RF power and SiOxCyHz deposition efficiency in TEOS/O2 discharges for the corrosion protection of magnesium alloys

Abstract The effect of the applied voltage of 27.12 MHz TEOS/O 2 /He discharges on the deposition process of SiO x C y H z thin films over rough as-cast Mg alloys was investigated by applying plasma diagnostics, surface characterization techniques and electrochemical impedance spectroscopy. The process efficiency in terms of power usage and deposition rate was calculated from plasma electrical and deposition rate measurements and was found to follow an inverse relation to the applied voltage, while saturating at higher voltages. Films with good substrate step coverage and free of cracks and structure failures were deposited at intermediate applied voltages and total power dissipation. As a consequence, the corrosion resistance of the films was optimized at the same conditions, indicating that in the case of no special pre-treatment of the Mg substrates, the corrosion performance is mainly determined by the SiO x C y H z adhesion to the substrate rather than the chemical composition of the films.

[1]  C. Winstead,et al.  Electron collision cross sections for tetraethoxysilane , 2002 .

[2]  E. Amanatides,et al.  Frequency variation under constant power conditions in hydrogen radio frequency discharges , 2001 .

[3]  Olivier Bonnaud,et al.  Tetraethylorthosilicate SiO2 films deposited at a low temperature , 2000 .

[4]  E. Amanatides,et al.  RF power effect on TEOS/O2 PECVD of silicon oxide thin films , 2005 .

[5]  A. Bui,et al.  Electrical properties of metal-polymer (polysiloxane)-silicon structures and application of polysiloxane to the passivation of semiconductor devices , 1976 .

[6]  M. Wertheimer,et al.  Corrosion protection by plasma-polymerized coatings , 1980 .

[7]  E. Amanatides,et al.  Gas phase and surface kinetics in plasma enhanced chemical vapor deposition of microcrystalline silicon: The combined effect of rf power and hydrogen dilution , 2001 .

[8]  M. T. Kim.  Deposition kinetics of silicon dioxide from tetraethylorthosilicate by PECVD , 2000 .

[9]  D. Mataras,et al.  Power dissipation and impedance measurements in radio‐frequency discharges , 1996 .

[10]  Sabrina Grassini,et al.  Electrochemical impedance spectroscopy evaluation of the corrosion behaviour of Mg alloy coated with PECVD organosilicon thin film , 2003 .

[11]  V. Godyak,et al.  Ion flux and ion power losses at the electrode sheaths in a symmetrical rf discharge , 1991 .

[12]  Antoine Goullet,et al.  Optical spectroscopic analyses of OH incorporation into SiO2 films deposited from O2/tetraethoxysilane plasmas , 2000 .

[13]  R. Carruthers,et al.  Plasma‐Enhanced Chemical Vapor Deposition of Silicon Dioxide Films Using Tetraethoxysilane and Oxygen: Characterization and Properties of Films , 1992 .

[14]  F. Palumbo,et al.  Application of plasma deposited organosilicon thin films for the corrosion protection of metals , 2003 .

[15]  Sabrina Grassini,et al.  Surface analysis of PECVD organosilicon films for corrosion protection of steel substrates , 2002 .

[16]  Do‐Heyoung Kim,et al.  Effects of process parameters on the growth of thick SiO2 using plasma enhanced chemical vapor deposition with hexamethyldisilazane , 2000 .

[17]  G. Bogart,et al.  Deposition of SiO2 films from novel alkoxysilane/O2 plasmas , 1998 .