Efficiency monitoring as a strategy for cost effective maintenance of induction motors for minimizing carbon emission and energy consumption

[1]  G. B. Kliman,et al.  Noninvasive detection of broken rotor bars in operating induction motors , 1988 .

[2]  Antonio J. Marques Cardoso,et al.  Inter-turn stator winding fault diagnosis in three-phase induction motors, by Park's Vector approach , 1997 .

[3]  H.A. Toliyat,et al.  A novel approach for broken rotor bar detection in cage induction motors , 1998, Conference Record of 1998 IEEE Industry Applications Conference. Thirty-Third IAS Annual Meeting (Cat. No.98CH36242).

[4]  Mehmet Akbaba.  Energy conservation by using energy efficient electric motors , 1999 .

[5]  W. T. Thomson,et al.  Current signature analysis to detect induction motor faults , 2001 .

[6]  W. T. Thomson,et al.  Motor Current Signature Analysis To Detect Faults In Induction Motor Drives - Fundamentals, Data Interpretation, And Industrial Case Histories. , 2003 .

[7]  S. A. McInerny,et al.  Basic vibration signal processing for bearing fault detection , 2003, IEEE Trans. Educ..

[8]  S. Sujitjorn,et al.  Numerical approach to loss minimization in an induction motor , 2004 .

[9]  Paresh Girdhar.  Practical Machinery Vibration Analysis and Predictive Maintenance , 2004 .

[10]  H.A. Toliyat,et al.  Condition Monitoring and Fault Diagnosis of Electrical Motors—A Review , 2005, IEEE Transactions on Energy Conversion.

[11]  C. Chat-uthai,et al.  Energy Management Program for Use of Induction Motors Based on Efficiency Prediction , 2005, TENCON 2005 - 2005 IEEE Region 10 Conference.

[12]  T.G. Habetler,et al.  A survey of efficiency-estimation methods for in-service induction motors , 2006, IEEE Transactions on Industry Applications.

[13]  Alexandre Szklo,et al.  Energy-efficiency standards for electric motors in Brazilian industry , 2007 .

[14]  Benoît Iung,et al.  Formalisation of a new prognosis model for supporting proactive maintenance implementation on industrial system , 2008, Reliab. Eng. Syst. Saf..

[15]  Thomas G. Habetler,et al.  A Survey on Testing and Monitoring Methods for Stator Insulation Systems of Low-Voltage Induction Machines Focusing on Turn Insulation Problems , 2008, IEEE Transactions on Industrial Electronics.

[16]  A.T. de Almeida,et al.  Electric motor standards, ecodesign and global market transformation , 2008, 2008 IEEE/IAS Industrial and Commercial Power Systems Technical Conference.

[17]  T.G. Habetler,et al.  A survey of testing and monitoring methods for stator insulation systems in induction machines , 2008, 2008 International Conference on Condition Monitoring and Diagnosis.

[18]  Saad Mekhilef,et al.  Energy and emission analysis for industrial motors in Malaysia , 2009 .

[19]  Enrico Zio,et al.  A neuro-fuzzy technique for fault diagnosis and its application to rotating machinery , 2009, Reliab. Eng. Syst. Saf..

[20]  Haji Hassan Masjuki,et al.  End-use energy analysis in the Malaysian industrial sector , 2009 .

[21]  Gang Niu,et al.  Development of an optimized condition-based maintenance system by data fusion and reliability-centered maintenance , 2010, Reliab. Eng. Syst. Saf..

[22]  Benoît Iung,et al.  Generic prognosis model for proactive maintenance decision support: application to pre-industrial e-maintenance test bed , 2010, J. Intell. Manuf..

[23]  Ezio Bassi,et al.  Stator Current and Motor Efficiency as Indicators for Different Types of Bearing Faults in Induction Motors , 2010, IEEE Transactions on Industrial Electronics.

[24]  Binay Kumar Ray,et al.  Decomposition of energy consumption and energy intensity in Indian manufacturing industries , 2010 .

[25]  Teuku Meurah Indra Mahlia,et al.  Cost efficiency analysis and emission reduction by implementation of energy efficiency standards for electric motors , 2010 .

[26]  Rahman Saidur,et al.  A review on electrical motors energy use and energy savings , 2010 .

[27]  Nasrudin Abd Rahim,et al.  Analysis of electrical motors load factors and energy savings in an Indian cement industry , 2011 .

[28]  Nasrudin Abd Rahim,et al.  Energy savings and emissions reductions for rewinding and replacement of industrial motor , 2011 .

[29]  John Psarras,et al.  An integrated system for buildings’ energy-efficient automation: Application in the tertiary sector , 2013 .

[30]  Jose A. Antonino-Daviu,et al.  Use of the infrared data for heating curve computation in induction motors: Application to fault diagnosis , 2013 .

[31]  Nishchal K. Verma,et al.  Cost Benefit Analysis for condition based maintenance , 2013, 2013 IEEE Conference on Prognostics and Health Management (PHM).

[32]  Siaw Kiang Chou,et al.  Achieving better energy-efficient air conditioning - A review of technologies and strategies , 2013 .

[33]  Mehmet Bayram Yildirim,et al.  Integrated maintenance and production planning with energy consumption and minimal repair , 2014 .

