Energetic and exergetic efficiency analysis of a v-corrugated solar air heater integrated with twisted tape inserts

[1]  P. K. Goyal,et al.  Prediction of behavior of triangular solar air heater duct using V-down rib with multiple gaps and turbulence promoters as artificial roughness: A CFD analysis , 2020 .

[2]  Azim Doğuş Tuncer,et al.  Energy-exergy and enviro-economic survey of solar air heaters with various air channel modifications , 2020 .

[3]  Ammar A. Farhan,et al.  Performance augmentation of a solar air heater using herringbone metal foam fins: An experimental work , 2020, International Journal of Energy Research.

[4]  R. Karthikeyan,et al.  Investigation of solar air heater with phase change materials using packed bed absorber plate , 2020 .

[5]  P. Randive,et al.  Energy and exergy analysis of plain and corrugated solar air collector: effect of seasonal variation , 2020 .

[6]  Sachin Kumar,et al.  Enhanced thermo-hydraulic performance in a V-ribbed triangular duct solar air heater: CFD and exergy analysis , 2020 .

[7]  M. F. El-Dosoky,et al.  An experimental investigation of the performance of new design of solar air heater (tubular) , 2020 .

[8]  Ammar A. Farhan,et al.  Analysis of exergetic performance for a solar air heater with metal foam fins , 2020, Heat Transfer.

[9]  Azim Doğuş Tuncer,et al.  Performance enhancement of a greenhouse dryer: Analysis of a cost-effective alternative solar air heater , 2020 .

[10]  N. Blair,et al.  Solar Engineering of Thermal Processes, Photovoltaics and Wind , 2020 .

[11]  Selçuk Darıcı,et al.  Comparative study on the performances of solar air collectors with trapezoidal corrugated and flat absorber plates , 2020 .

[12]  B. Sarkar,et al.  Solar Air Heater with Finned Absorber Plate and Helical Flow Path: A CFD Analysis , 2020 .

[13]  T. Gopi,et al.  Investigations on Improving the Efficiency of Solar Air Heater Using Extended Surfaces , 2020 .

[14]  T. Lundström,et al.  Performance improvement of a solar air heater by covering the absorber plate with a thin porous material , 2020 .

[15]  A. Layek,et al.  Energetic and exergetic performance evaluation of solar air heater with twisted rib roughness on absorber plate , 2019, Journal of Cleaner Production.

[16]  Ammar A. Farhan,et al.  The effect of metal foam fins on the thermo-hydraulic performance of a solar air heater , 2019, International Journal of Renewable Energy Research.

[17]  K. Sopian,et al.  A review of solar air flat plate collector for drying application , 2019, Renewable and Sustainable Energy Reviews.

[18]  A. Layek,et al.  Nusselt number and friction factor correlation of solar air heater having twisted-rib roughness on absorber plate , 2019, Renewable Energy.

[19]  A. Layek,et al.  Thermo-hydraulic performance of solar air heater having twisted rib over the absorber plate , 2018, International Journal of Thermal Sciences.

[20]  R. Kumar,et al.  Performance prediction of extended surface absorber solar air collector with twisted tape inserts , 2018, Solar Energy.

[21]  Abhishek Priyam,et al.  Effect of wavelength and amplitude on the performance of wavy finned absorber solar air heater , 2018 .

[22]  A. W. Kandeal,et al.  Influence of fin height on the performance of a glazed and bladed entrance single-pass solar air heater , 2018 .

[23]  Kamaruzzaman Sopian,et al.  Review on Exergy and Energy Analysis of Solar Air Heater , 2018 .

[24]  Ammar A. Farhan,et al.  Energy Analysis of Solar Collector With perforated Absorber Plate , 2017, Journal of Engineering.

[25]  S. Sharma,et al.  Investigations on thermal performance characteristics of wire screen packed bed solar air heater , 2016 .

[26]  A. Kabeel,et al.  Experimental investigation of thermal performance of flat and v-corrugated plate solar air heaters with and without PCM as thermal energy storage , 2016 .

[27]  V. Ozceyhan,et al.  Heat transfer enhancement in a tube with twisted tape inserts placed separately from the tube wall , 2012 .

[28]  Said Farahat,et al.  Analysis of exergy and parametric study of a v-corrugated solar air heater , 2012 .

[29]  T. K. Radhakrishnan,et al.  Experimental studies on heat transfer and friction factor characteristics of forced circulation solar water heater system fitted with helical twisted tapes , 2009 .

[30]  K. Sumathy,et al.  Study on the potential use of helical swirl generators in enhancing the thermal performance of solar air heaters , 2009 .

[31]  Kamaruzzaman Sopian,et al.  Analysis of single and double passes with and without porous media for V-groove absorber , 2007 .

[32]  Shyy Woei Chang,et al.  Turbulent heat transfer and pressure drop in tube fitted with serrated twisted tape , 2007 .

[33]  Azharul Karim,et al.  Performance investigation of flat plate, v-corrugated and finned air collectors , 2006 .

[34]  H. D. Ammari,et al.  A mathematical model of thermal performance of a solar air heater with slats , 2003 .

[35]  K. S. Ong.  Thermal performance of solar air heaters: Mathematical model and solution procedure , 1995 .

[36]  K. Hollands,et al.  Optimization of Flow Passage Geometry for Air-Heating, Plate-Type Solar Collectors , 1981 .

[37]  S. W. Hong,et al.  Augmentation of Laminar Flow Heat Transfer in Tubes by Means of Twisted-Tape Inserts , 1974 .