Outdoor Wood Mats-Based Engineering Composite: Influence of Process Parameters on Decay Resistance against Wood-Degrading Fungi Trametes versicolor and Gloeophyllum trabeum

The process parameters significantly influence the preparation and final properties of outdoor wood mats-based engineering composite (OWMEC). During outdoor use, wood composites are susceptible to destruction by rot fungi. Herein, the role of process parameters such as density and resin content on OWMEC resistance to fungal decay was investigated. The poplar OWMEC samples were exposed to white-rot fungus Trametes versicolor and brown-rot fungus Gloeophyllum trabeum for a period of 12 weeks. The chemical composition, crystallinity, and morphology were evaluated to investigate the effect of process parameters on the chemical composition and microstructure of the decayed OWMEC. With an increase in the density and resin content, the mass loss of the decayed OWMEC decreased. The highest antifungal effect against T. versicolor (12.34% mass loss) and G. trabeum (19.43% mass loss) were observed at a density of 1.15 g/m3 and resin content of 13%. As results of the chemical composition and microstructure measurements, the resistance of OWMEC against T. versicolor and G. trabeum fungi was improved remarkably by increasing the density and resin content. The results of this study will provide a technical basis to improve the decay resistance of OWMEC in outdoor environments.

[1]  Min-ji Kim,et al.  Experimental investigation of the humidity effect on wood discoloration by selected mold and stain fungi for a proper conservation of wooden cultural heritages , 2020, Journal of Wood Science.

[2]  Anuj Kumar,et al.  Resistance of bamboo scrimber against white-rot and brown-rot fungi , 2020 .

[3]  Zaixing Wu,et al.  A Note on the Surface Deterioration of Scrimber Composites Exposed to Artificial Ageing , 2019, Coatings.

[4]  Yuhe Chen,et al.  Fabrication, physical–mechanical properties and morphological characterizations of novel scrimber composite , 2019, European Journal of Wood and Wood Products.

[5]  Yahui Zhang,et al.  Improvement of the water repellency, dimensional stability, and biological resistance of bamboo‐based fiber reinforced composites , 2019 .

[6]  Yue Qi,et al.  Novel engineered scrimber with outstanding dimensional stability from finely fluffed poplar veneers , 2018, Measurement.

[7]  Yahui Zhang,et al.  Influence of veneer thickness, mat formation and resin content on some properties of novel poplar scrimbers , 2018, Holzforschung.

[8]  Yahui Zhang,et al.  Scrimber board (SB) manufacturing by a new method and characterization of SB’s mechanical properties and dimensional stability , 2017 .

[9]  O. Schmidt,et al.  Assessing the destructive behaviors of two white-rot fungi on beech wood , 2016 .

[10]  Minjuan He,et al.  Production and mechanical performance of scrimber composite manufactured from poplar wood for structural applications , 2016, Journal of Wood Science.

[11]  Yahui Zhang,et al.  Effect of density on the hygroscopicity and surface characteristics of hybrid poplar compreg , 2016, Journal of Wood Science.

[12]  R. Oladi,et al.  In vivo investigation of chemical alteration in oak wood decayed by Pleurotus ostreatus , 2016 .

[13]  P. Tahir,et al.  Impregnation of sesenduk (Endospermum diadenum) wood with phenol formaldehyde and nanoclay admixture: effect on fungal decay and termites attack , 2016 .

[14]  P. Witomski,et al.  Changes in strength of Scots pine wood (Pinus silvestris L.) decayed by brown rot (Coniophora puteana) and white rot (Trametes versicolor) , 2016 .

[15]  R. Oladi,et al.  A histological investigation of Oriental beech wood decayed by Pleurotus ostreatus and Trametes versicolor , 2015 .

[16]  O. Schmidt,et al.  Comparison between degradation capabilities of the white rot fungi Pleurotus ostreatus and Trametes versicolor in beech wood , 2015 .

[17]  F. Kamke,et al.  Resistance of resin-impregnated VTC processed hybrid-poplar to fungal attack , 2015 .

[18]  Z. Ashaari,et al.  Durability of phenolic-resin-treated oil palm wood against subterranean termites a white-rot fungus , 2013 .

[19]  I. Cullis,et al.  Photostabilization of wood using low molecular weight phenol formaldehyde resin and hindered amine light stabilizer , 2013 .

[20]  Karin Fackler,et al.  Polysaccharide Degradation and Lignin Modification during Brown Rot of Spruce Wood: A Polarised Fourier Transform near Infrared Study , 2010 .

[21]  Francis W. M. R. Schwarze,et al.  WOOD DECAY UNDER THE MICROSCOPE , 2007 .

[22]  U. Kallavus,et al.  On the changes of pinewood (Pinus sylvestris L.) Chemical composition and ultrastructure during the attack by brown-rot fungi Postia placenta and Coniophora puteana , 2006 .

[23]  T. Fujiwara,et al.  The effects of within-species and between-species variation in wood density on the photodegradation depth profiles of sugi (Cryptomeria japonica) and hinoki (Chamaecyparis obtusa) , 2005, Journal of Wood Science.

[24]  A. Pitman,et al.  FTIR studies of the changes in wood chemistry following decay by brown-rot and white-rot fungi , 2003 .

[25]  K. Pandey.  A study of chemical structure of soft and hardwood and wood polymers by FTIR spectroscopy , 1999 .

[26]  T. K. Kirk,et al.  Quantitative Changes in Structural Components of Conifer Woods During Decay by White- and Brown-Rot Fungi , 1973 .