Effect of Fiber Orientation on the Energy Absorption Capability of Carbon Fiber/PEEK Composite Tubes

Previous research works identified the effects of cooling rate, testing speed and tube geometry on the energy absorption behavior of carbon fiber reinforced polyether-ether-ketone (carbon/PEEK) composite tubes. One of the objectives of this work is to optimize the energy absorption capability of these tubes by changing the fiber orientation. Composite tubes with fiber orientations 0°, ±5°, ±10°, ±15°, ±20°, ±25° and ±30° with respect to the axis of the tube have been investigated. The energy absorption capability as well as the crush zone morphology were dependent on the fiber orientation. Efforts have been made to relate the variations of specific energy to the changes in the crush zone morphology. Tubes with ±15° fiber orientation displayed a specific energy of 225 kJ/kg, the highest ever reported in the literature. The fracture mechanisms that resulted in the superior energy absorption performance of these tubes have been identified.

[1]  D. Hull,et al.  Energy absorption capability of epoxy composite tubes with knitted carbon fibre fabric reinforcement , 1993 .

[2]  Gary L. Farley,et al.  Analogy for the Effect of Material and Geometrical Variables on Energy-Absorption Capability of Composite Tubes , 1992 .

[3]  P. H. Thornton,et al.  Energy Absorption in Composite Tubes , 1982 .

[4]  D. Hull,et al.  Progressive crushing behaviour of glass/epoxy composite tubes with different surface treatment , 1994 .

[5]  Gary L. Farley,et al.  Effect of Fiber and Matrix Maximum Strain on the Energy Absorption of Composite Materials , 1985 .

[6]  D. Hull,et al.  Comparison of energy absorption of carbon/epoxy and carbon/PEEK composite tubes , 1992 .

[7]  D. Hull,et al.  A unified approach to progressive crushing of fibre-reinforced composite tubes , 1991 .

[8]  K. Kageyama,et al.  Effect of Fiber Orientation on Mode I and Mode II Interlaminar Fracture Toughness of CFRP Laminates. , 1993 .

[9]  L. E. Wickliffe,et al.  Impact Energy Absorption of Continuous Fiber Composite Tubes , 1987 .

[10]  Gary L. Farley,et al.  The Effects of Crushing Speed on the Energy-Absorption Capability of Composite Tubes , 1991 .

[11]  Gary L. Farley,et al.  Crushing Characteristics of Composite Tubes with "Near-Elliptical" Cross Sections , 1992 .

[12]  G. L. Farley.  Energy absorption of composite material and structure , 1987 .

[13]  D. Hull,et al.  Axial crushing of glass fibre-polyester composite cones , 1987 .

[14]  Maciej Kumosa,et al.  Trigger mechanisms in energy-absorbing glass cloth/epoxy tubes , 1991 .

[15]  Gary L. Farley,et al.  Effect of Specimen Geometry on the Energy Absorption Capability of Composite Materials , 1986 .

[16]  P. H. Thornton.  The Crush Behavior of Pultruded Tubes at High Strain Rates , 1990 .

[17]  P. H. Thornton.  The crush behavior of glass fiber reinforced plastic sections , 1986 .

[18]  Gary L. Farley,et al.  Energy Absorption of Composite Materials , 1983 .