Laser patterning of SiOx-layers for the fabrication of UV diffractive phase elements

Diffractive phase elements (DPE), consisting of a patterned UV-transparent layer on a UV-transparent substrate, were fabricated by three steps. A UV-absorbing SiO x -coating (x < 2) with a thickness matching to the required phase delay was deposited on a fused silica substrate. The coating was removed on a pixel array corresponding to a calculated two-dimensional quantized phase function (DPE-design). By a thermal annealing process the SiO x -coating was oxidised to UV-transparent SiO 2 , resulting in a UV-grade surface relief element.

[1]  J Ihlemann,et al.  Excimer laser micro machining: fabrication and applications of dielectric masks , 2000 .

[2]  Peter R. Herman,et al.  Fabrication of diffractive phase elements by F2-laser ablation of fused silica , 2003, International Symposium on Laser Precision Microfabrication.

[3]  Manuel Flury,et al.  Rapid prototyping of diffractive optical elements for high-power lasers using laser ablation lithography fabrication and coherence probe microscopy analysis , 2002 .

[4]  Frank Wyrowski,et al.  Diffractive Optics for Industrial and Commercial Applications , 1997 .

[5]  J R Leger,et al.  Rapid fabrication of diffractive optical elements by use of image-based excimer laser ablation. , 1997, Applied optics.

[6]  Roland Thielsch,et al.  Laser ablation patterning of dielectric layer stacks for 193-nm mask fabricaton , 2002, International Symposium on Laser Precision Microfabrication.

[7]  G P Behrmann,et al.  Excimer laser micromachining for rapid fabrication of diffractive optical elements. , 1997, Applied optics.

[8]  J Ihlemann,et al.  Fabrication of diffractive phase elements for the UV-range by laser ablation patterning of dielectric layers , 2002 .

[9]  J. Ihlemann,et al.  Patterning of optical coatings by laser ablation for the fabrication of dielectric masks and diffractive phase elements , 2004 .

[10]  R. Srinivasan,et al.  Photo‐oxidation of silicon monoxide to silicon dioxide with pulsed far‐ultraviolet (193 nm) laser radiation , 1983 .

[11]  Juergen Ihlemann,et al.  Fabrication of diffractive optical elements by ArF-laser ablation of fused silica , 2003, SPIE LASE.

[12]  Reinhold Ebner,et al.  Pulsed laser deposition: a new technique for deposition of amorphous SiOx thin films , 2003 .

[13]  Frank Wyrowski,et al.  Diffractive optical elements: iterative calculation of quantized, blazed phase structures , 1990 .