Conformal coating of parylene for surface anti-adhesion in polydimethylsiloxane (PDMS) double casting technique

Abstract As a simple method to fabricate a high quality copy of master, PDMS double casting technique has been more and more popular in microfluidics chips and bioMEMS application. In this work, the method in which conformal coating of parylene C serves as a demolding anti-adhesion layer in PDMS double casting technique was proposed. First casting was carried out onto master mold to generate negative PDMS mold and second casting was done onto negative PDMS mold likewise to generate positive PDMS replica with the same structure as master mold. Microstructures with aspect ratio from 4:1 to 20:1 and sharp angle from 5° to 40° were successfully obtained by using this new method. Experiments show replicas remain high fidelity to their masters. This new method of surface anti-adhesive treatment is environment friendly. Moreover, a single coating of parylene C can make the treated mold keep its anti-adhesive property for long lifecycle regardless of the number of replica molding cycles.

[1]  P. Cheng,et al.  Heat transfer and pressure drop in fractal tree-like microchannel nets , 2002 .

[2]  Rajeeb Kumar Jena,et al.  Comparison of different molds (epoxy, polymer and silicon) for microfabrication by hot embossing technique , 2012 .

[3]  Dong-Chul Han,et al.  PDMS-based micro PCR chip with Parylene coating , 2003 .

[4]  Lingbo Zhu,et al.  Biomimetic creation of hierarchical surface structures by combining colloidal self-assembly and Au sputter deposition. , 2006, Langmuir : the ACS journal of surfaces and colloids.

[5]  M. Farzaneh,et al.  Effect of contact angle hysteresis on water droplet evaporation from super-hydrophobic surfaces , 2009 .

[6]  Guocheng Shao,et al.  Fabrication of elastomeric high-aspect-ratio microstructures using polydimethylsiloxane (PDMS) double casting technique , 2012 .

[7]  Elena Martínez,et al.  Stability of microfabricated high aspect ratio structures in poly(dimethylsiloxane). , 2005, Langmuir : the ACS journal of surfaces and colloids.

[8]  G. Whitesides,et al.  Soft lithography for micro- and nanoscale patterning , 2010, Nature Protocols.

[9]  C. Liu,et al.  Recent Developments in Polymer MEMS , 2007 .

[10]  Ut-Binh T. Giang,et al.  Microfabrication of Bubbular Cavities in PDMS for Cell Sorting and Microcell Culture Applications , 2008 .

[11]  G. Whitesides,et al.  Direct measurement of interfacial interactions between semispherical lenses and flat sheets of poly(dimethylsiloxane) and their chemical derivatives , 1991 .

[12]  P. Cheng,et al.  An experimental investigation on the thermal efficiency of fractal tree-like microchannel nets , 2005 .

[13]  Feng Zhang,et al.  Effect of surface free energy on PDMS transfer in microcontact printing and its application to ToF-SIMS to probe surface energies. , 2009, Langmuir : the ACS journal of surfaces and colloids.

[14]  G. Whitesides,et al.  Fabrication of microfluidic systems in poly(dimethylsiloxane) , 2000, Electrophoresis.

[15]  D. Beebe,et al.  PDMS absorption of small molecules and consequences in microfluidic applications. , 2006, Lab on a chip.

[16]  G. Whitesides,et al.  Rapid Prototyping of Microfluidic Systems in Poly(dimethylsiloxane). , 1998, Analytical chemistry.

[17]  Jay J. Senkevich,et al.  Molecular Layer Chemistry via Parylenes , 2009 .

[18]  Vikramaditya G. Yadav,et al.  Cell and protein compatibility of parylene-C surfaces. , 2007, Langmuir : the ACS journal of surfaces and colloids.

[19]  Detlev Belder,et al.  Rapid replication of master structures by double casting with PDMS. , 2009, Lab on a chip.

[20]  Fabrication and characterization of Parylene C-caulked PDMS for low-permeable microfluidics , 2011, 2011 IEEE 24th International Conference on Micro Electro Mechanical Systems.

[21]  Ching-ping Wong,et al.  Relationship between Work of Adhesion and Contact Angle Hysteresis on Superhydrophobic Surfaces , 2008 .