Heat transfer during discharging of NEPCM through the finned container

[1]  Z. Khalili,et al.  Environmental and energy analysis for photovoltaic-thermoelectric solar unit in existence of nanofluid cooling reporting CO2 emission reduction , 2024, Journal of the Taiwan Institute of Chemical Engineers.

[2]  Waleed Hamali,et al.  Effect of loading Fe3O4 nanoparticles on electrical performance of solar panel utilizing numerical modeling , 2024, Case Studies in Thermal Engineering.

[3]  Z. Khalili,et al.  Environmental and energy assessment of photovoltaic-thermal system combined with a reflector supported by nanofluid filter and a sustainable thermoelectric generator , 2024, Journal of Cleaner Production.

[4]  A. H. Milyani,et al.  Management of period of solidification with loading nanoparticles simulating unsteady heat transfer , 2023, Case Studies in Thermal Engineering.

[5]  A. H. Milyani,et al.  Acceleration the solidification process of cold-thermal storage/nanoparticles using finned container: A numerical study , 2023, Case Studies in Thermal Engineering.

[6]  Hakeem A. Othman,et al.  Nanomaterial heat transfer within thermal porous system in presence of Lorentz force , 2023, Case Studies in Thermal Engineering.

[7]  M. Sheikholeslami.  Numerical investigation for concentrated Photovoltaic solar system in existence of paraffin equipped with MWCNT nanoparticles , 2023, Sustainable Cities and Society.

[8]  S. J. Mousavi,et al.  Influence of self-cleaning coating on performance of photovoltaic solar system utilizing mixture of phase change material and Graphene nanoparticle , 2023, Journal of Building Engineering.

[9]  Nehad Ali Shah,et al.  Melting rheology of three-dimensional Maxwell nanofluid (graphene-engine-oil) flow with slip condition past a stretching surface through Darcy-Forchheimer medium , 2023, Results in Physics.

[10]  Yanju Liu,et al.  Large-Scale Fabrication of Superhydrophobic Shape Memory Composite Films for Efficient Anti-Icing and De-Icing , 2023, SSRN Electronic Journal.

[11]  Y. Cai,et al.  Experimental and simulation evaluation of CO2/CO separation under different component ratios in blast furnace gas on zeolites , 2023, Chemical Engineering Journal.

[12]  M. Sheikholeslami.  Efficacy of porous foam on discharging of phase change material with inclusion of hybrid nanomaterial , 2023, Journal of Energy Storage.

[13]  Fuzhang Wang,et al.  Solar Radiative and Chemical Reactive Influences on Electromagnetic Maxwell Nanofluid Flow in Buongiorno Model , 2023, Journal of Magnetism and Magnetic Materials.

[14]  M. Sheikholeslami,et al.  Modification of heat storage system involving Trombe wall in existence of paraffin enhanced with nanoparticles , 2023, Journal of Energy Storage.

[15]  Hakeem A. Othman,et al.  Numerical modeling for thermal behavior of nanomaterial laminar flow and convective heat transfer in appearance of magnetic field , 2023, Case Studies in Thermal Engineering.

[16]  Aisha M. Alqahtani,et al.  Natural convection in nanofluid flow with chemotaxis process over a vertically inclined heated surface , 2023, Arabian Journal of Chemistry.

[17]  Hao Wang,et al.  An Assessment of Seal ability of Tubing Threaded Connections: A Hybrid Empirical-Numerical Method , 2022, Journal of Energy Resources Technology.

[18]  Hakeem A. Othman,et al.  Expedition of discharging of energy storage unit with adding nanoparticles using numerical technique , 2022, Journal of Energy Storage.

[19]  Hakeem A. Othman,et al.  Thermal storage evaluation in existence of nano-sized additives by mean of numerical method , 2022, Journal of Energy Storage.

[20]  Hakeem A. Othman,et al.  Investigation of behavior of heat storage system including paraffin with involving MWCNT nanoparticles , 2022, Journal of Energy Storage.

[21]  M. Sheikholeslami.  Numerical analysis of solar energy storage within a double pipe utilizing nanoparticles for expedition of melting , 2022, Solar Energy Materials and Solar Cells.

[22]  Hakeem A. Othman,et al.  Examination of treatment of energy storage unit with inclusion of nanomaterial , 2022, Journal of Energy Storage.

[23]  Feipeng Wang,et al.  Proportional Optimization Model of Multiscale Spherical BN for Enhancing Thermal Conductivity , 2022, ACS Applied Electronic Materials.

[24]  M. Sheikholeslami.  Analyzing melting process of paraffin through the heat storage with honeycomb configuration utilizing nanoparticles , 2022, Journal of Energy Storage.

[25]  Hakeem A. Othman,et al.  Nanomaterial efficacy on freezing of PCM with involvement of numerical simulation , 2022, Journal of Molecular Liquids.

[26]  Y. Rothan.  Modeling for freezing of PCM enhanced with nano-powders within a duct , 2022, The European Physical Journal Plus.

[27]  Y. Rothan.  Thermal analysis for solidification of PCM including nanoparticles within a container , 2022, Case Studies in Thermal Engineering.

[28]  Y. Rothan.  Numerical approach for melting of paraffin inside a duct containing multi sinusoidal PCM containers , 2022, Journal of Petroleum Science and Engineering.

[29]  S Nadeem,et al.  Numerical analysis for the effects of heat transfer in modified square duct with heated obstacle inside it , 2021, International Communications in Heat and Mass Transfer.

[30]  Y. Rothan.  Investigation of hybrid nanomaterial application in melting process of paraffin enhanced with nanoparticles , 2021, Physica Scripta.

[31]  Mohammed N. Alghamdi,et al.  Combined effect of using porous media and nano-particle on melting performance of PCM filled enclosure with triangular double fins , 2021 .

[32]  N. Abu‐Hamdeh,et al.  Nanoparticle enhanced PCM exergy loss and thermal behavior by means of FVM , 2020 .

[33]  N. Abu‐Hamdeh,et al.  Approaches for expedition of discharging of PCM involving nanoparticles and radial fins , 2020 .

[34]  Y. Chu,et al.  Influence of wavy enclosure and nanoparticles on heat release rate of PCM considering numerical study , 2020 .

[35]  Y. Chu,et al.  Investigation of nano powders influence on melting process within a storage unit , 2020 .

[36]  Q. Bach,et al.  Finned unit solidification with use of nanoparticles improved PCM , 2020 .

[37]  P. Sibanda,et al.  Effect of Cattaneo-Christov heat flux on radiative hydromagnetic nanofluid flow between parallel plates using spectral quasilinearization method , 2020 .

[38]  C. Park,et al.  Parametric evaluation of a hydrofoil-shaped sidewall rib-employed microchannel heat sink with and without nano-encapsulated phase change material slurry as coolant , 2020 .

[39]  R. Sivaraj,et al.  Stability analysis of Casson nanofluid over an extending/contracting wedge and stagnation point , 2020 .

[40]  B. Kok.  Examining effects of special heat transfer fins designed for the melting process of PCM and Nano-PCM , 2020 .

[41]  M. Sheikholeslami.  Numerical simulation for solidification in a LHTESS by means of nano-enhanced PCM , 2018 .

[42]  Xiang Shen,et al.  Unraveling the Crystallization Kinetics of Supercooled Liquid GeTe by Ultrafast Calorimetry , 2017 .

[43]  Ronald J. Warzoha,et al.  Energy storage and solidification of paraffin phase change material embedded with graphite nanofibers , 2011 .

[44]  Suman Chakraborty,et al.  A hybrid lattice Boltzmann model for solid–liquid phase transition in presence of fluid flow , 2006 .