论文信息 - A digitally programmable polyphase filter for Bluetooth

A digitally programmable polyphase filter for Bluetooth

A new polyphase filter for implementing the channel select filter for Bluetooth low-IF receiver is presented. It is based on the simplest type of active elements namely current and voltage followers. The center frequency is digitally tuned through programming active current division networks. Experimental results obtained from a 6th-order fully differential filter fabricated in a 0.35µm CMOS chip are provided.

Hussain A. Alzaher | Noman A. Tasadduq

[1] H. Sjoland,et al. A polyphase filter based on CMOS inverters , 2005, 2005 NORCHIP.

[2] Edgar Sanchez-Sinencio,et al. A pseudo differential complex filter for Bluetooth with frequency tuning , 2003, IEEE Trans. Circuits Syst. II Express Briefs.

[3] Alberto Valdes-Garcia,et al. Chameleon: a dual-mode 802.11b/Bluetooth receiver system design , 2006, IEEE Transactions on Circuits and Systems I: Regular Papers.

[4] Mahmut Ün. Implementation of Polyphase Filter Section with CFAs , 2004 .

[5] Pietro Andreani,et al. A 57-dB image band rejection CMOS G/sub m/-C polyphase filter with automatic frequency tuning for Bluetooth , 2002, 2002 IEEE International Symposium on Circuits and Systems. Proceedings (Cat. No.02CH37353).

[6] Hussain A. Alzaher. A CMOS Digitally Programmable Universal Current-Mode Filter , 2008, IEEE Transactions on Circuits and Systems II: Express Briefs.

[7] H. A. Alzaher,et al. A CMOS highly linear channel-select filter for 3G multistandard integrated wireless receivers , 2002 .

[8] Ahmed M. Soliman,et al. Low-Voltage digitally controlled fully differential current conveyor , 2005, IEEE Transactions on Circuits and Systems I: Regular Papers.

[9] Noriyoshi Kambayashi,et al. A Realization of Active Current-Mode Resonator with Complex Coefficients Using CCIIs , 1997 .