Thermal stress analysis of sulfur deactivated solid oxide fuel cells

[1]  Min Xu,et al.  Thermal stress analysis of a planar anode-supported solid oxide fuel cell: Effects of anode porosity , 2017 .

[2]  Lei Bi,et al.  Proton-conducting solid oxide fuel cell (SOFC) with Y-doped BaZrO3 electrolyte , 2017 .

[3]  Min Xu,et al.  Modeling of an anode supported Solid Oxide Fuel Cell focusing on Thermal Stresses , 2016 .

[4]  Mohd Ali Hashim,et al.  Thermal stress management of a solid oxide fuel cell using neural network predictive control , 2013 .

[5]  B. Sundén,et al.  SOFC modeling considering hydrogen and carbon monoxide as electrochemical reactants , 2013 .

[6]  Jeong-Ho Kim,et al.  Finite element thermal stress analysis of solid oxide fuel cell cathode microstructures , 2013 .

[7]  Xin Sun,et al.  A damage model for degradation in the electrodes of solid oxide fuel cells: Modeling the effects of sulfur and antimony in the anode , 2012 .

[8]  Nigel P. Brandon,et al.  Finite element and analytical stress analysis of a solid oxide fuel cell , 2012 .

[9]  Bengt Sundén,et al.  SOFC modeling considering electrochemical reactions at the active three phase boundaries , 2012 .

[10]  N. Shikazono,et al.  Evaluation of SOFC anode polarization simulation using three-dimensional microstructures reconstructed by FIB tomography , 2011 .

[11]  Tingshuai Li,et al.  Hydrogen sulfide poisoning in solid oxide fuel cells under accelerated testing conditions , 2010 .

[12]  Jeong-Ho Kim,et al.  Thermal stress and probability of failure analyses of functionally graded solid oxide fuel cells , 2010 .

[13]  Mustafa Fazil Serincan,et al.  Thermal stresses in an operating micro-tubular solid oxide fuel cell , 2010 .

[14]  Abhijit Chandra,et al.  Modeling of thermal stresses and lifetime prediction of planar solid oxide fuel cell under thermal cycling conditions , 2010 .

[15]  Tsung Leo Jiang,et al.  Thermal-stress analyses of an operating planar solid oxide fuel cell with the bonded compliant seal design , 2009 .

[16]  Toshio Suzuki,et al.  Impact of Anode Microstructure on Solid Oxide Fuel Cells , 2009, Science.

[17]  Daniel Favrat,et al.  Simulation of thermal stresses in anode-supported solid oxide fuel cell stacks. Part I: Probability of failure of the cells , 2009 .

[18]  Lieh-Kwang Chiang,et al.  Thermal stress analysis of planar solid oxide fuel cell stacks: Effects of sealing design , 2009 .

[19]  D. Cui,et al.  Thermal stress modeling of anode supported micro-tubular solid oxide fuel cell , 2009 .

[20]  A. Hagen,et al.  The effect of H2S on the performance of Ni-YSZ anodes in solid oxide fuel cells , 2009 .

[21]  Tao Zhang,et al.  Modeling of cracking of the glass-based seals for solid oxide fuel cell , 2009 .

[22]  Lieh-Kwang Chiang,et al.  Thermo-electrochemical and thermal stress analysis for an anode-supported SOFC cell , 2008 .

[23]  I. Celik,et al.  Effects of coal syngas impurities on anodes of solid oxide fuel cells , 2008 .

[24]  Kazunari Sasaki,et al.  Poisoning of SOFC anodes by various fuel impurities , 2008 .

[25]  Brian J. Koeppel,et al.  Comparative finite element analysis of the stress-strain states in three different bonded solid oxide fuel cell seal designs , 2008 .

[26]  Amornchai Arpornwichanop,et al.  Electrochemical study of a planar solid oxide fuel cell: Role of support structures , 2008 .

[27]  Nigel P. Brandon,et al.  Thermodynamic predictions of the impact of fuel composition on the propensity of sulphur to interact with Ni and ceria-based anodes for solid oxide fuel cells , 2008 .

[28]  Meilin Liu,et al.  Influence of cell voltage and current on sulfur poisoning behavior of solid oxide fuel cells , 2007 .

[29]  Meilin Liu,et al.  Characterization of sulfur poisoning of Ni–YSZ anodes for solid oxide fuel cells using in situ Raman microspectroscopy , 2007 .

[30]  W. Bessler,et al.  The influence of equilibrium potential on the hydrogen oxidation kinetics of SOFC anodes , 2007 .

[31]  Lieh-Kwang Chiang,et al.  Thermal stress analysis of a planar SOFC stack , 2007 .

[32]  M. Fowler,et al.  Experimental and modeling study of solid oxide fuel cell operating with syngas fuel , 2006 .

[33]  A. Fedorov,et al.  Reduced-order transient thermal modeling for SOFC heating and cooling , 2006 .

[34]  Miriam Kemm,et al.  Steady state and transient thermal stress analysis in planar solid oxide fuel cells , 2005 .

[35]  J. Young,et al.  Thermodynamic and transport properties of gases for use in solid oxide fuel cell modelling , 2002 .

[36]  S. Chan,et al.  Polarization effects in electrolyte/electrode-supported solid oxide fuel cells , 2002 .

[37]  R. Herbin,et al.  Three-dimensional numerical simulation for various geometries of solid oxide fuel cells , 1996 .

[38]  K. Nakanishi,et al.  PROPERTIES OF NI3S2 AT HIGH TEMPERATURES , 1994 .

[39]  Michael V. Swain,et al.  Nickel sulphide inclusions in glass: an example of microcracking induced by a volumetric expanding phase change , 1981 .