A Capacitive Sensor for the Measurement of Departure From the Vertical Movement

A capacitive sensor is proposed to measure the departure from the vertical movement. It has a special structure consisting of a long silica filament static plate and a cylindrical-surface moving plate. Now it is adopted to measure the horizontal displacement of the movable coil moving along the vertical direction in a joule balance. For the consideration of avoiding the error caused by the transfer process of direction reference, the sensor is designed to have a direct vertical direction reference. The measurement errors caused by the imperfection of the capacitive sensor plates are discussed. In addition, the characteristics of the sensor, such as sensitivity, resolution, and short-time stability, have been analyzed through experiments. The experimental results show that the resolution of the sensor is better than 0.05 μm, and the short-time stability is about 0.1 μm peak to peak, which is better than that of the alcohol mirror. The combined uncertainty of the capacitive sensor obtained through analysis and experiments is 1.68 μm.

[1]  P. Juncar,et al.  Optical alignment tool for the LNE and metas watt balance projects , 2010, CPEM 2010.

[2]  Greg E. Bridges,et al.  ``Zeptofarad'' (10 -21 F) resolution capacitance sensor for scanning capacitance microscopy , 2001 .

[3]  Vojko Matko,et al.  Next Generation AT-Cut Quartz Crystal Sensing Devices , 2011, Sensors.

[4]  Kofi A. A. Makinwa,et al.  Design, fabrication and characterization of a femto-farad capacitive sensor for pico-liter liquid monitoring , 2010 .

[5]  V. Matko,et al.  Temperature-compensated capacitance–frequency converter with high resolution , 2014 .

[6]  Kenichi Fujii,et al.  Alignment uncertainties of the NIST watt experiment , 1997 .

[7]  Qing He,et al.  Recent Development on the Joule Balance at NIM , 2011, IEEE Transactions on Instrumentation and Measurement.

[8]  B. Jeanneret,et al.  A New Magnet Design for the METAS Watt Balance , 2004, 2004 Conference on Precision Electromagnetic Measurements.

[9]  L. H. Ford.  The effect of humidity on the calibration of precision air capacitors , 1949 .

[10]  I A Robinson,et al.  Alignment of the NPL Mark II watt balance , 2012 .

[11]  S. Sherman,et al.  Single-chip surface micromachined integrated gyroscope with 50°/h Allan deviation , 2002, IEEE J. Solid State Circuits.

[12]  Marco Carminati,et al.  ZeptoFarad capacitance detection with a miniaturized CMOS current front-end for nanoscale sensors , 2011 .

[13]  Georg Schröbel Weg.  Techniques for blade tip clearance measurements with capacitive probes , 2000 .

[14]  Z. Zhonghua,et al.  The joule balance in NIM of China , 2014 .

[15]  Larry K. Baxter.  Capacitive Sensor Basics , 1997 .

[16]  Mikko Merimaa,et al.  A method for linearization of a laser interferometer down to the picometre level with a capacitive sensor , 2011 .