A tuned mass damper (TMD) is a device consisting of small damped spring–mass system attached to a vibrating main system in order to attenuate any undesirable vibrations. In this paper, optimum parameters of TMD system attached to a viscously damped single degree-of-freedom main system are derived for various combinations of excitation and response parameters. The excitation applied to the main system consists of external force and base acceleration modelled as Gaussian white-noise random process. Using numerical searching technique, the optimum damping and tuning frequency ratio of the TMD are obtained for minimization of various mean square responses such as relative displacement, velocity of main mass and force transmitted to the support. The optimum parameters of the TMD system and the corresponding response quantities are obtained for different damping ratios of the main system and the mass ratios of the TMD system. Explicit formulae for damper damping, tuning frequency and the corresponding minimized response are then derived using curve-fitting technique that can be conveniently used for applications in dynamical systems. The error in these expressions is found to be negligible and hence these expressions are convenient for use in damped single degree-of-freedom main system. The optimum damping ratio of the TMD is not much influenced by the damping of the main system. However, the optimum tuning frequency of TMD is significantly affected by the damping of main system. Lastly, a comparison of the optimum damping and tuning frequency of the TMD under filtered white-noise and white-noise excitation is also made. Copyright © 2006 John Wiley & Sons, Ltd.
[1]
G. B. Warburton,et al.
Minimizing structural vibrations with absorbers
,
1980
.
[2]
G. B. Warburton,et al.
Optimum absorber parameters for simple systems
,
1980
.
[3]
V. A. Bapat,et al.
Effect of primary system damping on the optimum design of an untuned viscous dynamic vibration absorber
,
1979
.
[4]
Yozo Fujino,et al.
Design formulas for tuned mass dampers based on a perturbation technique
,
1993
.
[5]
A. G. Thompson.
Optimizing the untuned viscous dynamic vibration absorber with primary system damping: A frequency locus method
,
1980
.
[6]
Hsiang-Chuan Tsai,et al.
Optimum tuned-mass dampers for minimizing steady-state response of support-excited and damped systems
,
1993
.
[7]
R. S. Jangid.
Optimum Multiple Tuned Mass Dampers for base‐excited undamped system
,
1999
.
[8]
G. B. Warburton,et al.
Optimum absorber parameters for various combinations of response and excitation parameters
,
1982
.
[9]
H.-C. Tsai,et al.
Explicit Formulae For Optimum Absorber Parameters For Force-Excited And Viscously Damped Systems
,
1994
.
[10]
R. S. Jangid,et al.
OPTIMUM MULTIPLE TUNED MASS DAMPERS FOR BASE-EXCITED DAMPED MAIN SYSTEM
,
2004
.
[11]
T. T. Soong,et al.
STRUCTURAL CONTROL: PAST, PRESENT, AND FUTURE
,
1997
.