Evaluation of a pyroelectric detector with a carbon multiwalled nanotube black coating in the infrared.

The performance of a pyroelectric detector with a carbon multiwalled nanotube coating was evaluated in the 0.9-14 microm wavelength range. The relative spectral responsivity of this detector was shown to be flat over most of the wavelength range examined, and the spectral flatness was shown to be comparable to the best infrared black coatings currently available. This finding is promising because black coatings with spectrally flat absorbance profiles are usually associated with the highest absorbance values. The performance of the detector (in terms of noise equivalent power and specific detectivity) was limited by the very thick (250 microm thick) LiNbO3 pyroelectric crystal onto which the coating was deposited. The responsivity of this detector was shown to be linear in the 0.06-2.8 mW radiant power range, and its spatial uniformity was comparable to that of other pyroelectric detectors that use different types of black coating. The carbon nanotube coatings were reported to be much more durable than other infrared black coatings, such as metal blacks, that are commonly used to coat thermal detectors in the infrared. This, in combination with their excellent spectral flatness, suggests that carbon nanotube coatings appear extremely promising for thermal detection applications in the infrared.

[1]  George P. Eppeldauer,et al.  Gold-black coatings for freestanding pyroelectric detectors , 2003 .

[2]  N. Fox,et al.  Absolute linearity measurements on HgCdTe detectors in the infrared region. , 2004, Applied optics.

[3]  W. Budde Physical detectors of optical radiation , 1983 .

[4]  D. Xu,et al.  A semi-analytic method for studying optical properties of aligned carbon nanotubes , 2003 .

[5]  K. Nassau,et al.  Ferroelectric lithium niobate. 2. Preparation of single domain crystals , 1966 .

[6]  J. Cox,et al.  Deposition and characterization of far-infrared absorbing gold black films. , 1993, Applied optics.

[7]  J. Pendry,et al.  EFFECTIVE MEDIUM THEORY OF THE OPTICAL PROPERTIES OF ALIGNED CARBON NANOTUBES , 1997, cond-mat/9705110.

[8]  J. Geist,et al.  Influence of black coatings on pyroelectric detectors. , 1974, Applied optics.

[9]  K. Nassau,et al.  Ferroelectric lithium niobate. 1. Growth, domain structure, dislocations and etching , 1966 .

[10]  A. Glass FERROELECTRIC Sr1−xBaxNb2O6 AS A FAST AND SENSITIVE DETECTOR OF INFRARED RADIATION , 1968 .

[11]  R M Osgood,et al.  Fabrication and evaluation of a freestanding pyroelectric detector made from single-crystal LiNbO(3) film. , 2000, Optics letters.

[12]  A. Dillon,et al.  Single-wall carbon nanotube coating on a pyroelectric detector. , 2005, Applied optics.

[13]  Nigel P. Fox,et al.  Comparison of the performance of infrared detectors for radiometric applications , 1996, Optics & Photonics.

[14]  John H. Lehman,et al.  Carbon multi-walled nanotubes grown by HWCVD on a pyroelectric detector , 2005 .

[15]  N. Nelms,et al.  Goldblack coating for thermal infrared detectors , 2005 .

[16]  Nigel P. Fox,et al.  Latest measurement techniques at NPL for the characterization of infrared detectors and materials , 2003, SPIE Optics + Photonics.

[17]  N. Fox,et al.  A comparison of the performance of a photovoltaic HgCdTe detector with that of large area single pixel QWIPs for infrared radiometric applications , 2005 .