IGBT Fault Protection Based on di/dt Feedback Control

Customer power modules built with the latest IGBT chips may be operated to their extreme conditions in terms of junction temperature, switching speed and voltage and current ratings. This is of particular advantageous in electric/hybrid vehicle applications where power density is a critical design factor. With IGBTs operated at extreme conditions the fault response time with a traditional IGBT fault protection approach, such as Vce sensing approach, may not be fast enough. This paper presents a circuit configuration to identify an IGBT fault current by means of measuring the induced voltage across the stray inductance between the IGBT Kelvin emitter and power emitter. Upon fault current detection a feedback control is introduced to dynamically control the di/dt of the fault current. Once the fault current is contained at a predetermined level, a slow turn off mechanism is deployed. The effectiveness of the proposed IGBT protection scheme was validated with customer power modules using Infineon 3rd generation IGBT chips rated at 600 V 1000 A for 100 kW electric drive systems used in fuel cell powered electric vehicles.

[1]  Thomas A. Lipo,et al.  Fast-clamped short-circuit protection of IGBT's , 1999 .

[2]  M. Melito,et al.  A novel protection technique devoted to the improvement of the short circuit ruggedness of IGBTs , 2003, IECON'03. 29th Annual Conference of the IEEE Industrial Electronics Society (IEEE Cat. No.03CH37468).

[3]  Min-Koo Han,et al.  The Optimized Monolithic Fault Protection Circuit for the Soft-shutdown behavior of 600V PT-IGBT by employing a New Blanking Filter , 2006, 2006 IEEE International Symposium on Power Semiconductor Devices and IC's.

[4]  Thomas A. Lipo,et al.  Fast clamped short circuit protection of IGBTs , 1998, APEC '98 Thirteenth Annual Applied Power Electronics Conference and Exposition.

[5]  S. Musumeci,et al.  Short circuit analysis and protection of power module IGBTs , 2005, Twentieth Annual IEEE Applied Power Electronics Conference and Exposition, 2005. APEC 2005..

[6]  G. Belverde,et al.  A new gate circuit performing fault protections of IGBTs during short circuit transients , 2002, Conference Record of the 2002 IEEE Industry Applications Conference. 37th IAS Annual Meeting (Cat. No.02CH37344).

[7]  R. Chokhawala,et al.  IGBT fault current limiting circuit , 1995 .