[34]  Ramesh C. Bansal,et al.  A Motor Management Strategy for Optimising Energy Use and Reducing Life Cycle Costs , 2014 .

[35]  Osman Bilgin,et al.  Efficiency Analysis of Submersible Induction Motor with Broken Rotor Bar , 2014 .

[36]  Benoît Iung,et al.  Advanced maintenance services for promoting sustainability , 2014 .

[37]  Hong-Bae Jun,et al.  On condition based maintenance policy , 2015, J. Comput. Des. Eng..

[38]  Sun-Jin Yun,et al.  An analysis of the electricity consumption reduction potential of electric motors in the South Korean manufacturing sector , 2015 .

[39]  Luca Zarri,et al.  Online Detection of High-Resistance Connections With Negative-Sequence Regulators in Three-Phase Induction Motor Drives , 2015, IEEE Transactions on Industry Applications.

[40]  Nong Zhang,et al.  Design, implementation and characterization of a novel bi-directional energy conversion system on DC motor drive using super-capacitors , 2015 .

[41]  Mingsheng Liu,et al.  A novel method to determine the motor efficiency under variable speed operations and partial load conditions , 2015 .

[42]  Phuc Do,et al.  Prognostics on energy efficiency performance for maintenance decision-making: Application to industrial platform TELMA , 2015, 2015 Prognostics and System Health Management Conference (PHM).

[43]  Phil Scarf,et al.  Condition-based maintenance for a two-component system with dependencies , 2015 .

[44]  Mohamed Benbouzid,et al.  Induction machine faults detection using stator current parametric spectral estimation , 2015 .

[45]  Antoine Grall,et al.  A modeling framework for deteriorating control system and predictive maintenance of actuators , 2015, Reliab. Eng. Syst. Saf..

[46]  Luca Zarri,et al.  Online Detection of High-Resistance Connections in Multiphase Induction Machines , 2015, IEEE Transactions on Power Electronics.

[47]  Gurmeet Singh,et al.  Induction motor inter turn fault detection using infrared thermographic analysis , 2016 .

[48]  Shyi-Min Lu,et al.  A review of high-efficiency motors: Specification, policy, and technology , 2016 .

[49]  Yi Cao,et al.  Combination of process and vibration data for improved condition monitoring of industrial systems working under variable operating conditions , 2016 .

[50]  Buyung Kosasih,et al.  Acoustic emission-based condition monitoring methods: Review and application for low speed slew bearing , 2016 .

[51]  Benoît Iung,et al.  Investigation on the use of energy efficiency for condition-based maintenance decision-making , 2016 .

[52]  Cristina Castejón,et al.  Automatic condition monitoring system for crack detection in rotating machinery , 2016, Reliab. Eng. Syst. Saf..

[53]  Adam Glowacz,et al.  Diagnostics of Rotor Damages of Three-Phase Induction Motors Using Acoustic Signals and SMOFS-20-EXPANDED , 2016 .

[54]  Adam Glowacz,et al.  Diagnostics of stator faults of the single-phase induction motor using thermal images, MoASoS and selected classifiers , 2016 .

[55]  Gurmeet Singh,et al.  Fault diagnosis of induction motor cooling system using infrared thermography , 2016, 2016 IEEE 6th International Conference on Power Systems (ICPS).

[56]  Gurmeet Singh,et al.  Effectiveness of vibration and current monitoring in detecting broken rotor bar and bearing faults in an induction motor , 2016, 2016 IEEE 6th International Conference on Power Systems (ICPS).

[57]  Xiaohua Xia,et al.  Optimal and energy efficient operation of conveyor belt systems with downhill conveyors , 2017 .

[58]  Mohammadreza Tahan,et al.  Performance-based health monitoring, diagnostics and prognostics for condition-based maintenance of gas turbines: A review , 2017 .

[59]  Annette Muetze,et al.  Analysis of the Vibration Magnitude of an Induction Motor With Different Numbers of Broken Bars , 2017, IEEE Transactions on Industry Applications.

[60]  Gurmeet Singh,et al.  Broken Rotor Bar Fault Diagnosis in VFD Driven Induction Motors by an Improved Vibration Monitoring Technique , 2017 .

[61]  Adam Glowacz,et al.  Diagnosis of stator faults of the single-phase induction motor using acoustic signals , 2017 .

[62]  Gurmeet Singh,et al.  Infrared thermography based diagnosis of inter-turn fault and cooling system failure in three phase induction motor , 2017 .

[63]  Martin Valtierra-Rodriguez,et al.  Correlation Model Between Voltage Unbalance and Mechanical Overload Based on Thermal Effect at the Induction Motor Stator , 2017, IEEE Transactions on Energy Conversion.

[64]  Cássio Tersandro de Castro Andrade,et al.  Economic analysis of Brazilian policies for energy efficient electric motors , 2017 .

[65]  Phuc Do,et al.  Energy efficiency performance-based prognostics for aided maintenance decision-making: Application to a manufacturing platform , 2017 .

[66]  Adam Glowacz,et al.  Diagnosis of the three-phase induction motor using thermal imaging , 2017 .

[67]  International Journal of Prognostics and Health Management, ISSN 2153-2648, 2015 007 Effectiveness of vibration monitoring in the health assessment of induction motor , 2020 .