A new impinging jet test rig used to identify the important parameters in service erosion-corrosion in bayer liquor and to study the damage morphology

[1]  K. Bremhorst,et al.  The effect of flow patterns on the erosion-corrosion of shell and tube heat exchangers , 1991 .

[2]  E. Heitz,et al.  CHEMO-MECHANICAL EFFECTS OF FLOW ON CORROSION , 1991 .

[3]  M. Orazem,et al.  The Impinging Jet Electrode: Measurement of the Hydrodynamic Constant and Its Use for Evaluating Film Persistency , 1990 .

[4]  Ian M. Hutchings,et al.  Design of a slurry erosion test rig , 1990 .

[5]  Ewald Heitz,et al.  The Influence of Hydrodynamics on Erosion-Corrosion in Two-Phase Liquid-Particle Flow , 1989 .

[6]  Ian M. Hutchings,et al.  Thermal effects in the erosion of ductile metals , 1989 .

[7]  B. W. Madsen.  Measurement of erosion-corrosion synergism with a slurry wear test apparatus , 1988 .

[8]  Joseph C. S. Lai,et al.  The role of flow characteristics in corrosion-erosion of tube inlets in the inlet channel of shell and tube heat exchangers , 1979 .

[9]  Joseph C. S. Lai,et al.  Control of corrosion-erosion of tube inlets of shell and tube heat exchangers , 1979 .

[10]  D. Chin,et al.  Mass Transfer to an Impinging Jet Electrode , 1978 .

[11]  F. Giralt,et al.  Mass Transfer in Axisymmetric Turbulent Impinging Jets , 1977 .

[12]  Barry C. Syrett,et al.  Erosion-Corrosion of Copper-Nickel Alloys in Sea Water and Other Aqueous Environments—A Literature Review , 1976 .

[13]  F. Giralt,et al.  Mass transfer from crystalline surfaces in a turbulent impinging jet part I. Transfer by erosion , 1975 .

[14]  J. Postlethwaite,et al.  Effect of Slurry Abrasion on the Anodic Dissolution of Iron in Water , 1975 .

[15]  D. Chin,et al.  Mass Transfer to Point Electrodes on the Surface of a Rotating Disk , 1972 .

[16]  Robert Gardon,et al.  The role of turbulence in determining the heat-transfer characteristics of impinging jets , 1965 .

[17]  J. Postlethwaite,et al.  Erosion-corrosion in disturbed two phase liquid/particle flow , 1990 .

[18]  H. H. Le,et al.  The electrochemical behaviour of pressure vessel steel in hot bayer solutions as related to the scc phenomenon , 1990 .

[19]  D. C. Silverman.  Rotating Cylinder Electrode — Geometry Relationships for Prediction of Velocity-Sensitive Corrosion , 1988 .

[20]  K. Riedle,et al.  Empirisches Modell zur Berechnung von Materialabträgen durch Erosionskorrosion , 1986 .

[21]  B. Poulson,et al.  THE USE OF A CORROSION PROCESS TO OBTAIN MASS TRANSFER DATA , 1986 .

[22]  H. Martin.  Heat and Mass Transfer between Impinging Gas Jets and Solid Surfaces , 1977 .

[23]  R. Bayer.  Selection and Use of Wear Tests for Metals , 1976 .

[24]  R. N. Parkins,et al.  Stress-corrosion cracking of mild steels in sodium hydroxide solutions containing various additional substances , 1967 .