Intrinsic polymer optical fiber sensors for high-strain applications

This paper presents intrinsic polymer fiber (POF) sensors for high-strain applications such as health monitoring of civil infrastructure systems subjected to earthquake loading or structures with large shape changes such as morphing aircraft. POFs provide a potential maximum strain range of 6-12%, are more flexible that silica optical fibers, and are more durable in harsh chemical or environmental conditions. Recent advances in the fabrication of singlemode POFs have made it possible to extend POFs to interferometric sensor capabilities. Furthermore, the interferometric nature of intrinsic sensors permits high accuracy for such measurements. However, several challenges, addressed in this paper, make the application of the POF interferometer more difficult than its silica counterpart. These include the finite deformation of the POF cross-section at high strain values, nonlinear strain optic effects in the polymer, and the attenuation with strain of the POF. In order to predict the response of the sensor a second-order (in strain) photoelastic effect is derived and combined with the second-order solution of the deformation of the optical fiber when loaded. It is determined that for the small deformation region four constants are required (two mechanical and two photoelastic properties) and for the large deformation region six additional constants are required (two mechanical and four photoelastic properties). This paper also presents initial measurements of the mechanical response of the sensor and comparison to previously reported POFs.

[1]  J. A. Buck,et al.  Fundamentals of optical fibers , 1995 .

[2]  I. N. Sneddon,et al.  Finite Deformation of an Elastic Solid , 1954 .

[3]  J. Nye.  Physical Properties of Crystals: Their Representation by Tensors and Matrices , 1957 .

[4]  Wesley J. Cantwell,et al.  Crack detection and vertical deflection monitoring in concrete beams using plastic optical fibre sensors , 2003 .

[5]  Mervyn Kowalsky,et al.  Polymer optical fiber sensors for the civil infrastructure , 2006, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[6]  Hwa-Yaw Tam,et al.  Structural and mechanical properties of polymeric optical fiber , 2004 .

[7]  Pascal Mauron,et al.  Reliability of fiber Bragg grating based sensors for downhole applications , 2003 .

[8]  G. Hocker,et al.  Fiber optics strain gauge. , 1978, Applied optics.

[9]  Nobuo Takeda,et al.  Characterization of microscopic damage in composite laminates and real-time monitoring by embedded optical fiber sensors , 2002 .

[10]  F. Reynaud,et al.  Analysis of Chromatic Dispersion Variation in Optical Fiber under Large Stretching , 1999 .

[11]  K.S.C. Kuang,et al.  An evaluation of a novel plastic optical fibre sensor for axial strain and bend measurements , 2002 .

[12]  Lon A. Wang,et al.  Wavelength shifts of cladding-mode resonance in corrugated long-period fiber gratings under torsion. , 2003, Applied optics.

[13]  R. Dändliker,et al.  Determination of the individual strain-optic coefficients in single-mode optical fibres , 1988 .

[14]  Silvano Donati,et al.  Electro-Optical Instrumentation: Sensing and Measuring with Lasers , 2004 .

[15]  J S Sirkis,et al.  Surface-mounted optical fiber strain sensor design. , 1991, Applied optics.

[16]  G. Peng,et al.  Highly tunable Bragg gratings in single-mode polymer optical fibers , 1999, IEEE Photonics Technology Letters.

[17]  K.S.C. Kuang,et al.  Assessment of an extrinsic polymer-based optical fibre sensor for structural health monitoring , 2004 .

[18]  R. Dändliker,et al.  Deformation of single-mode optical fibers under static longitudinal stress , 1987 .

[19]  M. S. Demokan,et al.  Improved demodulation scheme for fiber optic interferometers using an asymmetric 3/spl times/3 coupler , 1997 .

[20]  K.S.C. Kuang,et al.  The use of plastic optical fibres and shape memory alloys for damage assessment and damping control in composite materials , 2003 .