论文信息 - Dynamic simulation and gravity balancing optimization of spot welding robot based on RecurDyn

Dynamic simulation and gravity balancing optimization of spot welding robot based on RecurDyn

Driving torques of a specific type of spot welding robot was simulated in RecurDyn, which provided useful information for motor selecting and gravity balancing. According to D-H parameters of the robot parts of the robot were modeled separately and then assembled to form the robot, in Pro/Engineer. Imported into RecurDyn and adding necessary constraints, the virtual prototype of the robot was constructed in RcurDyn for dynamic simulation. Time dependent torque variations of every joint were got by simulation, which facilitated motor selection. The spring for sustaining the gravity of robots links was also optimized through the simulation analysis of torques in Joint 2.

Yan-Shen Wang | Lian-Zheng Ge | Ping-Chun Xie | Yu-Xian Gai

[1] Sunil K. Agrawal,et al. Gravity-balancing of spatial robotic manipulators , 2004 .

[2] Dar-Zen Chen,et al. A stiffness matrix approach for the design of statically balanced planar articulated manipulators , 2010 .

[3] Mauricio Anigstein. About the Newton-Euler method , 1999, J. Field Robotics.

[4] J. Denavit,et al. A kinematic notation for lower pair mechanisms based on matrices , 1955 .

[5] H. Inada,et al. Modeling and Dynamic Analysis of Walking Robot by DADS , 2002 .

[6] Qingsong Xu,et al. Dynamic modeling and robust control of a 3-PRC translational parallel kinematic machine , 2009 .

[7] Dar-Zen Chen,et al. Design of a Gravity-Balanced General Spatial Serial-Type , 2010 .

[8] Sunil K. Agrawal,et al. Design and fabrication of an active gravity balanced planar mechanism using auxiliary parallelograms , 2001 .

[9] Vigen Arakelian,et al. Torque minimisation of the 2-DOF serial manipulators based on minimum energy consideration and optimum mass redistribution , 2011 .

[10] Soon-Jo Chung,et al. Cooperative Robot Control and Concurrent Synchronization of Lagrangian Systems , 2007, IEEE Transactions on Robotics.

[11] Bernd Schäfer,et al. Dynamics Simulation and Assembly Environment for Rapid Manipulator Design , 2002 .

[12] William M. Silver. On the Equivalence of Lagrangian and Newton-Euler Dynamics for Manipulators , 1982 .