Interaction of liquid and solid gallium with thin silver films: Synchronized spreading and penetration

Abstract The synchronized lateral spreading and through-penetration of liquid and solid gallium (Ga) in supported thin polycrystalline films of silver (Ag) were studied. The spreading and penetration kinetics were presumably controlled by a common mechanism. The spreading rate in the 0.5 μm thick film was found to be constant with time. The activation energies of the process responsible for spreading/penetration of liquid and solid Ga were E L  ≈ 28.9 ± 4.8 kJ mol −1 and E S  ≈ 48.2 ± 9.6 kJ mol −1 , respectively. Grain boundary grooving, with Ag diffusion out of the groove either through liquid Ga or through solid Ga, was suggested as a possible mechanism of the spreading and penetration. The model proposed reproduced the observed spreading/penetration rates and gave reasonable estimates of the energies E S and E L .

[1]  A. Cicco Phase Transitions in Confined Gallium Droplets , 1998 .

[2]  N. V. Sibirev,et al.  Theoretical analysis of the vapor-liquid-solid mechanism of nanowire growth during molecular beam epitaxy. , 2006, Physical review. E, Statistical, nonlinear, and soft matter physics.

[3]  K. Wolski,et al.  Grain boundary penetration of nickel by liquid bismuth as a film of nanometric thickness , 2000 .

[4]  E. Rabkin,et al.  Role of the solid/liquid interface faceting in rapid penetration of a liquid phase along grain boundaries , 2001 .

[5]  S. Kang Liquid phase sintering , 2010 .

[6]  N. Eustathopoulos Dynamics of wetting in reactive metal/ ceramic systems , 1998 .

[7]  R. Swalin,et al.  Thermodynamics of Solids , 1963 .

[8]  M. Nathan,et al.  ON THE KINETIC MECHANISM OF GRAIN BOUNDARY WETTING IN METALS , 1999 .

[9]  E. S. Machlin,et al.  An Introduction to Aspects of Thermodynamics and Kinetics: Relevant to Materials Science , 1991 .

[10]  King-Ning Tu,et al.  Physics and materials challenges for lead-free solders , 2003 .

[11]  E. Glickman Fast penetration of Ga in Al : liquid metal embrittlement near the threshold of grain boundary wetting , 2005 .

[12]  R. M. Cannon,et al.  Ridging effects on wetting and spreading of liquids on solids , 1998 .

[13]  P. Choi,et al.  Acoustic emission associated with the fracture of Al and Al alloy embrittled by liquid gallium , 1994 .

[14]  Y. Mishin,et al.  Fundamentals of grain and interphase boundary diffusion , 1995 .

[15]  W. Ludwig,et al.  Discontinuous penetration of liquid Ga into grain boundaries of Al polycrystals , 2004 .

[16]  J. Čermák,et al.  Ni and Ga diffusion in polycrystalline Ni3Ga , 2002 .

[17]  J. A. Pask,et al.  Wetting and spreading in the CuAg system , 1981 .

[18]  W. Gust,et al.  Handbook of grain and interphase boundary diffusion data , 1989 .

[19]  B. Drevet,et al.  Wettability at high temperatures , 1999 .

[20]  W. Mullins Theory of Thermal Grooving , 1957 .

[21]  E. Rabkin Coherency strain energy as a driving force for liquid grooving at grain boundaries , 1998 .

[22]  Milton Ohring,et al.  Reliability and Failure of Electronic Materials and Devices, Second Edition , 1998 .

[23]  A. Paskin Structure of liquid metals , 1967 .

[24]  King-Ning Tu,et al.  Solder Joint Technology: Materials, Properties, and Reliability , 2007 .

[25]  S. Lynch Metal-induced embrittlement of materials , 1992 .