The Image Transceiver Device: Studies of Improved Physical Design

The Image Transceiver Device (ITD) design is based on combining LCOS micro-display, image processing tools and back illuminated APS imager in single CMOS chip [1]. The device is under development for Head-Mounted Display applications in augmented and virtual reality systems. The main issues with the present design are a high crosstalk of the backside imager and the need to shield the pixel circuitry from the photo- charges generated in the silicon substrate. In this publication we present a modified, “deep p-well” ITD pixel design, which provides a significantly reduced crosstalk level, as well as an effective shielding of photo-charges for the pixel circuitry. The simulation performed using Silvaco software [ATLAS Silicon Device Simulator, Ray Trace and Light Absorption programs, Silvaco International, 1998] shows that the new approach provides high photo response and allows increasing the optimal thickness of the die over and above the 10-15 micrometers commonly used for back illuminated imaging devices, thereby improving its mechanical ruggedness following the thinning process and also providing a more efficient absorption of the long wavelength photons. The proposed deep p-well pixel structure is also a technology solution for the fabrication of high performance back illuminated CMOS image sensors.

[1]  Bart Dierickx,et al.  CMOS active pixel image sensor with CCD performance , 1998, Other Conferences.

[2]  Kamran Eshraghian,et al.  Pixel structure effects on crosstalk in backwall illuminated CMOS compatible photodiode arrays , 2004, Proceedings. DELTA 2004. Second IEEE International Workshop on Electronic Design, Test and Applications.

[3]  Keiichiro Doi,et al.  5.3: Reflective AM LCD for Projection Displays: D‐ILA™ , 1998 .

[4]  John R. Tower,et al.  Scientific CMOS Pixels , 2002 .

[5]  R. Mountain,et al.  A new process for thinned, back-illuminated CCD imager devices , 1989, International Symposium on VLSI Technology, Systems and Applications,.

[6]  Uzi Efron,et al.  CMOS/LCOS-based image transceiver device: II , 2001, SPIE Optics + Photonics.

[7]  Michael E. Hoenk,et al.  A back-illuminated megapixel CMOS image sensor , 2005 .

[8]  Frank R. Libsch,et al.  Silicon light-valve array chip for high-resolution reflective liquid crystal projection displays , 1998, IBM J. Res. Dev..

[9]  A. R. Schaefer,et al.  Large area megapixel CCD arrays , 1990, Proceedings of the 33rd Midwest Symposium on Circuits and Systems.

[10]  Uzi Efron,et al.  A CMOS/LCOS image transceiver chip for smart goggle applications , 2004, IEEE Transactions on Circuits and Systems for Video Technology.

[11]  E. Fossum,et al.  CMOS active pixel image sensors for highly integrated imaging systems , 1997, IEEE J. Solid State Circuits.

[12]  Uzi Efron,et al.  A head-mounted, image transceiver-based, low vision aid , 2005 .

[13]  S. Sze.  Semiconductor Devices: Physics and Technology , 1985 .

[14]  Andres Cuevas,et al.  Determination of the surface recombination velocity of unpassivated silicon from spectral photoconductance measurements , 2003, 3rd World Conference onPhotovoltaic Energy Conversion, 2003. Proceedings of.

[15]  M. Lesser,et al.  CCD soft-x-ray detectors with improved high- and low-energy performance , 2003, 2003 IEEE Nuclear Science Symposium. Conference Record (IEEE Cat. No.03CH37515).

[16]  Hiroaki Ohkubo,et al.  High sensitivity and no-cross-talk pixel technology for embedded CMOS image sensor , 2000 .