Effect of SWCNTs and graphene on the fatigue behavior of antisymmetric GFRP laminate

Abstract In this relatively unique study, the impact of adding nanoparticles (NPs) on the fatigue properties of antisymmetric glass fiber reinforced polymer (GFRP) laminate has been investigated. Antisymmetric GFRP laminates (+45/02/902/02/-45) were prepared and reinforced once with 0.1 wt% of single-walled carbon nanotubes (SWCNTs) and then with 0.1 wt% of Graphene nanoplatelets (GNPs). The NPs reinforced GFRP laminates are termed here GFNRP nanocomposites. Ultrasonication method was used to disperse the NPs using carefully chosen process parameters. Fatigue tests were analyzed based on S-N curves, stiffness degradation and hysteresis loops. The results showed that the use of 0.1 wt% of SWCNTs led to an increase in the fatigue strength coefficient (FSC) and the fatigue strength exponent (FSE) of GFNRP nanocomposite specimens by 51% and 24%, respectively, while the use of similar wt.% of GNPs enhanced the FSC and FSE by 33% and 25%, respectively. Consequently, fatigue life of GFNRP nanocomposites are surprisingly enhanced by about three and twelve times when GNPs and SWCNTs are used, respectively. The findings would give designers much more confidence in using antisymmetric composite laminates in specific elastic tailoring structures.

[1]  I. Martín-Gullón,et al.  Augmented fatigue performance and constant life diagrams of hierarchical carbon fiber/nanofiber epoxy composites , 2012 .

[2]  Fabrizio Scarpa,et al.  Tensile static and fatigue behaviour of sisal fibres , 2013 .

[3]  R.P.L. Nijssen,et al.  Fatigue life prediction and strength degradation of wind turbine rotor blade composites , 2006 .

[4]  A. Kinloch,et al.  The tensile fatigue behaviour of a silica nanoparticle-modified glass fibre reinforced epoxy composite , 2010 .

[5]  Anastasios P. Vassilopoulos,et al.  Fatigue of Fiber-reinforced Composites , 2011 .

[6]  F. Scarpa,et al.  Multi-axial mechanical characterization of jute fiber/polyester composite materials , 2016 .

[7]  J. Ferreira,et al.  Fatigue behaviour of glass fibre reinforced epoxy composites enhanced with nanoparticles , 2014 .

[8]  Karl Schulte,et al.  Damage mapping of GFRP via electrical resistance measurements using nanocomposite epoxy matrix systems , 2014 .

[9]  R. Ruoff,et al.  Chemical methods for the production of graphenes. , 2009, Nature nanotechnology.

[10]  V. Hadjiev,et al.  Improved mechanical properties of an epoxy glass–fiber composite reinforced with surface organomodified nanoclays , 2015 .

[11]  Mostefa Bourchak,et al.  Design and Analysis of a Morphing Composite Airfoil Using Unbalanced Layup and Unconventional Ply Angles , 2014 .

[12]  Fernand Ellyin,et al.  On matrix crack saturation in composite laminates , 2003 .

[13]  N. Phong,et al.  Improvement in the mechanical performances of carbon fiber/epoxy composite with addition of nano-(Polyvinyl alcohol) fibers , 2013 .

[14]  Z. Dang,et al.  In situ damage sensing in the glass fabric reinforced epoxy composites containing CNT–Al2O3 hybrids , 2014 .

[15]  T. Hsieh,et al.  Mechanical properties and tensile fatigue of graphene nanoplatelets reinforced polymer nanocomposites , 2013 .

[16]  Jiang Zhu,et al.  A strategy for improving mechanical properties of a fiber reinforced epoxy composite using functionalized carbon nanotubes , 2011 .

[17]  R. Butler,et al.  Anti-symmetric laminates for improved consolidation and reduced warp of tapered C-sections , 2015 .

[18]  K. Schulte,et al.  Improvement of fatigue life by incorporation of nanoparticles in glass fibre reinforced epoxy , 2010 .

[19]  Sung Kyu Ha,et al.  Load mitigation of wind turbine blade by aeroelastic tailoring via unbalanced laminates composites , 2015 .

[20]  H. F. Brinson,et al.  Matrix-Fiber Stress Transfer in Composite Materials Elasto-Plastic Model with an Interphase Layer. , 1988 .

[21]  Z. Su,et al.  On improvement of mechanical and thermo-mechanical properties of glass fabric/epoxy composites by incorporating CNT–Al2O3 hybrids , 2014 .

[22]  B. D. Agarwal,et al.  A theoretical study of the effect of an interfacial layer on the properties of composites , 1974 .

[23]  P. Viot,et al.  Preparation and mechanical characterisation of laminate composites made of glass fibre/epoxy resin filled with tri bloc copolymers , 2014 .

[24]  K. Singh,et al.  Fatigue life enhancement of quasi-isotropic symmetric GFRP laminate by doping MWCNTs , 2017 .

[25]  M. Genedy,et al.  Improving Fatigue Performance of GFRP Composite Using Carbon Nanotubes , 2015 .

[26]  K. Cox,et al.  Geometric scaling effects of bend-twist coupling in rotor blades , 2013 .

[27]  G. Papanicolaou,et al.  The effect of the boundary interphase on the thermomechanical behaviour of composites reinforced with short fibres , 1979 .

[28]  Ankit Gupta,et al.  Analysis of Mechanical Properties of Carbon Nanotube Reinforced Polymer Composites Using Continuum Mechanics Approach , 2014 .

[29]  S. Hallett,et al.  An investigation into the damage development and residual strengths of open-hole specimens in fatigue , 2015 .

[30]  Bodo Fiedler,et al.  The effect of carbon nanoparticles on the fatigue performance of carbon fibre reinforced epoxy , 2014 .