A three-terminal non-volatile ferroelectric switch with an insulator–metal transition channel

Ferroelectrics offer a promising materials platform to realize energy-efficient non-volatile memory technology with the FeFET-based implementations being one of the most area-efficient ferroelectric memory architectures. However, the FeFET operation entails a fundamental trade-off between the read and the program operations. To overcome this trade-off, we propose in this work, a novel device, Mott-FeFET, that aims to replace the Silicon channel of the FeFET with VO2- a material that exhibits an electrically driven insulator-metal phase transition. The Mott-FeFET design, which demonstrates a (ferroelectric) polarization-dependent threshold voltage, enables the read current distinguishability (i.e., the ratio of current sensed when the Mott-FeFET is in state 1 and 0, respectively) to be independent of the program voltage. This enables the device to be programmed at low voltages without affecting the ability to sense/read the state of the device. Our work provides a pathway to realize low-voltage and energy-efficient non-volatile memory solutions.

[1]  S. Datta,et al.  A Threshold Switch Augmented Hybrid-FeFET (H-FeFET) with Enhanced Read Distinguishability and Reduced Programming Voltage for Non-Volatile Memory Applications , 2018, 2018 IEEE Symposium on VLSI Technology.

[2]  Suman Datta,et al.  Quantitative mapping of phase coexistence in Mott-Peierls insulator during electronic and thermally driven phase transition. , 2015, ACS nano.

[3]  N. Shukla,et al.  Evaluation of Bulk and SOI FeFET Architecture for Non-Volatile Memory Applications , 2019, IEEE Journal of the Electron Devices Society.

[4]  Narayanan Vijaykrishnan,et al.  Nonvolatile memory design based on ferroelectric FETs , 2016, 2016 53nd ACM/EDAC/IEEE Design Automation Conference (DAC).

[5]  A. A. Kocherzhenko,et al.  Simulation of dc conductance of two‐dimensional heterogeneous system: application to carbon wires made by ion irradiation on polycrystalline diamond , 2006 .

[6]  Ping Jin,et al.  Recent progress in the phase-transition mechanism and modulation of vanadium dioxide materials , 2018, NPG Asia Materials.

[7]  Kai Liu,et al.  Field-effect modulation of conductance in VO2 nanobeam transistors with HfO2 as the gate dielectric , 2011, 1107.5291.

[8]  Vijaykrishnan Narayanan,et al.  Synchronized charge oscillations in correlated electron systems , 2014, Scientific Reports.

[9]  Suman Datta,et al.  Electrically induced insulator to metal transition in epitaxial SmNiO3 thin films , 2014 .

[10]  Lee,et al.  Computationally Efficient Ferroelectric Capacitor Model For Circuit Simulation , 1997, 1997 Symposium on VLSI Technology.

[11]  Suman Datta,et al.  A computationally efficient compact model for leakage in cross-point array , 2017, 2017 International Conference on Simulation of Semiconductor Processes and Devices (SISPAD).

[12]  T. Ma,et al.  Guidelines for Ferroelectric FET Reliability Optimization: Charge Matching , 2020, IEEE Electron Device Letters.

[13]  S. Datta,et al.  Low power current sense amplifier based on phase transition material , 2017, 2017 75th Annual Device Research Conference (DRC).

[14]  Narayanan Vijaykrishnan,et al.  Overview of Ferroelectric Memory Devices and Reliability Aware Design Optimization , 2021, ACM Great Lakes Symposium on VLSI.

[15]  Tom Herrmann,et al.  Performance investigation and optimization of Si:HfO2 FeFETs on a 28 nm bulk technology , 2013, 2013 Joint IEEE International Symposium on Applications of Ferroelectric and Workshop on Piezoresponse Force Microscopy (ISAF/PFM).

[16]  M. Kawasaki,et al.  Collective bulk carrier delocalization driven by electrostatic surface charge accumulation , 2012, Nature.

[17]  Meng-Fan Chang,et al.  An offset-tolerant current-sampling-based sense amplifier for Sub-100nA-cell-current nonvolatile memory , 2011, 2011 IEEE International Solid-State Circuits Conference.

[18]  B. Douhard,et al.  Field Effect and Strongly Localized Carriers in the Metal-Insulator Transition Material VO(2). , 2015, Physical review letters.

[19]  Thomas Mikolajick,et al.  Review and perspective on ferroelectric HfO_2-based thin films for memory applications , 2018, MRS Communications.

[20]  Thomas Mikolajick,et al.  Ferroelectric Hafnium Oxide Based Materials and Devices: Assessment of Current Status and Future Prospects , 2015 .

[21]  R. Elliman,et al.  Threshold current reduction for the metal–insulator transition in NbO2−x-selector devices: the effect of ReRAM integration , 2015 .

[22]  Hiroshi Ishiwara,et al.  Current Status of Ferroelectric Random-Access Memory , 2004 .

[23]  Massood Tabib-Azar,et al.  Nano-Particle VO2 Insulator-Metal Transition Field-Effect Switch with 42 mV/decade Sub-Threshold Slope , 2019 .

[24]  K. Uchida,et al.  Modulation of VO2 Metal–Insulator Transition by Ferroelectric HfO2 Gate Insulator , 2020, Advanced Electronic Materials.

[25]  Gyungock Kim,et al.  Mechanism and observation of Mott transition in VO2-based two- and three-terminal devices , 2004 .

[26]  Ali Keshavarzi,et al.  FerroElectronics for Edge Intelligence , 2020, IEEE Micro.

[27]  M. Shalchian,et al.  Hybrid Electrothermal Model for Insulator-to- Metal Transition in VO2 Thin Films , 2021, IEEE Transactions on Electron Devices.

[28]  Hiroyuki Tanaka,et al.  Overview and Future Challenge of Ferroelectric Random Access Memory Technologies , 2007 .

[29]  Suman Datta,et al.  Nanoscale Structural Evolution of Electrically Driven Insulator to Metal Transition in Vanadium Dioxide , 2013 .

[30]  Massimiliano Di Ventra,et al.  Current oscillations in vanadium dioxide: Evidence for electrically triggered percolation avalanches , 2011, 1109.1834.

[31]  Y. Chauhan,et al.  Vanadium dioxide thin films synthesized using low thermal budget atmospheric oxidation , 2020, 2105.10264.

[32]  Meng-Fan Chang,et al.  An Offset-Tolerant Fast-Random-Read Current-Sampling-Based Sense Amplifier for Small-Cell-Current Nonvolatile Memory , 2013, IEEE Journal of Solid-State Circuits.

[33]  Challenges for Integration of Embedded FeRAMs in the sub-180 nm Regime , 2003 .