Contactless DC Connector Based on GaN LLC Converter for Next-Generation Data Centers

An inductively coupled contactless dc connector has been proposed for the next-generation 380-V dc distribution system in data centers. A LLC resonant dc-dc converter topology with gallium nitride (GaN) power transistors has been applied to realize the short-distance highly efficient contactless power transfer. A prototype of a 1.2-kW 384- to 192-V connector has been fabricated and the conversion efficiency of over 95% with the power density of 8.1 W/cm3 has been confirmed experimentally under 1000-kHz operation. The design consideration has been carried out and the potential to achieve 10.0 W/cm3 has been also shown taking the feature of the GaN power device and the characteristics of the magnetic core material for the transformer into account. The contactless dc connector integrates the functioning of an isolated dc-dc converter into a connector for space saving, and the dc current can be cut off without arc because of the inductive coupling. The proposed connector contributes to realizing a highly efficient, space saving, and reliable future 380-V dc distribution system.

[1]  Yasuyuki Sugiyama.  Green ICT toward Low Carbon Society , 2012 .

[2]  Toshifumi Ise,et al.  Design consideration for contactless DC connector in high power density future 380 V DC distribution system , 2014, 2014 IEEE Energy Conversion Congress and Exposition (ECCE).

[3]  Yusuke Hayashi,et al.  Fundamental study of high density DC/DC converter design based on sensitivity analysis , 2009, INTELEC 2009 - 31st International Telecommunications Energy Conference.

[4]  Fred C. Lee,et al.  Simulation model development and verification for high voltage GaN HEMT in cascode structure , 2013, 2013 IEEE Energy Conversion Congress and Exposition.

[5]  N. Idir,et al.  Skin effect and dielectric loss models of power cables , 2009, IEEE Transactions on Dielectrics and Electrical Insulation.

[6]  Andrew D. Brown,et al.  A contactless electrical energy transmission system , 1999, IEEE Trans. Ind. Electron..

[7]  Yusuke Hayashi.  High Power Density Rectifier for Highly Efficient Future DC Distribution System , 2013 .

[8]  Yueh-Ru Yang.  A contactless charger with LLC tank and microcontroller , 2009, 2009 35th Annual Conference of IEEE Industrial Electronics.

[9]  Kazuto Takao,et al.  Novel exact power loss design method for high output power density converter , 2006 .

[10]  Akira Matsumoto,et al.  Development of 400-Vdc output rectifier for 400-Vdc power distribution system in telecom sites and data centers , 2010, Intelec 2010.

[11]  Roger R. Schmidt,et al.  Evolution of Data Center Environmental Guidelines , 2004 .

[12]  Tadatoshi Babasaki,et al.  Developing of higher voltage direct-current power-feeding prototype system , 2009, INTELEC 2009 - 31st International Telecommunications Energy Conference.

[13]  Toshihisa Shimizu,et al.  A Novel Inductor Loss Calculation Method on Power Converters Based on Dynamic Minor Loop , 2006 .

[14]  Johann W. Kolar,et al.  Hyper-efficient (98%) and super-compact (3.3kW/dm3) isolated AC/DC telecom power supply module based on multi-cell converter approach , 2014, 2014 IEEE Energy Conversion Congress and Exposition (ECCE).

[15]  H. Ishii,et al.  Dynamic iron loss measurement method for an AC filter inductor on a PWM inverter , 2007, 2007 European Conference on Power Electronics and Applications.

[16]  YusukeHayashi.  Multi-converter Approach to Higher Power Density DC-DC Converter for 380 V DC Distribution System , 2013 .

[17]  Eun-Soo Kim,et al.  A contactless power supply for photovoltaic power generation system , 2008, 2008 Twenty-Third Annual IEEE Applied Power Electronics Conference and Exposition.

[18]  Bernd Eckardt,et al.  Automotive Powertrain DC/DC Converter with 25kW/dm(exp3) by using SiC Diodes , 2006 .

[19]  Chern-Lin Chen,et al.  LLC resonant converter for wireless energy transmission system with PLL control , 2008, 2008 IEEE International Conference on Sustainable Energy Technologies.

[20]  J. Biela,et al.  Exploring the pareto front of multi-objective single-phase PFC rectifier design optimization - 99.2% efficiency vs. 7kW/din3 power density , 2009, 2009 IEEE 6th International Power Electronics and Motion Control Conference.

[21]  Yushi Miura,et al.  Inductive contactless power transfer system with coaxial coreless transformer for dc power distribution , 2013, 2013 IEEE ECCE Asia Downunder.

[22]  J. W. Kolar,et al.  An optimized, 99% efficient, 5 kW, phase-shift PWM DC-DC converter for data centers and telecom applications , 2010, The 2010 International Power Electronics Conference - ECCE ASIA -.

[23]  Weimin Zhang,et al.  Evaluation of 600 V cascode GaN HEMT in device characterization and all-GaN-based LLC resonant converter , 2013, 2013 IEEE Energy Conversion Congress and Exposition.

[24]  Johann W. Kolar,et al.  Hyper-Efficient (98%) and Super-Compact (3kW/dm3) 3.3kW Telecom Rectifier Module based on Series/Parallel Multi-Cell Converter Approach , 2014 .

[25]  J.W. Kolar,et al.  Design of a 5kW, 1U, 10kW/ltr. resonant DC-DC converter for telecom applications , 2007, INTELEC 07 - 29th International Telecommunications Energy Conference.

[26]  Toshifumi Ise,et al.  Contactless DC connector based on ISOP-IPOS topology for high power density 380 V DC power feeding system , 2014, 2014 16th European Conference on Power Electronics and Applications.

[27]  Yusuke Hayashi,et al.  An Approach to a Higher-Power-Density Power Supply for a 380-V DC Distribution System , 2014 .

[28]  Hiromichi Ohashi.  Research Activities of the Power Electronics Research Centre with Special Focus on Wide Band Gap Materials , 2006 .

[29]  Hang-Seok Choi,et al.  Design Consideration of Half-Bridge LLC Resonant Converter , 2007 .

[30]  Fred C. Lee,et al.  High Power Density, High Efficiency System Two-stage Power Architecture for Laptop Computers , 2006 .

[31]  Johann W. Kolar,et al.  Solid-State-Transformers: Key Components of Future Traction and Smart Grid Systems , 2014 .