Experimental characterization of in-plane permeability of gas diffusion layers

[1]  Suresh G. Advani,et al.  On the relative influence of convection in serpentine flow fields of PEM fuel cells , 2006 .

[2]  Brant A. Peppley,et al.  Modeling the Influence of GDL and flow-field plate parameters on the reaction distribution in the PEMFC cathode catalyst layer , 2005 .

[3]  J. Pharoah.  On the permeability of gas diffusion media used in PEM fuel cells , 2005 .

[4]  James J. McGuirk,et al.  2D and 3D Modeling of a PEMFC Cathode with Interdigitated Gas Distributors , 2005 .

[5]  Minkmas V. Williams,et al.  Influence of Convection Through Gas-Diffusion Layers on Limiting Current in PEM FCs Using a Serpentine Flow Field , 2004 .

[6]  Jianren Fan,et al.  Three-dimensional numerical analysis of proton exchange membrane fuel cells (PEMFCs) with conventional and interdigitated flow fields , 2004 .

[7]  P. Wilde,et al.  Structural and Physical Properties of GDL and GDL/BPP Combinations and their Influence on PEMFC Performance , 2004 .

[8]  T. Zawodzinski,et al.  Permeability and Wettability Measurements for Gas Diffusion Layers for PEM Fuel Cells , 2004 .

[9]  Hubert A. Gasteiger,et al.  Handbook of fuel cells : fundamentals technology and applications , 2003 .

[10]  James M. Fenton,et al.  Characterization of Gas Diffusion Layers for PEMFC , 2004 .

[11]  A. Jena,et al.  An innovative technique for pore structure analysis of fuel cell and battery components using flow porometry , 2001 .

[12]  T. Nguyen,et al.  Two-phase flow model of the cathode of PEM fuel cells using interdigitated flow fields , 2000 .

[13]  J. W. Van Zee,et al.  The effects of compression and gas diffusion layers on the performance of a PEM fuel cell , 1999 .

[14]  Trung Van Nguyen,et al.  A Gas Distributor Design for Proton‐Exchange‐Membrane Fuel Cells , 1996 .

[15]  Constantina Lekakou,et al.  Measurement techniques and effects on in-plane permeability of woven cloths in resin transfer moulding , 1996 .

[16]  Suresh G. Advani,et al.  Permeability characterization. Part 1: A proposed standard reference fabric for permeability , 1995 .

[17]  S. Advani,et al.  On Flow through Aligned Fiber Beds and Its Application to Composites Processing , 1992 .

[18]  Ludwig Rebenfeld,et al.  Permeability characteristics of multilayer fiber reinforcements. Part I: Experimental observations , 1991 .