Measuring two-phase flow in geothermal pipelines using sharp edge orifice plates

Abstract The measurement of the two-phase flow rate is very important for the geothermal industry. Among the many different measurement techniques available, the orifice plate stands out for its simplicity, low cost, and the ability to provide real time measurements. Several data sets from different geothermal fields in New Zealand, Indonesia, and the Philippines are used to evaluate existing correlations all of which are based on homogenous flow models. Then derive and test a new correlation based on separated flow model with time discrete liquid phase flow for a more accurate measurement of two-phase flow in geothermal pipelines using the orifice plate. The new correlation is now being implemented successfully in New Zealand and other countries.

[1]  Taek-Yong Kwon,et al.  Flow-rate measurements of a dual-phase pipe flow by cross-correlation technique of transmitted radiation signals. , 2009, Applied radiation and isotopes : including data, instrumentation and methods for use in agriculture, industry and medicine.

[2]  S. Olszowski,et al.  Measurement of dispersed two-phase gas-liquid flow by cross correlation of modulated ultrasonic signals , 1976 .

[4]  P. F. Bixley,et al.  Evolution of the Wairakei geothermal reservoir during 50 years of production , 2009 .

[5]  Yong Yan,et al.  Air–water two-phase flow measurement using a Venturi meter and an electrical resistance tomography sensor , 2010 .

[6]  M. Grant.  Geothermal Reservoir Engineering , 1982 .

[7]  Z. Lin.  TWO-PHASE FLOW MEASUREMENTS WITH SHARP-EDGED ORIFICES , 1982 .

[8]  J. W. Murdock.  Two-Phase Flow Measurement With Orifices , 1962 .

[9]  M. Anklin,et al.  Coriolis mass flowmeters: Overview of the current state of the art and latest research , 2006 .

[10]  L. Lynnworth,et al.  Ultrasonic flowmeters: half-century progress report, 1955-2005. , 2006, Ultrasonics.

[11]  M. L. Sanderson,et al.  Guidelines for the use of ultrasonic non-invasive metering techniques , 2002 .

[12]  Russell James,et al.  METERING OF STEAM--WATER TWO-PHASE FLOW BY SHARP-EDGED ORIFICES. , 1965 .

[13]  H. Kretzschmar,et al.  The IAPWS Industrial Formulation 1997 for the Thermodynamic Properties of Water and Steam , 2000 .

[14]  Roger C. Baker,et al.  Coriolis flowmeters: industrial practice and published information , 1994 .