Surface Modification of Non-woven Textiles using a Dielectric Barrier Discharge Operating in Air, Helium and Argon at Medium Pressure

In this paper, polyethylene terephthalate (PET) and polypropylene (PP) non-wovens were modified by a dielectric barrier discharge in air, helium and argon at medium pressure (5.0 kPa). The helium and argon discharges contained a fraction of air smaller than 0.1 %. Surface analysis and characterization were performed using X-ray photoelectron spectroscopy, liquid absorptive capacity measurements and scanning electron microscopy (SEM). The non-wovens, modified in air, helium and argon, showed a significant increase in liquid absorptive capacity due to the incorporation of oxygen-containing groups, such as C—O, O—C=O and C=O. It was shown that an air plasma was more efficient in incorporating oxygen functionalities than an argon plasma, which was more efficient than a helium plasma. SEM pictures of the plasma-treated nonwovens showed that the hydrophilicity of the nonwovens could be increased to a saturation value without causing physical degradation of the surface. The ageing behavior of the plasma-treated textiles after storage in air was also studied. It was shown that during the ageing process, the induced oxygen-containing groups re-orientated into the bulk of the material. This ageing effect was the smallest for the argon-plasma treated non-wovens, followed by the helium-plasma treated non-wovens, while the air-plasma treated non-wovens showed the largest ageing effect.

[1]  H. Martínez,et al.  Ageing of atactic and isotactic polystyrene thin films treated by oxygen DC pulsed plasma , 2005 .

[2]  G. Borcia,et al.  Dielectric barrier discharge for surface treatment: application to selected polymers in film and fibre form , 2003 .

[3]  N. Brown,et al.  Modification of the surface properties of a polypropylene (PP) film using an air dielectric barrier discharge plasma , 2002 .

[4]  K. V. Kozlov,et al.  The barrier discharge: basic properties and applications to surface treatment , 2003 .

[5]  Yiping Qiu,et al.  Modifying Nylon and Polypropylene Fabrics with Atmospheric Pressure Plasmas , 2002 .

[6]  G. Popa,et al.  Surface cross linking and functionalization of poly(ethylene terephthalate) in a helium discharge , 1997 .

[7]  M. Kushner,et al.  A model for plasma modification of polypropylene using atmospheric pressure discharges , 2003 .

[8]  N. Gherardi,et al.  The Role of Dielectric Barrier Discharge Atmosphere and Physics on Polypropylene Surface Treatment , 2001 .

[9]  J. Roth,et al.  Surface Modification of Fabrics Using a One-Atmosphere Glow Discharge Plasma to Improve Fabric Wettability , 1997 .

[10]  G. Pietsch.  Peculiarities of dielectric barrier discharges , 2001 .

[11]  U. Vohrer,et al.  Glow-discharge treatment for the modification of textiles , 1998 .

[12]  M. Sira,et al.  Surface modification of polyethylene and polypropylene in atmospheric pressure glow discharge , 2005 .

[13]  J. Nakamatsu,et al.  Ageing of plasma-treated poly(tetrafluoroethylene) surfaces , 1999 .

[14]  Rachel L. Williams,et al.  Plasma modification of PTFE surfaces. Part II: Plasma‐treated surfaces following storage in air or PBS , 2001 .

[15]  P. Murányi,et al.  Sterilization of Polymer Foils with Dielectric Barrier Discharges at Atmospheric Pressure , 2004 .

[16]  Iu. P. Raizer.  Gas Discharge Physics , 1991 .

[17]  M. Simor,et al.  Hydrophilization of polypropylene nonwoven fabric using surface barrier discharge , 2003 .

[18]  Marian McCord,et al.  Effects of Helium Atmospheric Pressure Plasma Treatment on Low-Stress Mechanical Properties of Polypropylene Nonwoven Fabrics , 2005 .

[19]  G. Borcia,et al.  Using a nitrogen dielectric barrier discharge for surface treatment , 2005 .

[20]  Baldur Eliasson,et al.  Dielectric-Barrier Discharges. Principle and Applications , 1997 .

[21]  Richard A. Jones.  Polymer interfaces and the molecular basis of adhesion , 1997 .

[22]  A. Brablec,et al.  Atmospheric pressure glow discharge in neon , 2001 .

[23]  Cheng Cheng,et al.  Surface modification of polymer fibre by the new atmospheric pressure cold plasma jet , 2006 .

[24]  Surface modification with a remote atmospheric pressure plasma: dc glow discharge and surface streamer regime , 2005 .

[25]  Rino Morent,et al.  Surface modification of a polyester non-woven with a dielectric barrier discharge in air at medium pressure , 2006 .

[26]  G. Borcia,et al.  The surface oxidation of selected polymers using an atmospheric pressure air dielectric barrier discharge. Part I , 2004 .

[27]  G. Stevens,et al.  Adhesion enhancement of polymer surfaces by atmospheric plasma treatment , 2001 .

[28]  H. Baik,et al.  Analysis of polymer surface treated by dielectric barrier discharge , 2005 .

[29]  S. Schreiter,et al.  Penetration of plasma effects into textile structures , 2001 .

[30]  Sanborn C. Brown,et al.  Basic Data of Plasma Physics , 1961 .

[31]  B. Smirnov,et al.  Physics of Weakly Ionized Gases: Problems and Solutions , 1982 .

[32]  T. Takagishi,et al.  Effect of Corona Discharge on the Surface of Wool and Its Application to Printing , 1991 .

[33]  P. Erra,et al.  Wettability, ageing and recovery process of plasma-treated polyamide 6 , 2004 .

[34]  R. Morent,et al.  Penetration of a dielectric barrier discharge plasma into textile structures at medium pressure , 2006 .

[35]  R. Morent,et al.  Treatment of polymer films with a dielectric barrier discharge in air, helium and argon at medium pressure , 2007 .

[36]  R. W. Paynter,et al.  XPS studies of the ageing of plasma-treated polymer surfaces , 2000 .