Microstructural Degradation Assessment in Pressure Vessel Steel by Harmonic Generation Technique

The harmonic generation technique has been used to characterize the isothermal degradation of pressure vessel steel. The isothermal degradation was conducted at 630°C with forged 2.25Cr-1Mo steel. The variation in the normalized ultrasonic nonlinearity parameter (β=β0) was interpreted as having resulted from microstructural evolution, which was supported by the results of electron microscopy and X-ray diffraction, in addition to Vickers hardness and ductile-brittle transition temperature. The normalized ultrasonic nonlinearity parameter increased progressively with the isothermal degradation time due to the increase in the volume fraction of equilibrium M6C carbide and the variation in the lattice parameter of M23C6 carbide. It was found that the nonlinearity parameter was very sensitive to the microstructure during the isothermal degradation of 2.25Cr-1Mo steel. The harmonic generation technique has the potential to assess microstructural changes due to isothermal degradation.

[1]  Il-ho Kim,et al.  Ultrasonic Linear and Nonlinear Parameters in Cyclically Deformed Cu and Cu-35Zn Alloy , 2005 .

[2]  Eric Hug,et al.  Magnetic characterisation of elastically and plastically tensile strained non-oriented Fe–3.2%Si steel , 2003 .

[3]  Y. Shirai,et al.  Fatigue Evaluation of Type 316 Stainless Steel Using Positron Annihilation Lineshape Analysis and β+-γ Coincidence Positron Lifetime Measurement , 2002 .

[4]  C. J. Ball,et al.  A quantitative X-ray diffraction and analytical electron microscopy study of service-exposed 2.25Cr–1Mo steels , 2001 .

[5]  William T. Yost,et al.  Nonlinear ultrasonic characterization of fatigue microstructures , 2001 .

[6]  J. Cantrell,et al.  Determination of precipitate nucleation and growth rates from ultrasonic harmonic generation , 2000 .

[7]  H. Ogi,et al.  Ultrasonic attenuation peak during fatigue of polycrystalline copper , 2000 .

[8]  K. Jhang,et al.  Applications of nonlinear ultrasonics to the NDE of material degradation , 2000, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[9]  D. Balzar,et al.  Nonlinear Ultrasonic Parameter in Quenched Martensitic Steels , 1998 .

[10]  Michiaki Kobayashi.  Ultrasonic nondestructive evaluation of microstructural changes of solid materials under plastic deformation—Part II. Experiment and simulation , 1998 .

[11]  P. Klimanek,et al.  Investigation of texture and dislocation density in rolled β-brass by X-ray and neutron diffraction , 1997 .

[12]  William T. Yost,et al.  Effect of precipitate coherency strains on acoustic harmonic generation , 1997 .

[13]  T. Mukherjee,et al.  Influence of long-term aging and superimposed creep stress on the microstructure of 2.25cr-1Mo steel , 1993 .

[14]  Yutaka Watanabe,et al.  The evaluation of in-service materials degradation of low-alloy steels by the electrochemical method , 1991 .

[15]  N. Cheruvu.  Degradation of mechanical properties of Cr-Mo-V and 2.25Cr-1Mo steel components after long-term service at elevated temperatures , 1989 .

[16]  C. Laird,et al.  Changes in morphology and composition of carbides during cyclic deformation at room and elevated temperature and their effect on mechanical properties of CrMoV steel , 1985 .

[17]  N. Ridley,et al.  Tempering of 2.25 Pct Cr-1 Pct Mo Low Carbon Steels , 1982 .

[18]  D. Taplin,et al.  Analysis of carbides formed during accelerated aging of 2·25Cr–1Mo steel , 1982 .

[19]  K. Kuo,et al.  Embrittlement of 21/4 CrMoV steel bolts after long exposure at 540 °C , 1981 .

[20]  R. Smith,et al.  Preliminary Results of a Program for Developing Fracture Toughness Data on Ferritic Nuclear Pressure Vessel Steels , 1976 .

[21]  K. Vedula,et al.  Spheroidization of binary Fe-C alloys over a range of temperatures , 1970, Metallurgical and Materials Transactions B.