High performance mixed-potential type NO2 sensors based on three-dimensional TPB and Co3V2O8 sensing electrode

[1]  G. Lu,et al.  High performance three-phase boundary obtained by sand blasting technology for mixed-potential-type zirconia-based NO2 sensors , 2015 .

[2]  G. Lu,et al.  High Performance Mixed-Potential Type NOx Sensor Based On Stabilized Zirconia and Oxide Electrode , 2014 .

[3]  Biao Wang,et al.  Highly sensitive mixed-potential-type NO2 sensor with YSZ processed using femtosecond laser direct writing technology , 2014 .

[4]  Norio Miura,et al.  A review of mixed-potential type zirconia-based gas sensors , 2014, Ionics.

[5]  Giang Hồng Thái,et al.  High sensitivity and selectivity of mixed potential sensor based on Pt/YSZ/SmFeO3 to NO2 gas , 2013 .

[6]  G. Lu,et al.  Mixed-potential type NOx sensor using stabilized zirconia and Cr2O3-WO3 nanocomposites , 2013, 2011 16th International Solid-State Sensors, Actuators and Microsystems Conference.

[7]  G. Lu,et al.  The effects of sintering temperature of MnCr2O4 nanocomposite on the NO2 sensing property for YSZ-based potentiometric sensor , 2013 .

[8]  Norio Miura,et al.  Sensing behavior of YSZ-based amperometric NO₂ sensors consisting of Mn-based reference-electrode and In₂O₃ sensing-electrode. , 2012, Talanta.

[9]  G. Lu,et al.  Mixed-potential-type zirconia-based NO2 sensor with high-performance three-phase boundary , 2011 .

[10]  E. Wachsman,et al.  NOx adsorption behavior of LaFeO3 and LaMnO3+δ and its influence on potentiometric sensor response , 2011 .

[11]  E. Wachsman,et al.  The effect of La2CuO4 sensing electrode thickness on a potentiometric NOx sensor response , 2011 .

[12]  J. Viricelle,et al.  Improvement of the NOx selectivity for a planar YSZ sensor , 2009 .

[13]  Stanley T. Omaye,et al.  Air pollutants, oxidative stress and human health. , 2009, Mutation research.

[14]  Chonghoon Lee,et al.  Sensing behavior and mechanism of mixed potential NOx sensors using NiO, NiO(+YSZ) and CuO oxide electrodes , 2009 .

[15]  Jens Zosel,et al.  Perovskite related electrode materials with enhanced NO sensitivity for mixed potential sensors , 2008 .

[16]  Briggs M. White,et al.  Effect of Electrode Microstructure on the Sensitivity and Response Time of Potentiometric NOX Sensors , 2008 .

[17]  E. Wachsman,et al.  NO2/NO response of Cr2O3- and SnO2-based potentiometric sensors and temperature-programmed reaction evaluation of the sensor elements , 2007 .

[18]  E. Wachsman,et al.  Sensing properties and selectivities of a WO3/YSZ/Pt potentiometric NOx sensor , 2007 .

[19]  Ralf Moos,et al.  Sensor for directly determining the exhaust gas recirculation rate—EGR sensor , 2006 .

[20]  Jian Wang,et al.  High-temperature operating characteristics of mixed-potential-type NO2 sensor based on stabilized-zirconia tube and NiO sensing electrode , 2006 .

[21]  N. Miura,et al.  Sensing Characteristics of YSZ-Based Mixed-Potential-Type Planar NO x Sensors Using NiO Sensing Electrodes Sintered at Different Temperatures , 2005 .

[22]  Jian Wang,et al.  NO x Sensing Characteristics of Mixed-Potential-Type Zirconia Sensor Using NiO Sensing Electrode at High Temperatures , 2005 .

[23]  Maria Luisa Grilli,et al.  Planar electrochemical sensors based on tape-cast YSZ layers and oxide electrodes , 2004 .

[24]  R. Glass,et al.  Effect of Cr2O3 electrode morphology on the nitric oxide response of a stabilized zirconia sensor , 2003 .

[25]  Norio Miura,et al.  Impedancemetric gas sensor based on zirconia solid electrolyte and oxide sensing electrode for detecting total NOx at high temperature , 2003 .

[26]  Norio Miura,et al.  High-temperature NOx sensors using zirconia solid electrolyte and zinc-family oxide sensing electrode , 2002 .

[27]  Norio Miura,et al.  Progress in mixed-potential type devices based on solid electrolyte for sensing redox gases , 2000 .

[28]  Norio Miura,et al.  Stabilized zirconia-based sensors using WO3 electrode for detection of NO or NO2 , 2000 .

[29]  Norio Miura,et al.  HIGH-TEMPERATURE POTENTIOMETRIC/AMPEROMETRIC NOX SENSORS COMBINING STABILIZED ZIRCONIA WITH MIXED-METAL OXIDE ELECTRODE , 1998 .

[30]  Norio Miura,et al.  Stabilized zirconia-based sensor using oxide electrode for detection of NOx in high-temperature combustion-exhausts , 1996 .

[31]  Norio Miura,et al.  Mixed potential type NO{sub x} sensor based on stabilized zirconia and oxide electrode , 1996 .

[32]  Jianzhong Xiao,et al.  The effects of sintering temperature of (La0.8Sr0.2)2FeMnO6−δ on the NO2 sensing property for YSZ-based potentiometric sensor , 2015 .

[33]  Maria Luisa Grilli,et al.  Nano-structured perovskite oxide electrodes for planar electrochemical sensors using tape casted YSZ layers , 2004 .

[34]  Norio Miura,et al.  Mixed-potential-type NOx sensor based on YSZ and zinc oxide sensing electrode , 2004 .

[35]  Norio Miura,et al.  High-temperature sensors for NO and NO2 based onstabilized zirconiaand spinel-type oxide electrodes , 1997 .