Mechanistic approach to predict real machining time for milling free-form geometries applying high feed rate

An accurate estimate of machining time is very important for predicting delivery time, manufacturing costs, and also to help production process planning. Most commercial CAM software systems estimate the machining time in milling operations simply by dividing the entire tool path length by the programmed feed rate. This time estimate differs drastically from the real process time because the feed rate is not always constant due to machine and computer numerical controlled (CNC) limitations. This study presents a practical mechanistic method for milling time estimation when machining free-form geometries. The method considers a variable called machine response time (MRT) which characterizes the real CNC machine’s capacity to move in high feed rates in free-form geometries. MRT is a global performance feature which can be obtained for any type of CNC machine configuration by carrying out a simple test. For validating the methodology, a workpiece was used to generate NC programs for five different types of CNC machines. A practical industrial case study was also carried out to validate the method. The results indicated that MRT, and consequently, the real machining time, depends on the CNC machine’s potential: furthermore, the greater MRT, the larger the difference between predicted milling time and real milling time. The proposed method achieved an error range from 0.3% to 12% of the real machining time, whereas the CAM estimation achieved from 211% to 1244% error. The MRT-based process is also suggested as an instrument for helping in machine tool benchmarking.

[1]  Ming-Jen Kuo,et al.  NURBS machining and feed rate adjustment for high-speed cutting of complex sculptured surfaces , 2001 .

[2]  Chih-Ching Lo,et al.  CNC machine tool interpolator with path compensation for repeated contour machining , 1998, Comput. Aided Des..

[3]  Ciro A. Rodríguez,et al.  Influence of tool path strategy on the cycle time of high-speed milling , 2003, Comput. Aided Des..

[4]  Thorsten Finzer.  High Speed Machining (HSC) of Sculptured Surfaces in Die and Mold Manufacturing , 1998, SSM.

[5]  Rida T. Farouki,et al.  Performance analysis of CNC interpolators for time-dependent feedrates along PH curves , 2001, Comput. Aided Geom. Des..

[6]  Takeshi Yasui,et al.  NC program evaluator for higher machining productivity , 1999 .

[7]  Jürgen Geist.  Influence of HSC-appropriate machining parameters on NC programming , 1999 .

[8]  Reginaldo Teixeira Coelho,et al.  Experimental investigation of feed rate limitations on high speed milling aimed at industrial applications , 2007 .

[9]  Yusuf Altintas,et al.  Manufacturing Automation: Metal Cutting Mechanics, Machine Tool Vibrations, and CNC Design , 2000 .

[10]  D. Renton,et al.  High speed servo control of multi-axis machine tools , 2000 .

[11]  Yoram Koren,et al.  Control of Machine Tools , 1997 .

[12]  Jean-Yves Hascoët,et al.  Development of a machining simulator considering machine behaviour , 2003 .

[13]  Eun Young Heo,et al.  Estimation of NC machining time using NC block distribution for sculptured surface machining , 2006 .

[14]  Chih-Ching Lo,et al.  CNC machine tool surface interpolator for ball-end milling of free-form surfaces , 2000 .

[15]  Miles Arnone,et al.  High Performance Machining , 1998 .

[16]  M. Boujelbene,et al.  Productivity enhancement in dies and molds manufacturing by the use of C1 continuous tool path , 2004 .