Evolutions during synthesis of Al-AlN-nanostructured composite powder by mechanical alloying

[1]  G. Campbell,et al.  Compaction behavior of uniaxially cold-pressed Bi–Ta composites , 2007 .

[2]  A. Simchi,et al.  An investigation on the compressibility of aluminum/nano-alumina composite powder prepared by blending and mechanical milling , 2007 .

[3]  M. Gu,et al.  An investigation of micro-galvanic corrosion in Al/AlNp composites , 2007 .

[4]  Elisa Maria Ruiz-Navas,et al.  One step production of aluminium matrix composite powders by mechanical alloying , 2006 .

[5]  J. Torralba,et al.  Influence of milling time on the processing of Fe–TiCN composites , 2006 .

[6]  A. Simchi,et al.  Structural evolution during mechanical milling of nanometric and micrometric Al2O3 reinforced Al matrix composites , 2006 .

[7]  J. Torralba,et al.  Mechanically alloyed AlN particle-reinforced Al-6061 matrix composites: Powder processing, consolidation and mechanical strength and hardness of the as-extruded materials , 2006 .

[8]  Linan An,et al.  Synthesis and characterization of high volume fraction Al-Al2O3 nanocomposite powders by high-energy milling , 2006 .

[9]  Seyed Mojtaba Zebarjad,et al.  Microstructure evaluation of Al-Al2O3 composite produced by mechanical alloying method , 2006 .

[10]  N. Zhao,et al.  The effect of mechanical alloying on SiC distribution and the properties of 6061 aluminum composite , 2005 .

[11]  F. G. Cuevas,et al.  High-strength PM aluminium by milling in ammonia gas and sintering , 2005 .

[12]  S. Chan,et al.  Tensile properties of nanometric Al2O3 particulate-reinforced aluminum matrix composites , 2004 .

[13]  J. Heinrich,et al.  Investigation of microstructural evolution during nitridation of aluminium using simultaneous thermal analysis , 2004 .

[14]  E. Sánchez,et al.  Mechanical characterisation of AA7015 aluminium alloy reinforced with ceramics , 2003 .

[15]  J. Schoenung,et al.  Mechanisms of microstructure evolution during cryomilling in the presence of hard particles , 2003 .

[16]  J. Torralba,et al.  The effects of mechanical alloying on the compressibility of aluminium matrix composite powder , 2003 .

[17]  M. Zawrah,et al.  Microstructure and hardness of nanostructured Al–Fe–Cr–Ti alloys through mechanical alloying , 2003 .

[18]  J. Heinrich,et al.  Correlation between nitriding process and microstructure of reaction bonded aluminium nitride ceramics , 2003 .

[19]  E. J. Herrera,et al.  Sintering of Al/AlN composite powder obtained by gas–solid reaction milling , 2003 .

[20]  C. Suryanarayana,et al.  Homogeneous dispersion of graphite in a 6061 aluminum alloy by ball milling , 2003 .

[21]  Y. S. Lee,et al.  Microstructural Evolution in Al/AlN Composites Processed by Mechanical Alloying , 2003 .

[22]  José M. Torralba,et al.  Effect of mechanical alloying on the morphology, microstructure and properties of aluminium matrix composite powders , 2003 .

[23]  P. J. Denny.  Compaction equations: a comparison of the Heckel and Kawakita equations , 2002 .

[24]  J. Torralba,et al.  6061 Al reinforced with silicon nitride particles processed by mechanical milling , 2002 .

[25]  Jow-Lay Huang,et al.  The mechanical properties of AlN/Al composites manufactured by squeeze casting , 2002 .

[26]  P. Delcroix,et al.  Mechanical alloying during cryomilling of a 5000 Al alloy/AlN powder: the effect of contamination , 2001 .

[27]  Frédéric Bernard,et al.  Cryomilling of Al/AlN powders , 1999 .

[28]  R. Panelli,et al.  Compaction of AISI M2+10%vol. NbC Processed by High Energy Mill , 1998 .

[29]  M. El-Eskandarany,et al.  Mechanical solid state mixing for synthesizing of SiCp/Al nanocomposites , 1998 .

[30]  George E. Kim,et al.  The properties and microstructure of Al-based composites reinforced with ceramic particles , 1998 .

[31]  M. G. Norton,et al.  X-Ray diffraction : a practical approach , 1998 .

[32]  P. Joubert,et al.  Elaboration and characterization of a metal matrix composite: Al/AlN , 1997 .

[33]  P. Verdier,et al.  AlN dispersed reinforced aluminum composite , 1997 .

[34]  G. L’espérance,et al.  Effect of volume fraction of ain particle on superplasticity of AlN/6061 aluminum alloy composite , 1996 .

[35]  G. L’espérance,et al.  High strain rate superplasticity of AlN particulate reinforced aluminium alloy composites , 1994 .

[36]  D. Chung,et al.  Fabrication of particulate aluminium-matrix composites by liquid metal infiltration , 1994, Journal of Materials Science.