Kinetics and stability in compressive and tensile loading of porous bodies

[1]  E. Olevsky,et al.  Effect of gravity on dimensional change during sintering—I. Shrinkage anisotropy , 2000 .

[2]  E. Olevsky,et al.  Effect of gravity on dimensional change during sintering—II. Shape distortion , 2000 .

[3]  J. Tirosh,et al.  Open die forging of porous materials , 1998 .

[4]  Eugene A. Olevsky,et al.  Theory of sintering: from discrete to continuum , 1998 .

[5]  E. Olevsky,et al.  Densification by sintering incorporating phase transformations , 1997 .

[6]  J. Lee,et al.  A Finite-Element Work-Hardening Plasticity Model of the Uniaxial Compression and Subsequent Failure of Porous Cylinders Including Effects of Void Nucleation and Growth—Part II: Localization and Fracture Criteria , 1996 .

[7]  Dong Nyung Lee,et al.  Analysis of hot forging of porous metals , 1996 .

[8]  E. Olevsky,et al.  HIPing conditions for processing of metal matrix composites using the continuum theory for sintering—I. Theoretical analysis , 1996 .

[9]  A. Cocks.  Overview no. 117 The structure of constitutive laws for the sintering of fine grained materials , 1994 .

[10]  R. McMeeking,et al.  Creep of Power-Law Material Containing Spherical Voids , 1991 .

[11]  M. Ashby,et al.  Pressure sintering by power law creep , 1975 .

[12]  E. Olevsky,et al.  Instability of sintering of porous bodies , 2000 .

[13]  D. Gethin,et al.  Model for Thermal Analysis in Cold Uniaxial Powder Compaction , 1998 .

[14]  T. Tsuta,et al.  The Specific Properties of the Critical Softening Point of Porous Material under Monotonic Uniaxial Stress Condition , 1997 .

[15]  J. Lee,et al.  A Finite-Element Work-Hardening Plasticity Model of the Uniaxial Compression and Subsequent Failure of Porous Cylinders Including Effects of Void Nucleation and Growth—Part I: Plastic Flow and Damage , 1994 .

[16]  K. T. Kim,et al.  Elastic-Plastic Response of Sintered Porous Iron Under Uniaxial Strain Cycling , 1993 .

[17]  Y. Cho,et al.  Hot Upsetting of Porous Alloy Steel Preforms , 1993 .

[18]  J. Duva,et al.  The densification of powders by power-law creep during hot isostatic pressing , 1992 .

[19]  Z. Marciniak,et al.  The mechanics of sheet metal forming , 1992 .

[20]  Pedro Ponte Castañeda.  The effective mechanical properties of nonlinear isotropic composites , 1991 .

[21]  A. Needleman,et al.  Sheet Necking—I. Validity of Plane Stress Assumptions of the Long-Wavelength Approximation , 1978 .