amaratunga,et al.  Properties of tetrahedral amorphous carbon prepared by vacuum arc deposition , 1991 .

[29]  J. Bruley,et al.  Properties of amorphous diamond films prepared by a filtered cathodic arc , 1995 .

[30]  Y. Lifshitz,et al.  Electron‐energy‐loss spectroscopy of mass‐selected ion‐beam‐deposited diamondlike carbon , 1994 .

[31]  Marton.,et al.  sp3 content of mass-selected ion-beam-deposited carbon films determined by inelastic and elastic electron scattering. , 1995, Physical review. B, Condensed matter.

[32]  R. Kalish,et al.  The effect of ion energy on the diamond-like/graphitic (sp3/sp2) nature of carbon films deposited by ion beams , 1994 .

[33]  F. Rossi,et al.  Monte Carlo Modelling of Ion-Beam-Assisted-Deposition: Application to Diamondlike Carbon , 1992 .

[34]  G. Amaratunga,et al.  Hydrogen-free amorphous carbon preparation and properties , 1994 .

[35]  E. M. Juengerman,et al.  Amorphic diamond films produced by a laser plasma source , 1990 .

[36]  T. Takagi,et al.  Transparent carbon film prepared by mass‐separated negative‐carbon‐ion‐beam deposition , 1987 .

[37]  J. Rabalais,et al.  Performance of mass analyzed, low‐energy, dual ion beam system for materials research , 1994 .

[38]  John Robertson,et al.  Properties of diamond-like carbon , 1992 .

[39]  J. Robertson.  The deposition mechanism of diamond-like a-C and a-C: H , 1994 .

[40]  W. Chu,et al.  Substrate temperature dependence of homoepitaxial growth of Si using mass selected ion beam deposition , 1994 .

[41]  C. Ronning,et al.  Cubic boron nitride films grown by low energy B+ and N+ ion beam deposition , 1995 .

[42]  Shui-Tong Lee,et al.  DIRECT ION-BEAM DEPOSITION OF CARBON-FILMS ON SILICON IN THE ION ENERGY-RANGE OF 15-500 EV , 1991 .

[43]  C. Davis,et al.  A simple model for the formation of compressive stress in thin films by ion bombardment , 1993 .

[44]  Nieminen,et al.  Molecular-dynamics simulation of the growth of diamondlike films by energetic carbon-atom beams. , 1992, Physical review letters.

[45]  David B. Bogy,et al.  Characterization of diamondlike carbon films and their application as overcoats on thin‐film media for magnetic recording , 1987 .

[46]  S. Falabella,et al.  Coating technology based on the vacuum arc-a review , 1990 .

[47]  J. Rabalais.  Low energy ion-surface interactions , 1994 .

[48]  T. Frauenheim,et al.  Molecular dynamic investigations of amorphous carbon: π bonding vs. electronic defect generation , 1994 .

[49]  H. Scheibe,et al.  DLC film deposition by Laser-Arc and study of properties , 1994 .

[50]  Tieer Gu,et al.  Pulsed laser deposition of diamond‐like carbon films , 1992 .

[51]  McKenzie,et al.  Compressive-stress-induced formation of thin-film tetrahedral amorphous carbon. , 1991, Physical review letters.

[52]  Robertson,et al.  Comparison of neutron-scattering data for tetrahedral amorphous carbon with structural models. , 1995, Physical review. B, Condensed matter.

[53]  J. Angus.  Empirical categorization and naming of ``diamond-like'' carbon films , 1986 .

[54]  Grossman,et al.  Substantiation of subplantation model for diamondlike film growth by atomic force microscopy. , 1994, Physical review letters.

[55]  Robertson,et al.  Properties of filtered-ion-beam-deposited diamondlike carbon as a function of ion energy. , 1993, Physical review. B, Condensed matter.

[56]  D. Mckenzie,et al.  EELS analysis of vacuum arc-deposited diamond-like films , 1988 .