Flat polymer ribbons and other shapes by electrospinning

In addition to round nanofibers, electrospinning a polymer solution can produce thin fibers with a variety of cross-sectional shapes. Branched fibers, flat ribbons, ribbons with other shapes, and fibers that were split longitudinally from larger fibers were observed. The transverse dimensions of these asymmetric fibers were typically 1 or 2 μm, measured in the widest direction. A correlation of the branches and bends, observed in high-frame-rate videography of the electrified jets of polymer solutions from which the ribbons and branched fibers were produced, suggest that these phenomena occur at scales ranging from around 1 mm to 1 μm. The observation of fibers with these cross-sectional shapes from a number of different kinds of polymers and solvents indicates that fluid mechanical effects, electrical charge carried with the jet, and evaporation of the solvent all contributed to the formation of the fibers. The influence of a skin on the jets of polymer solutions accounts for a number of the observations. The observed shapes can be used as guides for the extension of mathematical or computer-generated models for the electrospinning process. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2598–2606, 2001

[1]  P. Baumgarten,et al.  Electrostatic spinning of acrylic microfibers , 1971 .

[2]  J. Masson Acrylic Fiber Technology and Applications , 1995 .

[3]  Darrell H. Reneker,et al.  Bending instability in electrospinning of nanofibers , 2001 .

[4]  L. Larrondo,et al.  Electrostatic fiber spinning from polymer melts. I. Experimental observations on fiber formation and properties , 1981 .

[5]  Disintegration of a charged viscous jet in a high electric field , 2001 .

[6]  David C. Martin,et al.  Processing and microstructural characterization of porous biocompatible protein polymer thin films , 1999 .

[7]  Darrell H. Reneker,et al.  Structure and morphology of small diameter electrospun aramid fibers , 1995 .

[8]  Darrell H. Reneker,et al.  Beaded nanofibers formed during electrospinning , 1999 .

[9]  Elliot L. Chaikof,et al.  Generation of Synthetic Elastin-Mimetic Small Diameter Fibers and Fiber Networks , 2000 .

[10]  H. Fong,et al.  Elastomeric Nanofibers of Styrene-Butadiene-Styrene Triblock Copolymer , 1999 .

[11]  Frank Ko,et al.  Electrostatic fabrication of ultrafine conducting fibers: polyaniline/polyethylene oxide blends , 2000 .

[12]  Holger Schönherr,et al.  Chain Packing in Electro-Spun Poly(ethylene oxide) Visualized by Atomic Force Microscopy , 1996 .

[13]  Michael P. Brenner,et al.  Electrospinning: A whipping fluid jet generates submicron polymer fibers , 2001 .

[14]  D. Reneker,et al.  Nanometre diameter fibres of polymer, produced by electrospinning , 1996 .

[15]  Darrell H. Reneker,et al.  Carbon nanofibers from polyacrylonitrile and mesophase pitch , 1999 .

[16]  J. Deitzel,et al.  The effect of processing variables on the morphology of electrospun nanofibers and textiles , 2001 .

[17]  Darrell H. Reneker,et al.  Bending instability of electrically charged liquid jets of polymer solutions in electrospinning , 2000 .

[18]  Gyula J. Vancso,et al.  Transparent Nanocomposites with Ultrathin, Electrospun Nylon-4,6 Fiber Reinforcement , 1999 .

[19]  Michael P. Brenner,et al.  Electrospinning and electrically forced jets. II. Applications , 2001 .

[20]  L. Garrod Monilia in the Sputum , 1934 .