Compression Characteristics and Energy Requirement of Briquettes Made from a Mixture of Corn Stover and Peanut Shells

Corn stover and peanut shells are both abundantly available biomass feedstocks in China. To determine the compression characteristics and energy requirement of briquettes, mixtures of the corn stover and peanut shells were compressed under three different pressures (30, 60, and 90 MPa) with three moisture contents (9%, 14%, and 19%, wet basis) and five corn stover-peanut shell mixtures (0%-100%, 25%-75%, 50%-50%, 75%-25%, and 100%-0%) by mass. The results showed that applied pressure, moisture content, and the corn stover-peanut shell mixture all significantly affected briquette density and specific energy consumption. The density of the briquette ranged from 646 to 1052 kg/m3 and the specific energy consumption varied from 6.6 to 25.1 MJ/t. A moisture content of 9% was found to be better for the compression of the corn stover and peanut shells mixture. Adding peanut shells to the corn stover improved briquette density and reduced the specific energy consumption. Linear models were developed to describe the briquette density and the specific energy consumption. The briquette durability ranged from 57% to 94% and durable briquettes can be obtained when corn stover and peanut shells are compressed with the mixing ratio of 1:1 (50%-50%) at moisture content of 9%.

[1]  S. D. Probert,et al.  The briquetting of wheat straw , 1977 .

[2]  Ashutosh Kumar Singh,et al.  Compression of fractionated sun-cured and dehydrated alfalfa chops into cubes--specific energy models. , 2007, Bioresource technology.

[3]  J. Berghel,et al.  Energy Efficient Pilot-Scale Production of Wood Fuel Pellets made from a Raw Material Mix Including Sawdust and Rapeseed Cake , 2011 .

[4]  José Luis Míguez,et al.  Fuel lignocellulosic briquettes, die design and products study , 2002 .

[5]  R. .. Morey,et al.  Factors affecting strength and durability of densified biomass products. , 2009 .

[6]  Wayne Coates,et al.  Using cotton plant residue to produce briquettes , 2000 .

[7]  Yan Yu,et al.  The properties of pellets from mixing bamboo and rice straw , 2013 .

[8]  S. Sokhansanj,et al.  Grinding performance and physical properties of wheat and barley straws, corn stover and switchgrass , 2004 .

[9]  Henry Waelti,et al.  Cubability of Rice Straw as Affected by Various Binders , 1973 .

[10]  Richard E. Lund,et al.  Tables for An Approximate Test for Outliers in Linear Models , 1975 .

[11]  M.J.A. van den Oever,et al.  Process for production of high density/high performance binderless boards from whole coconut husk: Part 1: Lignin as intrinsic thermosetting binder resin , 2004 .

[12]  S. Sokhansanj,et al.  Effects of compressive force, particle size and moisture content on mechanical properties of biomass pellets from grasses , 2006 .

[13]  Lope G. Tabil,et al.  Effect of compressive load and particle size on compression characteristics of selected varieties of wheat straw grinds. , 2014 .

[14]  M. Shaw Feedstock and process variables influencing biomass densification , 2008 .

[15]  O. Fasina PHYSICAL PROPERTIES OF PEANUT HULL PELLETS , 2007 .

[16]  Li Xing,et al.  Renewable energy from agro-residues in China: Solid biofuels and biomass briquetting technology , 2009 .

[17]  M. J. O'Dogherty,et al.  Compression of straw to high densities in closed cylindrical dies , 1984 .

[18]  J. R. Hess,et al.  A review of biomass densification systems to develop uniform feedstock commodities for bioenergy application , 2011 .

[19]  Lope G. Tabil,et al.  Compaction of Corn Stover , 2004 .

[20]  R. .. Morey,et al.  Densification Characteristics of Corn Stover and Switchgrass , 2009 .

[21]  S. Sokhansanj,et al.  Specific energy requirement for compacting corn stover. , 2006, Bioresource technology.