On the internal morphologies of high-modulus polyethylene and polypropylene fibres

High modulus polyethylene fibres, both melt and gel-spun, contain the same longitudinal density deficient regions, revealed by permanganic etching, as were found in specimens of the same fibres after treatment by the Leeds high temperature compaction process. For these materials a new model of fibre structure is proposed, which develops as a consequence of nucleation on an extended network of entangled molecules permeating the fibres. Subsequent growth into spaces between the network will encounter stresses due to the contraction on crystallization leading to distributed density deficient regions of high free volume. Each of the four commercial PE fibres examined differs from the others in its characteristic outline and the details of its internal substructure. The structure of commercial polypropylene fibres is also compared.

[1]  I. Ward,et al.  Novel composites by hot compaction of fibers , 1997 .

[2]  I. Ward,et al.  Compaction of high-modulus melt-spun polyethylene fibres at temperatures above and below the optimum , 1994, Journal of Materials Science.

[3]  A. Pennings,et al.  A STUDY OF TRANSVERSE AND LONGITUDINAL SIZE EFFECTS IN HIGH-STRENGTH POLYETHYLENE FIBERS , 1994 .

[4]  I. Ward,et al.  Structural studies of ultrahigh-modulus linear polyethylene using nitric acid etching and gel permeation chromatography. I. Determination of the crystal size distribution , 1981 .

[5]  I. Ward,et al.  Differential melting in compacted high-modulus melt-spun polyethylene fibres , 1995, Journal of Materials Science.

[6]  I. Ward,et al.  The hot compaction of high modulus melt-spun polyethylene fibres , 1993 .

[7]  A. J. Pennings,et al.  The effect of temperature and deformation rate on the hot‐drawing behavior of porous high‐molecular‐weight polyethylene fibers , 1982 .

[8]  P. Mulheran.  On the statistical properties of the two-dimensional random voronoi network , 1992 .

[9]  I. Ward,et al.  The relation between filament diameter and fracture strength for ultra-high-modulus polyethylene fibres , 1993, Journal of Materials Science.

[10]  A. Galeski,et al.  Localized volume deficiencies as an effect of spherulite growth. II. The three‐dimensional case , 1983 .

[11]  I. Ward,et al.  The hot compaction of SPECTRA gel-spun polyethylene fibre , 1997 .

[12]  Menachem Lewin,et al.  High technology fibers , 1985 .

[13]  P. Barham,et al.  High-strength polyethylene fibres from solution and gel spinning , 1985 .

[14]  I. Ward,et al.  The hot compaction of polypropylene fibres , 1996, Journal of Materials Science.

[15]  H. Cantow,et al.  Scanning force microscopy of high modulus polyethylene fibers , 1995 .

[16]  I. Ward,et al.  Morphology of compacted polyethylene fibres , 1993, Journal of Materials Science.

[17]  A. Keller,et al.  A new route to high modulus polyethylene by lamellar structures nucleated onto fibrous substrates with general implications for crystallization behaviour , 1978 .