A Fast and Accurate Loss Model of Converter-Fed Induction Motor in Central Air-Conditioning System

In the traditional optimization model of central air-conditioner, the loss model of converter-fed motor is very rough, resulting in a large amount of energy waste. In this paper, a new energy loss model of central air-conditioning system from power to client is proposed. In the establishment of the loss model, the characteristics of pump load and variable frequency speed regulation are fully considered, and the electromagnetic variables which are difficult to be collected are replaced by the motor speed which can be directly calculated, so that the motor loss model can be introduced into the optimization model of the central air-conditioning system. A 5.5 kW converter-fed induction motor is tested under different speeds and loads, and the two-dimensional (2-D) loss data were obtained. Then, one-dimensional data were extracted from the measured 2-D data combined with the load characteristics of the pump, and compared with the calculated values of the proposed model in this article. The results show that the proposed loss model is of good accuracy and versatility. Because the proposed analytical model only needs the variable of motor speed to accurately estimate the losses, it can be easily applied to the optimization of central air-conditioning system.

[1]  A. G. Yepes,et al.  Online Control Strategy for Tolerating Resistance Asymmetry With Minimum Copper Loss in the Full Torque Range for Symmetrical Six-Phase AC Drives , 2023, IEEE Transactions on Power Electronics.

[2]  Jian Li,et al.  Strategy of Synchronized SVPWM for Dual Three-Phase Machines in Full Modulation Range , 2022, IEEE Transactions on Power Electronics.

[3]  Mingzhi He,et al.  Fault-Tolerant Control of Dual Three-Phase PMSM Drives With Minimized Copper Loss , 2021, IEEE Transactions on Power Electronics.

[4]  Li Yu,et al.  Copper Loss Optimization Based on Bidirectional Converter for Doubly Salient Brushless Starter/Generator System , 2021, IEEE Transactions on Industrial Electronics.

[5]  Shengwei Wang,et al.  A real-time optimal control strategy for multi-zone VAV air-conditioning systems adopting a multi-agent based distributed optimization method , 2021 .

[6]  Yongsu Han,et al.  Reactive-Power-Based Robust MTPA Control for v/f Scalar-Controlled Induction Motor Drives , 2021, IEEE Transactions on Industrial Electronics.

[7]  A. G. Yepes,et al.  Strategy With Smooth Transitions and Improved Torque–Speed Region and Stator Copper Loss for Two-Level Asymmetrical Six-Phase Induction Motor Drives Under Switch Faults , 2021, IEEE Transactions on Power Electronics.

[8]  Wei Hua,et al.  Improved Loss Minimization Control for IPMSM Using Equivalent Conversion Method , 2021, IEEE Transactions on Power Electronics.

[9]  Syed Asad Hussain,et al.  Adaptive regression model-based real-time optimal control of central air-conditioning systems , 2020 .

[10]  Yu Shen,et al.  Energy consumption optimization of central air-conditioning based on sequential-least-square-programming , 2020, 2020 Chinese Control And Decision Conference (CCDC).

[11]  Jia Deng,et al.  Loss-Minimization Strategy of Nonsinusoidal Back EMF PMSM in Multiple Synchronous Reference Frames , 2020, IEEE Transactions on Power Electronics.

[12]  Can Cui,et al.  An energy-saving oriented air balancing method for demand controlled ventilation systems with branch and black-box model , 2020, Applied Energy.

[13]  Jianguo Zhu,et al.  Power Loss and Thermal Analysis for High-Power High-Speed Permanent Magnet Machines , 2020, IEEE Transactions on Industrial Electronics.

[14]  M. Dou,et al.  A Novel Current Solution for Torque Ripple Suppression of BLDCM With Minimal Rotor Eddy-Current Loss , 2020, IEEE Transactions on Power Electronics.

[15]  Gaolin Wang,et al.  Overmodulation Strategy for Electrolytic Capacitorless PMSM Drives: Voltage Distortion Analysis and Boundary Optimization , 2020, IEEE Transactions on Power Electronics.

[16]  Roy Barth,et al.  Introduction to New IEEE and CSA Standards: Detailed Requirements in the Skin-Effect Trace Heating Certification Process , 2020, IEEE Industry Applications Magazine.

[17]  Fang Zhang,et al.  Evaluating energy supply service reliability for commercial air conditioning loads from the distribution network aspect , 2019, Applied Energy.

