A Review on Utilization of Waste Material as Reinforcement in MMCs

The application of waste material in Metal Matrix C omposites has been getting more attention as they c an reinforce particles in metal matrix which enhance th strength properties of the composites. In additio n, by applying these wastes materials in useful way not only save th e manufacturing cost of products but also reduce th e pollutions on environment. This paper represents a literature review on a range of waste materials from different sources and their utilization in metal matrix composites. The p aper describes the synthesis methods of waste filled m tal matrix composite materials and their mechanical, wear, corr osion, and physical properties. It also highlights t e application composites in aerospace, automotive and other const ruction industries.

[1]  Raju,et al.  Thermal Properties of Aluminium-Fly AshComposite , 2014 .

[2]  K. Alaneme,et al.  Corrosion and wear behaviour of rice husk ash—Alumina reinforced Al–Mg–Si alloy matrix hybrid composites , 2013 .

[3]  Agunsoye J. Olumuyiwa,et al.  Study of Mechanical Behaviour of Coconut Shell Reinforced Polymer Matrix Composite , 2012 .

[4]  S. Hong,et al.  Microstructures and thermal properties of A356/SiCp composites fabricated by liquid pressing method , 2012 .

[5]  Ahmet Karaaslan,et al.  Processing and microstructural characterisation of AA 1070 and AA 6063 matrix B4Cp reinforced composites , 2010 .

[6]  T. R. Vijayaram,et al.  Processing and characterisation of particulate reinforced aluminium silicon matrix composite , 2007 .

[7]  S. Hannula,et al.  Abrasive wear properties of metal matrix composites produced by hot isostatic pressing , 2006, Proceedings of the Estonian Academy of Sciences. Engineering.

[8]  R. Gadelrab,et al.  The effects of aging on the hardness and fatigue behavior of 2024 Al alloy/SiC composites , 2002 .

[9]  C. Cayron,et al.  Microstructure and mechanical properties of a high volume fraction SiC particle reinforced AlCu4MgAg squeeze casting , 1999 .

[10]  S. Saravanan,et al.  Mechanical Behavior of Aluminum (AlSi10Mg)-RHA Composite , 2014 .

[11]  S. I. Talabi,et al.  The Effects of Cocos Nucifera (Coconut Shell) on the Mechanical and Tribological Properties of Recycled Waste Aluminium Can Composites , 2014 .

[12]  P. M. Sonawane,et al.  Preparation of Aluminium Matrix Composite by using Stir Casting Method & it's Characterization , 2014 .

[13]  S. Durowaye,et al.  Mechanical Properties of Particulate Coconut Shell and Palm Fruit Polyester Composites , 2014 .

[14]  A. Mittal,et al.  Fabrication and characterization of Mechanical Properties of Al-RHA-Cu Hybrid Metal Matrix Composites , 2013 .

[15]  B. SaddamHussain.,et al.  DYNAMIC BEHAVIOUR OF HYBRID ALUMINIUM6061 METAL MATRIX REINFORCED WITH SIC AND FLY ASH PARTICULATES. , 2013 .

[16]  Journals Iosr,et al.  A Study on Mechanical Properties of Fly Ash and Alumina Reinforced Aluminium Alloy (LM25) Composites. , 2013 .

[17]  R. K. Srivastava,et al.  Tribological Behaviour of Al-6061 / SiC Metal Matrix Composite by Taguchi's Techniques , 2012 .

[18]  V. Aigbodion.  Development of Al-Si-Fe/Rice husk ash particulate composites synthesis by double stir casting method , 2012 .

[19]  D. Prasad,et al.  Production and Mechanical Properties of A356.2 /RHA Composites , 2011 .