Experimental study and finite element analysis for piezoelectric impact energy harvesting using a bent metal beam

Linear uniform beams have been extensively investigated as a typical piezoelectric vibration energy harvesting mechanism in both conventional cantilever-beam-based harvester and a novel internal impact type energy harvester, the latter is of broad bandwidth and frequency up-converting capability and therefore quite suitable to low frequency ambient vibrations. To sufficiently utilize the space of the existing internal impact type energy harvester, a bent metal beam with distributed piezoelectric patches is proposed and investigated as the vibration energy harvesting module. A prototype harvester has been built and performances including the voltage and output power have been tested by experiments and analyzed by the finite element analysis. Both experiment and finite element analysis show that the proposed structure can effectively harvest vibration energy. And the optimal position for energy harvesting in this structure is also found. This work indicates that the frame of the existing internal impact type energy harvester may be used to harvest vibration energy, if it is bonded with distributed piezoelectric patches, which gives a way to increase its power density.

[1]  D. Inman,et al.  A Review of Power Harvesting from Vibration using Piezoelectric Materials , 2004 .

[2]  G. Harbauer,et al.  Implantable physiological power supply with PVDF film , 1984 .

[3]  Heath Hofmann,et al.  Optimized piezoelectric energy harvesting circuit using step-down converter in discontinuous conduction mode , 2003 .

[4]  S. Beeby,et al.  A novel thick-film piezoelectric micro-generator , 2001 .

[5]  S. Beeby,et al.  Energy harvesting vibration sources for microsystems applications , 2006 .

[6]  Siak Piang Lim,et al.  Modeling and analysis of micro piezoelectric power generators for micro-electromechanical-systems applications , 2004 .

[7]  Jan M. Rabaey,et al.  A study of low level vibrations as a power source for wireless sensor nodes , 2003, Comput. Commun..

[8]  Sang-Gook Kim,et al.  DESIGN CONSIDERATIONS FOR MEMS-SCALE PIEZOELECTRIC MECHANICAL VIBRATION ENERGY HARVESTERS , 2005 .

[9]  S. Priya.  Advances in energy harvesting using low profile piezoelectric transducers , 2007 .

[10]  Chunsheng Zhao,et al.  Vibration energy harvesting based on integrated piezoelectric components operating in different modes , 2010, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[11]  Daniel J. Inman,et al.  A Distributed Parameter Electromechanical Model for Cantilevered Piezoelectric Energy Harvesters , 2008 .

[12]  R. B. Yates,et al.  Analysis Of A Micro-electric Generator For Microsystems , 1995, Proceedings of the International Solid-State Sensors and Actuators Conference - TRANSDUCERS '95.

[13]  I. Kovacic,et al.  Potential benefits of a non-linear stiffness in an energy harvesting device , 2010 .

[14]  Henry A. Sodano,et al.  A review of power harvesting using piezoelectric materials (2003–2006) , 2007 .

[15]  Alex Elvin,et al.  A Coupled Finite Element—Circuit Simulation Model for Analyzing Piezoelectric Energy Generators , 2009 .