Belt-Driven Open Source Circuit Mill Using Low-Cost 3-D Printer Components

Barriers to inventing electronic devices involve challenges of iterating electronic designs due to long lead times for professional circuit board milling or high costs of commercial milling machines. To overcome these barriers, this study provides open source (OS) designs for a low-cost circuit milling machine. First, design modifications for mechanical and electrical subsystems of the OS Distributed 3-D (D3D) Robotics prototyping system are provided. Next, Copper Carve, an OS custom graphical user interface, is developed to enable circuit board milling by implementing backlash and substrate distortion compensation. The performance of the OS D3D circuit mill is then quantified and validated for: positional accuracy, cut quality, feature accuracy, and distortion compensation. Finally, the return on investment is calculated for inventors using it. The results show by properly compensating for motion inaccuracies with Copper Carve, the machine achieves a motion resolution of 10 microns, which is more than adequate for most circuit designs. The mill is at least five times less expensive than all commercial alternatives and the material costs of the D3D mill are repaid from fabricating 20–43 boards. The results show that the OS circuit mill is of high-enough quality to enable rapid invention and distributed manufacturing of complex products containing custom electronics.

[1]  Steven Weber,et al.  The Success of Open Source , 2004 .

[2]  Joshua M. Pearce,et al.  Emergence of Home Manufacturing in the Developed World: Return on Investment for Open-Source 3-D Printers , 2017 .

[3]  James M. Wilson,et al.  Henry Ford vs. assembly line balancing , 2014 .

[4]  Joshua M. Pearce,et al.  Open-Source 3D-Printable Optics Equipment , 2013, PloS one.

[5]  Joshua M. Pearce,et al.  Distributed Manufacturing of Flexible Products: Technical Feasibility and Economic Viability , 2017, Technologies.

[6]  Joshua M. Pearce,et al.  Global value chains from a 3D printing perspective , 2016 .

[7]  Jim Romeo Plastics Engineering's New Frontier: Embracing the Brave New World of 3D Printing , 2019 .

[8]  Joshua M. Pearce Return on investment for open source scientific hardware development , 2016 .

[9]  John Irwin,et al.  Life-cycle economic analysis of distributed manufacturing with open-source 3-D printers , 2013, Mechatronics.

[10]  Joshua M. Pearce Quantifying the Value of Open Source Hardware Development , 2014, Modern Economy.

[11]  Alicia Gibb,et al.  Building Open Source Hardware: DIY Manufacturing for Hackers and Makers , 2014 .

[12]  Joshua M. Pearce,et al.  Impact of DIY Home Manufacturing with 3D Printing on the Toy and Game Market , 2017 .

[13]  J Shane Purcell,et al.  A revolution in the making. , 2007, Family practice management.

[14]  Joshua M. Pearce,et al.  Open source low-cost power monitoring system , 2018, HardwareX.

[15]  Neil Gershenfeld,et al.  How to Make Almost Anything , 2012 .

[16]  Olaf Diegel,et al.  Wohlers Report 2018: 3D printing and additive manufacturing state of the industry: Annual Worldwide Progress Report , 2017 .

[17]  Rhys Jones,et al.  RepRap – the replicating rapid prototyper , 2011, Robotica.

[18]  Cherie Ann Sherman,et al.  A discussion of new business models for 3D printing , 2007 .

[19]  F. Fischler,et al.  The third Industrial Revolution , 2012 .

[20]  Adrian Bowyer,et al.  RepRap: The Replicating Rapid Prototyper: Maximizing Customizability by Breeding the Means of Production , 2010 .

[21]  Joshua M. Pearce Emerging Business Models for Open Source Hardware , 2017 .

[22]  Joshua M. Pearce,et al.  Reversing the Trend of Large Scale and Centralization in Manufacturing: The Case of Distributed Manufacturing of Customizable 3-D-Printable Self-Adjustable Glasses , 2014 .

[23]  Joshua M. Pearce Open-Source Lab: How to Build Your Own Hardware and Reduce Research Costs , 2013 .

[24]  Joshua M. Pearce,et al.  Open-Source Syringe Pump Library , 2014, PloS one.

[25]  Joshua M. Pearce,et al.  Open-source, self-replicating 3-D printer factory for small-business manufacturing , 2016 .

[26]  Lucia L. Prieto-Godino,et al.  Open Labware: 3-D Printing Your Own Lab Equipment , 2015, PLoS biology.

[27]  Rolla Milton. Tryon Household Manufactures in the United States, 1640-1860: A Study in Industrial History. , 1918 .

[28]  ニール ガーシェンフェルド,et al.  How to Make Almost Anything : The Digital Fabrication Revolution , 2012 .

[29]  Joshua M. Pearce,et al.  Building Research Equipment with Free, Open-Source Hardware , 2012, Science.

[30]  Charles H. Fine,et al.  Economic analysis of product-flexible manufacturing system investment decisions , 1986 .

[31]  BowyerAdrian,et al.  3D Printing and Humanity's First Imperfect Replicator , 2014 .

[32]  Joshua M. Pearce,et al.  Distributed manufacturing with 3-D printing: a case study of recreational vehicle solar photovoltaic mounting systems , 2015 .

[33]  Joshua M. Pearce,et al.  General Design Procedure for Free and Open-Source Hardware for Scientific Equipment , 2017 .

[34]  R. Lipsey,et al.  Towards an Explanation of National Price Levels , 1982 .