Novel Multicarrier PWM Scheme for a Reconfigurable Single-Phase Inverter to Achieve Manifold Higher Effective Switching Frequency

Inverter operation at higher switching frequency brings several advantages. The article presents a novel multicarrier pulsewidth modulation (PWM) scheme along with a reconfigurable single-phase inverter topology. The combination facilitates multiple times higher effective switching frequency (ESF) at the inverter output. The novel reconfigurable topology incorporates additional pairs of series-connected switches in the conventional full-bridge inverter. The proposed PWM scheme uses multiple modified carrier waves to generate gate pulses for the various switches. Consequently, the switches operate in such a coordinated manner that ESF increases multiple times compared to the actual switching frequency of its switches. Thus, the scheme offers several advantages like reduced filter requirements, reduced overall size, weight, and cost. Moreover, the distortion in the output waveforms caused by the dead time is eliminated by a modified dead-time compensation technique, incorporated with the proposed PWM scheme. The proposed scheme is demonstrated here by configuring the proposed inverter topology as an eight-switch topology to achieve four times higher ESF. It is shown through analysis, simulations, and experimental results that in spite of including additional switches, a high-frequency operation can be achieved with a low cost. The proposed scheme may serve as an alternative to using wide bandgap devices, thereby saving cost and efforts.

[1]  Khai D. T. Ngo,et al.  A PWM method for reduction of switching loss in a full-bridge inverter , 1995 .

[2]  Z. Zhou,et al.  Compact thermal model of a three-phase IGBT inverter power module , 2008, 2008 26th International Conference on Microelectronics.

[3]  Frede Blaabjerg,et al.  Thermal Performance and Reliability Analysis of Single-Phase PV Inverters With Reactive Power Injection Outside Feed-In Operating Hours , 2015, IEEE Journal of Emerging and Selected Topics in Power Electronics.

[4]  J. Marvin,et al.  Semiconductor power losses in AC inverters , 1995, IAS '95. Conference Record of the 1995 IEEE Industry Applications Conference Thirtieth IAS Annual Meeting.

[5]  P.T. Krein,et al.  High-frequency link inverter for fuel cells based on multiple-carrier PWM , 2004, IEEE Transactions on Power Electronics.

[6]  Brendan Peter McGrath,et al.  Multicarrier PWM strategies for multilevel inverters , 2002, IEEE Trans. Ind. Electron..

[7]  Seung-Ki Sul,et al.  Inverter output voltage synthesis using novel dead time compensation , 1996 .

[8]  M. Glover,et al.  Wide Bandgap Technologies and Their Implications on Miniaturizing Power Electronic Systems , 2014, IEEE Journal of Emerging and Selected Topics in Power Electronics.

[9]  Zhangyong Chen,et al.  Isolated Series-Capacitor-Based Full-Bridge Converter With Reduced Circulating Losses and Wide Soft Switching Range , 2019, IEEE Journal of Emerging and Selected Topics in Power Electronics.

[10]  Yoshihiro Murai,et al.  Waveform Distortion and Correction Circuit for PWM Inverters with Switching Lag-Times , 1987, IEEE Transactions on Industry Applications.

[11]  Seung-Gi Jeong,et al.  The analysis and compensation of dead-time effects in PWM inverters , 1991 .

[12]  Yintang Yang,et al.  Novel SiC/Si Heterojunction Power MOSFET With Breakdown Point Transfer Terminal Technology by TCAD Simulation Study , 2018, IEEE Transactions on Electron Devices.

[13]  Fred C. Lee,et al.  Soft-switching techniques in PWM converters , 1995, IEEE Trans. Ind. Electron..

[14]  Mehrdad Ehsani,et al.  A review of soft-switched DC-AC converters , 1996, IAS '96. Conference Record of the 1996 IEEE Industry Applications Conference Thirty-First IAS Annual Meeting.

[15]  Gerald Deboy,et al.  Superjunction Power Devices, History, Development, and Future Prospects , 2017, IEEE Transactions on Electron Devices.

[16]  K. Kamiyama,et al.  Fully digital, vector-controlled PWM VSI-fed AC drives with an inverter dead-time compensation strategy , 1988, Conference Record of the 1988 IEEE Industry Applications Society Annual Meeting.

[17]  F. Peng,et al.  An H-Bridge-Based Single-Phase VAr Generator With Minimum DC Capacitance , 2018, IEEE Journal of Emerging and Selected Topics in Power Electronics.

[18]  Wolfgang R. Fahrner,et al.  Review on materials, microsensors, systems and devices for high-temperature and harsh-environment applications , 2001, IEEE Trans. Ind. Electron..

[19]  Dong Cao,et al.  A SiC-Based High Power Density Single-Phase Inverter With In-Series and In-Parallel Power Decoupling Method , 2016, IEEE Journal of Emerging and Selected Topics in Power Electronics.

[20]  Frede Blaabjerg,et al.  A New Design Method for the Passive Damped LCL and LLCL Filter-Based Single-Phase Grid-Tied Inverter , 2013, IEEE Transactions on Industrial Electronics.

[21]  Johann W. Kolar,et al.  SiC versus Si—Evaluation of Potentials for Performance Improvement of Inverter and DC–DC Converter Systems by SiC Power Semiconductors , 2011, IEEE Transactions on Industrial Electronics.

[22]  Jie Shen,et al.  A Novel Phase-Interleaving Algorithm for Multiterminal Systems , 2010, IEEE Transactions on Power Electronics.

[23]  Q.M.J. Wu,et al.  An accurate approach of nonlinearity compensation for VSI inverter output voltage , 2004, IEEE Transactions on Power Electronics.

[24]  Raja Ayyanar,et al.  Comprehensive comparison of THD and common mode leakage current of bipolar, unipolar and hybrid modulation schemes for single phase grid connected full bridge inverters , 2017, 2017 IEEE Applied Power Electronics Conference and Exposition (APEC).

[25]  Bo Liu,et al.  Design and Implementation of a GaN-Based, 100-kHz, 102-W/in3 Single-Phase Inverter , 2016, IEEE Journal of Emerging and Selected Topics in Power Electronics.

[26]  Russel J. Kerkman,et al.  Pulse-based dead-time compensator for PWM voltage inverters , 1997, IEEE Trans. Ind. Electron..