Real Time Investigation of the Interface between a P3HT:PCBM Layer and an Al Electrode during Thermal Annealing.

Real time variation of the interfacial structure between an Al electrode and a poly(3-hexylthiophene) (P3HT):fullerene (PCBM) thin film during thermal annealing has been investigated using synchrotron X-rays. It is found that Al atoms diffuse into the organic layer to form a thin interlayer between the Al electrode and the organic layer even during the deposition of an Al layer. The interlayer thickness and the mass density of the interlayer increases if annealed above 120 °C. The interlayer thickness depends on the annealing processes and the inter-diffusion is accelerated by a fast annealing process. The Al diffusion reduces the preferred alignment of the (100) direction of the P3HT crystals from the surface normal direction and randomizes their orientation. The Al diffusion also helps to reduce the contact resistance in the P3HT:PCBM-based solar cells.

[1]  Christoph J. Brabec,et al.  Organic photovoltaics: technology and market , 2004 .

[2]  Oliver Ambacher,et al.  Relation between absorption and crystallinity of poly(3-hexylthiophene)/fullerene films for plastic solar cells , 2006 .

[3]  Christoph J. Brabec,et al.  Correlation Between Structural and Optical Properties of Composite Polymer/Fullerene Films for Organic Solar Cells , 2005 .

[4]  Gang Li,et al.  Investigation of annealing effects and film thickness dependence of polymer solar cells based on poly(3-hexylthiophene) , 2005 .

[5]  L. Rothberg,et al.  Plasmon enhancement of bulk heterojunction organic photovoltaic devices by electrode modification , 2008 .

[6]  Harald Hoppe,et al.  Effect of annealing of poly(3-hexylthiophene)/fullerene bulk heterojunction composites on structural and optical properties , 2006 .

[7]  Vladimir Dyakonov,et al.  Influence of nanomorphology on the photovoltaic action of polymer–fullerene composites , 2004 .

[8]  Paul R. Berger,et al.  4.8% efficient poly(3-hexylthiophene)-fullerene derivative (1:0.8) bulk heterojunction photovoltaic devices with plasma treated AgOx/indium tin oxide anode modification , 2008 .

[9]  Sang-Jin Moon,et al.  The importance of post-annealing process in the device performance of poly(3-hexylthiophene): Methanofullerene polymer solar cell , 2007 .

[10]  C. Brabec,et al.  2.5% efficient organic plastic solar cells , 2001 .

[11]  Kenji Kawano,et al.  Open circuit voltage of stacked bulk heterojunction organic solar cells , 2006 .

[12]  N. S. Sariciftci,et al.  Polymer Solar Cells , 2011 .

[13]  Vishal Shrotriya,et al.  Efficient inverted polymer solar cells , 2006 .

[14]  Y. Geng,et al.  Effects of thermal annealing on polymer photovoltaic cells with buffer layers and in situ formation of interfacial layer for enhancing power conversion efficiency , 2008 .

[15]  Carole Sentein,et al.  Accelerated lifetime measurements of P3HT:PCBM solar cells , 2006 .

[16]  J. Ferraris,et al.  Temperature and time dependence of heat treatment of RR-P3HT/PCBM solar cell , 2005 .

[17]  Mario Leclerc,et al.  A calorimetric study of the phase transitions in poly(3-hexylthiophene) , 1995 .

[18]  Zhenan Bao,et al.  Effect of Mesoscale Crystalline Structure on the Field‐Effect Mobility of Regioregular Poly(3‐hexyl thiophene) in Thin‐Film Transistors , 2005 .

[19]  Niyazi Serdar Sariciftci,et al.  Effects of Annealing on the Nanomorphology and Performance of Poly(alkylthiophene):Fullerene Bulk‐Heterojunction Solar Cells , 2007 .

[20]  Vishal Shrotriya,et al.  Absorption spectra modification in poly(3-hexylthiophene):methanofullerene blend thin films , 2005 .

[21]  K. S. Narayan,et al.  Correlating reduced fill factor in polymer solar cells to contact effects , 2008 .

[22]  Xiong Gong,et al.  Thermally Stable, Efficient Polymer Solar Cells with Nanoscale Control of the Interpenetrating Network Morphology , 2005 .