论文信息 - Fabrication of Movable Mirror-Array Structure Using Hot-Embossing for Optical Switch Applications

Fabrication of Movable Mirror-Array Structure Using Hot-Embossing for Optical Switch Applications

A new micro hot-embossing process which combines the high accuracy of silicon micromachining process and low cost production of forming process was reported. A movable cantilever-array structure with vertical mirrors were designed under the limitation of hot-embossing fabrication and material properties of polymer. The cantilever has non-uniform width optimized for electrostatic actuation and high-density array configuration. Two metal molds were transferred by electroplating from silicon structures which is micromachined by DRIE and anisotropic wet etching. The polymer optical switch array chip was produced by hot-embossing between the two molds and laser cutting. Finally, the operation of the assembled 8 × 8 optical switch system was demonstrated.

[1] Hiroshi Goto,et al. Optical switch array based on microforming process , 2001, SPIE Micro + Nano Materials, Devices, and Applications.

[2] W. R. Runyan. Silicon Semiconductor Technology , 1965 .

[3] Development of a novel self-sensitive atomic force microscope for nondestructive measurement of micro vertical surfaces , 2004 .

[4] X. C. SHAN,et al. A Polymer-Based Optical Switch Fabricated Using Silicon Process, Electroplating And Micro Hot Embossing , 2003, Int. J. Comput. Eng. Sci..

[5] Ryutaro Maeda,et al. Development of a micro hot embossing process for fabricating micro-optical devices , 2002, SPIE Micro + Nano Materials, Devices, and Applications.

[6] J. Wortman,et al. Young's Modulus, Shear Modulus, and Poisson's Ratio in Silicon and Germanium , 1965 .

[7] X. Shan,et al. A novel self-sensitive SFM for nondestructive measurement of tiny vertical surfaces with restricted access , 2003, Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS 2003..