Ultracapacitors self discharge modelling using a physical description of porous electrode impedance

The main goal of this paper is to establish a link between the ultracapacitors impedance at low frequency and slow phenomena such as self-discharge and charge recovery. Usually these phenomena are studied in the time domain. However, additional information can be extracted from specific characterization methods in the frequency domain like impedance spectroscopy. In this way, we intend to introduce an analytical method to characterize the ultracapacitors only by using impedance spectroscopy results and so to simplify some ultracapacitors tests like power cycling and calendar life tests. Firstly, we introduce a complete impedance model of ultracapacitor, which is based on the main physical behaviour in the porous electrodes and at the electrode- electrolyte interface. A specific identification method is used in order to determine the model parameters from the impedance spectroscopy results. This model has a good accuracy, especially in the low investigated frequency range [1 mHz,100 Hz]. Then, we focus only in the dynamic behaviour in the low frequency range using some justified simplifications. The link with voltage decay is discussed and validated by using experimental results of self-discharge tests. Then a mathematical relation is introduced in order to predict the self-discharge rate from impedance spectroscopy results. Finally, a time domain identification procedure of the ultracapacitors model is introduced. It allows obtaining an accurate model of the dynamic behavior without using the impedance spectroscopy. The proposed model has been validated thanks to experimental results. The validation tests have been performed using a large cell 2700F/2.7 V for a significant test duration. The results show a good agreement between measured and simulated results during the relaxation periods over few hours.

[1]  Wendy G. Pell,et al.  Self-discharge and potential recovery phenomena at thermally and electrochemically prepared RuO2 supercapacitor electrodes , 1997 .

[2]  R. Kötz,et al.  Principles and applications of electrochemical capacitors , 2000 .

[3]  R.W. De Doncker,et al.  Modeling the dynamic behavior of supercapacitors using impedance spectroscopy , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).

[4]  Dirk Uwe Sauer,et al.  Ageing behaviour of electrochemical double layer capacitors. Part I. Experimental study and ageing model , 2007 .

[5]  Cuong Ton-That,et al.  Self-discharge of carbon-based supercapacitors with organic electrolytes , 2000 .

[6]  Seung M. Oh,et al.  Complex Capacitance Analysis of Porous Carbon Electrodes for Electric Double-Layer Capacitors , 2004 .

[7]  Eric Woirgard,et al.  Quantification of ageing of ultracapacitors during cycling tests with current profile characteristics of hybrid and electric vehicles applications , 2007 .

[8]  B. Conway.  Electrochemical Supercapacitors: Scientific Fundamentals and Technological Applications , 1999 .

[9]  B. Conway,et al.  Diagnostic analyses for mechanisms of self-discharge of electrochemical capacitors and batteries , 1997 .

[10]  Thomas Christen,et al.  Theory of Ragone plots , 2000 .

[11]  A. Hollenkamp,et al.  Carbon properties and their role in supercapacitors , 2006 .

[12]  Seung M. Oh,et al.  Complex Capacitance Analysis on Leakage Current Appearing in Electric Double-layer Capacitor Carbon Electrode , 2005 .

[13]  Jean-Michel Vinassa,et al.  Characterization methods and modelling of ultracapacitors for use as peak power sources , 2007 .

[14]  Irene M. Plitz,et al.  A comparative study of Li-ion battery, supercapacitor and nonaqueous asymmetric hybrid devices for automotive applications , 2003 .