[18]  Jinfeng Liu,et al.  Adaptive modeling for reliability in optimal control of complex HVAC systems , 2019, Building Simulation.

[19]  Manfeng Dou,et al.  Effects of Stator Iron Loss and Current-Loop Delay on Copper-Loss-Minimizing Torque Control of BLDCM: Analysis and Improvements , 2019, IEEE Transactions on Power Electronics.

[20]  Gustavo de Novaes Pires Leite,et al.  An economic analysis of the integration between air-conditioning and solar photovoltaic systems , 2019, Energy Conversion and Management.

[21]  Paavo Rasilo,et al.  Simulink Model for PWM-Supplied Laminated Magnetic Cores Including Hysteresis, Eddy-Current, and Excess Losses , 2019, IEEE Transactions on Power Electronics.

[22]  Thomas X. Wu,et al.  An Analytical Iron Loss Calculation Model of Inverter-Fed Induction Motors Considering Supply and Slot Harmonics , 2019, IEEE Transactions on Industrial Electronics.

[23]  Thomas Wu,et al.  A Fast Identification Method for Rotor Flux Density Harmonics and Resulting Rotor Iron Losses of Inverter-Fed Induction Motors , 2018, IEEE Transactions on Industrial Electronics.

[24]  V. Agarwal,et al.  Trajectory Optimization for Loss Minimization in Induction Motor Fed Elevator Systems , 2018, IEEE Transactions on Power Electronics.

[25]  Gm. Shafiullah,et al.  Modeling techniques used in building HVAC control systems: A review , 2017 .

[26]  Wenping Cao,et al.  Power Loss and Thermal Analysis of a MW High-Speed Permanent Magnet Synchronous Machine , 2017, IEEE Transactions on Energy Conversion.

[27]  Lassi Aarniovuori,et al.  Converter-Fed Induction Motor Efficiency: Practical Applicability of IEC Methods , 2017, IEEE Industrial Electronics Magazine.

[28]  Vishal Verma,et al.  Cascaded Multilevel Active Rectifier Fed Three-Phase Smart Pump Load on Single-Phase Rural Feeder , 2017, IEEE Transactions on Power Electronics.

[29]  Giovanni Bucci,et al.  Erratum to "Uncertainty Issues in Direct and Indirect Efficiency Determination for Three-Phase Induction Motors: Remarks About the IEC 60034-2-1 Standard" , 2017, IEEE Trans. Instrum. Meas..

[30]  Yoonjae Kim,et al.  Copper-Loss-Minimizing Field Current Control Scheme for Wound Synchronous Machines , 2017, IEEE Transactions on Power Electronics.

[31]  Xu Guorui,et al.  Piecewise Variable Parameter Loss Model of Laminated Steel and Its Application in Fine Analysis of Iron Loss of Inverter-Fed Induction Motors , 2016, IEEE Transactions on Industry Applications.

[32]  Vahid Dargahi,et al.  Analytical Determination of Conduction and Switching Power Losses in Flying-Capacitor-Based Active Neutral-Point-Clamped Multilevel Converter , 2016, IEEE Transactions on Power Electronics.

[33]  Andrew Kusiak,et al.  Predictive modeling and optimization of a multi-zone HVAC system with data mining and firefly algorithms , 2015 .

[34]  Fu Xiao,et al.  An online adaptive optimal control strategy for complex building chilled water systems involving intermediate heat exchangers , 2013 .

[35]  A. Boglietti,et al.  Fast Method for the Iron Loss Prediction in Inverter-Fed Induction Motors , 2010, IEEE Transactions on Industry Applications.

[36]  A.K. Gupta,et al.  A general space vector PWM algorithm for multilevel inverters, including operation in overmodulation range , 2007, IEEE International Conference on Electric Machines and Drives, 2005..

[37]  Tomonobu Senjyu,et al.  Investigation of influences of various losses on electromagnetic torque for surface-mounted permanent magnet synchronous motors , 2003 .

[38]  Thomas Wu,et al.  Core Loss Equivalent Resistance Modeling of Small- and Medium-Sized Converter-Fed Induction Motors Considering Supply and Spatial Harmonics , 2023, IEEE Transactions on Industrial Electronics.

[39]  Abhisek Ukil,et al.  Comparative Performance Analysis of Induction and Synchronous Reluctance Motors in Chiller Systems for Energy Efficient Buildings , 2019, IEEE Transactions on Industrial Informatics.