Synthesis and test of sorbents based on calcium aluminates for SE-SR
暂无分享,去创建一个
Linda Barelli | Gianni Bidini | F. Gallorini | A. Di Michele | Francesco Sacchetti | L. Barelli | G. Bidini | C. Petrillo | F. Sacchetti | F. Gallorini | Caterina Petrillo | A. D. Michele | A. Michele
[1] J. C. Abanades,et al. Conversion Limits in the Reaction of CO2 with Lime , 2003 .
[2] Production of hydrogen through the carbonation–calcination reaction applied to CH4/CO2 mixtures , 2007 .
[3] M. Morris,et al. The Rapid Formation of La(OH)3 from La2O3 Powders on Exposureto Water Vapor , 2010 .
[4] J. Carlos Abanades,et al. CO2 Capture Capacity of CaO in Long Series of Carbonation/Calcination Cycles , 2006 .
[5] Shuimu Wu,et al. CO2 capture performance of synthetic sorbent prepared from carbide slag and aluminum nitrate hydrate by combustion synthesis , 2015 .
[6] Xiaoping Chen,et al. Cyclic CO2 capture behavior of KMnO4-doped CaO-based sorbent , 2010 .
[7] B. Viana,et al. Comparative Study of Ni- and Co-Substituted ZnO Nanoparticles: Synthesis, Optical, and Magnetic Properties , 2011 .
[8] J. A. Ritter,et al. Nonequilibrium Kinetic Model That Describes the Reversible Adsorption and Desorption Behavior of CO2 in a K-Promoted Hydrotalcite-like Compound , 2007 .
[9] Jeffrey Raymond Hufton,et al. Sorption‐enhanced reaction process for hydrogen production , 1999 .
[10] Linda Barelli,et al. Study of the carbonation-calcination reaction applied to the hydrogen production from syngas , 2007 .
[11] Minghou Xu,et al. Performance Enhancement of Calcium Oxide Sorbents for Cyclic CO2 Capture—A Review , 2012 .
[12] Zhenmin Cheng,et al. Synthesis of CaO-based sorbents through incorporation of alumina/aluminate and their CO2 capture performance , 2012 .
[13] Chuguang Zheng,et al. Enhanced cyclic stability of CO2 adsorption capacity of CaO-based sorbents using La2O3 or Ca12Al14O33 as additives , 2011 .
[14] Christopher W. Jones,et al. Adsorbent materials for carbon dioxide capture from large anthropogenic point sources. , 2009, ChemSusChem.
[15] Zhi Ping Xu,et al. Influence of Water on High-Temperature CO2 Capture Using Layered Double Hydroxide Derivatives , 2008 .
[16] L. Barelli,et al. SE-SR with sorbents based on calcium aluminates: process optimization , 2015 .
[17] Qiang Wang,et al. CO2 capture by solid adsorbents and their applications: current status and new trends , 2011 .
[18] S. F. Wu,et al. Behavior of CaTiO3/Nano-CaO as a CO2 Reactive Adsorbent , 2010 .
[19] Paul S. Fennell,et al. The calcium looping cycle for large-scale CO2 capture , 2010 .
[20] Bo Feng,et al. Overcoming the Problem of Loss-in-Capacity of Calcium Oxide in CO2 Capture , 2006 .
[21] Bo Feng,et al. Synthesis of sintering-resistant sorbents for CO2 capture. , 2010, Environmental science & technology.
[22] Robin Irons,et al. Materials challenges for the development of solid sorbents for post-combustion carbon capture , 2012 .
[23] L. Barelli,et al. Hydrogen production through sorption-enhanced steam methane reforming and membrane technology : A review , 2008 .
[24] Edward J. Anthony,et al. On the Decay Behavior of the CO2 Absorption Capacity of CaO-Based Sorbents , 2005 .
[25] Angeliki A. Lemonidou,et al. Development of new CaO based sorbent materials for CO2 removal at high temperature , 2008 .
[26] Angeliki A. Lemonidou,et al. Parametric Study of the CaO−Ca12Al14O33 Synthesis with Respect to High CO2 Sorption Capacity and Stability on Multicycle Operation , 2008 .
[27] Changsui Zhao,et al. Cyclic calcination/carbonation looping of dolomite modified with acetic acid for CO2 capture , 2008 .
[28] P. Foscolo,et al. Carbon dioxide capture with dolomite: A model for gas–solid reaction within the grains of a particulate sorbent , 2009 .
[29] Bo Feng,et al. Calcium precursors for the production of CaO sorbents for multicycle CO2 capture. , 2010, Environmental science & technology.
[30] Ningsheng Cai,et al. Synthesis, experimental studies, and analysis of a new calcium-based carbon dioxide absorbent , 2005 .
[31] Zimin Nie,et al. MgAl2O4 Spinel-Stabilized Calcium Oxide Absorbents with Improved Durability for High-Temperature CO2 Capture , 2010 .
[32] Marco J. Castaldi,et al. Dispersed Calcium Oxide as a Reversible and Efficient CO2−Sorbent at Intermediate Temperatures , 2011 .